Jump to content

Aldi Brand Watches (Kripple Co. "ascot" And "sempre")


Recommended Posts

Hi all,

         I'd like some input as to the quality of the watches sold by Aldi and supplied to them by a German company called Kripple Co.  The brands are, variously, ASCOT or SEMPRE.

 

Every few months Aldi sells a bunch of watches via its catalogue specials.  Some are low price quartz and others are automatic movements with various complications in the dial.

 

Any opinions as to the quality of the watches and longevity of same?  I know they are a "supermarket special" but I'd like to know if they represent value for money.   (I have been asked about them by a good friend)

 

You can see some of the watches at the Kripple website:

 

http://www.krippl-watches.com/en/

Link to comment
Share on other sites

Perhaps some UK / EU members can enlighten us more, seeing that Aldi supermarkets are all over the place there.

 

As I wrote in the OP... Aldi has a special marketing tool that they use.  Twice a week they have a special catalogue (flyer- in the US) in which they list electronics, footwear, gardening tools...whatever.  They usually focus on a theme.  So one week they may have computer stuff...the next they might have cheaply-priced tvs.  About twice a year they have a sale that involves watches.  One of the sales concentrates on inexpensive quartz "fashion" watches and the other on more costly automatics and such.

 

I have one Aldi watch in my collection... an automatic "Ascot" brand watch that has been working well for the three years I've had it.  I could advise my friend on this experience alone but I hope that others here might chime in with their opinions as well.

Link to comment
Share on other sites

Hi stroppy,

 

As a collector, there is a point where all watches become "valuable" and "good"...my own experience, since I want them all! The truth is, no matter the "pedigree" of a watch, if it makes you tick -- pardon the pun -- you should get it -- if at all possible -- since the satisfaction of the watch lover is fulfilled that way.

 

On the other hand, if you want a "true" watch -- considering we have cells and other gadgets that tell time -- you should focus on history and quality of the brand. Example: an Omega watch, no matter how cheap the components inside, it will never be even comparable (as of today), with and Aldi watch no matter how much care it has been put into the building of the later. Omega being better of course. Then, some exceptions exist to make our life more difficult but this type of example, IMHO, is the general rule.

 

There is some more to the above: SEARS used to sell some stuff. Among them there were cheap pocket watches. Those watches were mechanical (ETA 6498 movement inside). They can still be gotten cheapish and they are the original UNITAS built. Nevertheless, nowadays it is, for most of us hobbyists and even watchmakers, a heaven of quality stuff...some 50+ years later! And what is best, newer ETA 6498-2 interchange, successfully, most parts with them. That said, I doubt there will be any quartz watch worth the trouble as we usually go about restoring mechanical movements like those. The beauty of quartz is that in most cheap watches -- and not so cheap ones -- we just change the movement when it breaks (if available), substitute the movement for a "compatible" one or simply thrash and buy new. One more reason to go the time honored -- and quality -- way.

 

Also, about Aldi, we had them in the mid west -- maybe still do, it's been a long time -- here in Miami, they are not in my area so I wouldn't be able to have an opinion of their products...back then, in my home town, I never saw watches in their flyers...I don't even remember the flyers! But, I believe as a rule of thumb that quality and "expensive" workmanship (without the price tag), is something of the past (SEARS example, back then, it was cheap, now it is quality) and the more time goes by, more poor quality and run-of-the-mill products will make their way into our everyday life...the quality, reliability and durability are being dissolved in time! IMHO.

 

I hope my opinion is not too far from the truth and if so, will be an eye opener to the watch lover/collector as far as what to wear on their wrist. Bottom line: if you like it, get it no matter the procedence but if you are picky about it, get whatever quality/good name is still being made...before it all becomes cheap garbage with inflated price tag!

 

Cheers,

 

Bob

  • Like 2
Link to comment
Share on other sites

  • 4 months later...
On 28 January 2016 at 2:41 PM, stroppy said:

Perhaps some UK / EU members can enlighten us more, seeing that Aldi supermarkets are all over the place there.

 

As I wrote in the OP... Aldi has a special marketing tool that they use.  Twice a week they have a special catalogue (flyer- in the US) in which they list electronics, footwear, gardening tools...whatever.  They usually focus on a theme.  So one week they may have computer stuff...the next they might have cheaply-priced tvs.  About twice a year they have a sale that involves watches.  One of the sales concentrates on inexpensive quartz "fashion" watches and the other on more costly automatics and such.

 

I have one Aldi watch in my collection... an automatic "Ascot" brand watch that has been working well for the three years I've had it.  I could advise my friend on this experience alone but I hope that others here might chime in with their opinions as well.

Hi living in the UK I have had experience of the ALDI Sempre brand 

In my opinion the quality of both the automatic (£25)  and the quartz chronograph watches (£15) are equivalent if not better than the middle range watch brands; In the UK the watches carry an ALDI 3 year warranty whereas most watches sold here only have a 1 year warranty

 

 

Link to comment
Share on other sites

14 minutes ago, dillm said:

In my opinion the quality of both the automatic (£25)  and the quartz chronograph watches (£15) are equivalent if not better than the middle range watch brands; In the UK the watches carry an ALDI 3 year warranty whereas most watches sold here only have a 1 year warranty

Not sure what do you mean with "better than middle range watch brands" but the fact that they can give 3 yrs warranty it's because is so cheap  that no matter how many replacements they give, they can still make a profit.

Link to comment
Share on other sites

On 6/14/2016 at 2:47 PM, jdm said:

I don't know but I'm puzzled by the small red hand, what it pretends to be for?

And i've spared you all the skeletons!

I have one, it works fine after I put the screw for the rotor back in. Never did figure out what the red hand is for :-)

Link to comment
Share on other sites

On 15/06/2016 at 5:01 AM, jdm said:

Automatic $15

Mechanical-Watch-Skeleton-Automatic-Self

I have the exact same watch (but with a silver dial).  The little red hand is driven by the second hand and is purely for decoration to make the watch look complicated and busy.  As regards quality; the "Winner" watches are okay.  They keep reasonable time and have a decent finish to them.  Not bad considering their cheap purchase price.  I believe their movements are iterations of the venerable Tong Ji SCM Chinese movement.

Link to comment
Share on other sites

Back OT. The Aldi watches are not the "supermarket rejects" that one might suppose.  The mechanical automatics often use Swiss movements, I'm told and the Quartz watches use either Miyota or Seikosha movements.  One thing about them is that if the case is marked as "stainless steel" then it is exactly that and usually well-finished.  I would rate Aldi's watches as being at the same level as the cheaper lines that large well-regarded watch companies produce.

 

P.S.  Sorry I have not been around much of late.  My own vascular movement decided to give up the ghost, almost terminating me (fortunately there were people around when it happened otherwise I'd be on a slab right now, or worse!).  I am recovering but it's taking time.

Link to comment
Share on other sites

2 minutes ago, oldhippy said:

stroppy, sorry to hear you've not been well. You take care and good luck to you.

Many thanks, my friend.  I used to be very easy-going about my health but after this experience I've decided I like breathing!:D

Link to comment
Share on other sites

Good to see you back and on the mend stroppy. I Know what you mean life seems to take on a whole new meaning and purpose my whole outlook to life changed after my stroke. Take time to recover and be well my friend.

Link to comment
Share on other sites

3 hours ago, Cad101 said:

Good to see you back and on the mend stroppy. I Know what you mean life seems to take on a whole new meaning and purpose my whole outlook to life changed after my stroke. Take time to recover and be well my friend.

Thanks mate.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hello everybody, sorry for the late reply. Thank you all so much for your help and your tips. I got lucky and found a replacement wheel bridge for cheap which actually ended up being in decent condition. I decided not to do anything about the mainspring barrel pivot since I didn't have the right tools and the barrel didn't have much endshake anyhow. I am happy to report that the watch now runs great, I have regulated it to about +-10/s day which is fine by my standards. The timegrapher result looks decent as well, although beat error is around 0.6ms which could be better I suppose. Amplitude reaches over 230 quite consistently which I'm happy with also. My lighter fluid has also been replaced by balance spring cleaning solution and now the springs don't stick to themselves anymore - who would have thought. I'm super happy with this watch, it might not be worth a whole lot but it's awesome that I could restore it and it makes me wear it with pride. To me it's a genuinely good lucking watch, it'll be my daily driver for a while. Thanks again to everybody for their input! I couldn't have done the repair without your help.   Here are some images for those interested, the bracelet isn't original but I don't really mind:    
    • Balance-hairspring system is oscillator with big Q-factor. When all in the movement is OK, the rate (frequency) is verry close to the own resonant frequency of the balance-hairspring. But in some cases, the movement (with foult) will force the resonator to work on pritty different frequency, sometimes faster, and sometimes slower. When this happens, the amplitude is always weak. So, the first thing to ask is what is the amplitude. If it is more than 180 and the hairspring doesn't touch itself and anything else, then for sure it is 'short'. If the amplitude is weak, then the first thing to do is to understand why and rectify the problem. At this time no point to check timekeeping. But, if one doubts that the hairspring is not correct, then He needs to calcullate the rate of the movement, then to 'vibrate' the balance-hairspring out of the movement and to measure the free oscillations frequency (period) with timer in order to ensure that they comply with the rate. If we have pictures, then it will be easier to tell something about that wheel.
    • So much work has gone into this! Thanks again @Jon. I will go back and check my adjustments from last weekend. A few questions for you, if you don't mind. In the reset position, I can understand the problem if the gap between the hammer and the minute counter heart is too big (slide 77) but what is bad about both hammers being in contact with the cams (slide 76)? I read somewhere that Landeron recommended grease on the runner cam, but the minute counter heart should be dry. Is that so, and why? How many tads in a ligne?
    • Could you glue two pieces together for rigidity and separate after forming? 
×
×
  • Create New...