Jump to content

Which Watch Have You Got Coming In The Mail ? Show Us !!!


SCOTTY

Recommended Posts

image.thumb.png.a36c68ab7132f3b62bc0cd146aa08dc5.png

Maybe this will be a donor, maybe I'll clean it up and add it to the collection.
Another USSR quartz. Hopefully a jewelled Luch 235X or a Poljot 2460.
At just over two quid,  and considering the seller claims it is running, I think it will prove an interesting purchase.

Edited by AndyHull
Link to comment
Share on other sites

So, I've enjoyed assembling and modding ETA 6497/6498 and Seiko watches. I realized last night that I wanted to buy a true "beater" watch -- something that I'd like wearing, but that I'd trust to be waterproof and rugged enough to wear everywhere. My wife commented yesterday that I frequently don't wear a watch despite having a nice collection, and I realized that it was because I'm really worried about damaging my really nice watches. Even my most rugged watch, a Seiko SKX779 black monster, has a lot of sentimental value and I don't want to beat it up any more than I already have in the ten years I've owned it.

As I've never owned or worn one of the Vostok watches, I decided to buy one. The specific model I was most interested in wearing, a Vostok Amphibia SE with a fully lumed dial, was sold out. No worries there, as I realized I could build myself something equivalent or better -- taking advantage of all the cool variations of case sizes and shapes that are available.

Here's what I have coming in the mail:

My plan is to swap out the dial and hands first. I think that the all-black hands will probably look best, but I'm super curious about the quality of the "heat blued" steel hands. I've been learning how to heat blue steel myself, and I'm dying to know what a $6 set of heat blued hands from Vostok are like. I'm a tiny bit suspicious of them; given the premium charged by other manufacturers for real heat blued steel, $6 is a huge bargain. For the all black hands, I'm very tempted to pull out the lume and see how they look as "skeleton" hands.

I haven't settled on whether I'll keep the stock chromed-brass bezel, or whether I'll like the SS bezel with a Seiko insert instead. I'm not looking at a super fancy sapphire or ceramic bezel insert, but want something that matches the overall aesthetic of the watch (with its industrial-finish steel and thick acrylic crystal).

In retrospect, I probably shouldn't have bought the US-made upgraded stainless steel bezel until I become 100% convinced that the chrome-plated brass Vostok bezels aren't what I want. Since they're readily available used for just a few bucks each, it would have been smarter for me to have just tried a couple of those options first. Adding the SS bezel (and buying a Seiko bezel insert) will push this watch out of cool-but-cheap-enough-to-beat-up sweet spot I'm looking for. Also, if I had just purchased the watch, dial, heat-blued hands, and mesh bracelet, I would have come right in at a total cost of $100. As purchased last night, I spent $150. With one of the fancier Seiko bezel inserts, this climbs to $200. ?

The base watch:

Vostok_Amphibian_090662.jpg.6ab9ba2caab8e93a86cdb3e9f45e2272.jpg

The fully-lumed dial glowing and under normal light:

Vostok-1.jpg.6255e55c227470355e71b6ecbdc6e1fd.jpgVostok-2.jpg.e10eeb7de7962477f889a5945e9d800a.jpg

The heat-blued steel hands and the black hands I'm thinking about skeletonizing:

Vostok_Amphibia_Blued_Hands.thumb.jpg.7bc9bb498c2a2e2aebd6088a5203c671.jpgVostok-Hands.jpg.d2037a30582f9b8c0a7e3f467674ba51.jpg

Edited by dpn
  • Like 1
Link to comment
Share on other sites

My mom handed me this Gubelin “Ball of Light” from the ‘20s and asked if I could do anything with it. It’s a manual wind 17-jewel movement that started up immediately when I wound it, so I’m not inclined to do anything with it other than find a necklace or charm bracelet to pair with it for my wife.

Kind of cool looking, though.439C61CA-3140-41B2-A255-3101F66071BF.thumb.jpeg.ecf1f0321289a34aeabac70fc6eff69a.jpeg

Edited by dpn
  • Like 3
Link to comment
Share on other sites

Very nice. The dial is perfect, and the lens like case back is in excellent condition too.

It has obviously been well cared for. 

A silver, or even white gold, medium weight chain would go well with it.

I wonder what it was originally attached to. It may well have been on a brooch or pin. Often these were very ornate and inlaid with precious stones.

 image.thumb.png.c4147f63afa865221df1188ab603c61c.png

This little example comes on a rose gold 14kt pin brooch, with a few rubies and a diamond, and a rather hefty price tag considering its diminutive size.

Perhaps a visit to your local craftsman jeweller might inspire you to marry it up with something of your wife's choosing. 

If the mechanism hasn't been serviced recently, then it might be worth getting that done, so that it has a chance of lasting another 100 years.

Link to comment
Share on other sites

  • 2 weeks later...

Whilst cleaning out my father in laws attic ready for a new roof my wife found this little Siro Oris watch. The hair spring is broken and the balance staff pivots are broken on first quick look and not sure what else has gone but some hope it winds and the hands move. 

 

6AFB4924-00BB-4EB3-9889-112A02E1987F.jpeg

  • Like 3
Link to comment
Share on other sites

AsPurchased-l1600.thumb.jpg.cecbf113034c615cb040a415e056c430.jpg

A Texas Instruments TI 401 LED watch in slightly rough but original condition.

AsPurchasedBracelet-l1600.thumb.jpg.5437f01c09a7628dd279ffe1ed61dfc6.jpg

I blew the budget (again) on this one, by a whopping sixteen pence.

AsPurchasedRear-l1600.jpg.bf4a2a673371bf70499458e4600cabc5.jpg

I pushed the boat out a little on this one, as I had recently been watching a couple of videos about the chip that powers this, and other similar vintage TI module based watches.

Obviously for this low price, the thing doesn't probably work, but I'm fairly confident that I should be able to remedy that.

You may find these two videos interesting.


https://www.youtube.com/watch?v=CeXYZKg5jdo
https://www.youtube.com/watch?v=KdLnEOwTO6E

Edited by AndyHull
  • Like 1
Link to comment
Share on other sites

If you wanted one of these back in 1976 it would have set you back $24.95 or to look at it another way $24.95 in 1976 is equal to $115.52 in 2020.


The top of the line model with the chrome plated case and steel band, which is what we have here was $44.95 which is around $208.13 in today's beer tokens.

image.thumb.png.124a912b08cecef5c0f60351f4d5ef69.png

A few years later and LED watches had vanished, and LCD watches from Hong Kong were being given away for free when you filled up your car at the local filling station.

Edited by AndyHull
Link to comment
Share on other sites

  • 2 weeks later...

I picked this orphaned pocket watch mechanism up for a quid.

I really grabbed it for the hands, as the hairspring looks to be too far gone to fix.

AsPurchased-l1600.thumb.jpg.92470147c265b63844c0107a553370cd.jpg

Intriguingly the name on the dial suggests that it is from New Zealand.

AsPurchasedRear-l1600.thumb.jpg.c5a4b648f75cf2246605d90d6e164f0c.jpg

The mechanism is obviously Swiss of course.

I do have a small pile of pocket watch hair springs, so perhaps I might take a crack at getting it going. I'm not sure what I would do with it if I succeed, maybe look for a suitable case, or maybe see if I can do something interesting with acrylic .

Link to comment
Share on other sites

34 minutes ago, Marc said:

Defeatist!!!!!!   ???

Hmmm... I'll reserve judgement on the hairspring till it arrives, I may be able to do something with it... floss my teeth perhaps.

All joking aside,  I have spent long enough flogging dead horse hairsprings to tend to admit defeat when the thing is no longer in one continuous piece. Whether I will be up to the task of replacing it, and more importantly replacing it with something that actually works, is another matter.

However with the long dark months of winter slowly closing in, and with a second lock down looking almost inevitable, I may be crazy enough or bored enough to try. We are also assuming that the balance staff is complete, if not, the chances of finding one of those is pretty remote, so I might have to make one of those too.....

<sarcasm>After all, I have a book that tells me how to do it, how hard can it be? </sarcasm>

Edited by AndyHull
Link to comment
Share on other sites

@AndyHull I jest of course....

I admire your optimism and enthusiasm in even contemplating such a hair spring. I would go so far as to suggest that the two halves may be successfully reunited using a granny knot with no noticeable detrimental impact on its current performance. ??

  • Haha 2
Link to comment
Share on other sites

3 hours ago, Marc said:

@AndyHull I jest of course....

I admire your optimism and enthusiasm in even contemplating such a hair spring. I would go so far as to suggest that the two halves may be successfully reunited using a granny knot with no noticeable detrimental impact on its current performance. ??

Now I know you are joking. Everyone knows only a reef knot would work.

Link to comment
Share on other sites

Apologies for being uncouth- I've not put in enough effort in the community lately due to a relocation, health issues, children schooling from home, and just the general "2020 malaise" but I've got another beauty in hand that I'd like to share.

This is a Jardur Bezelmeter (model 960), probably from around 1945, which I picked up from eBay this week.  It cost a pretty penny too but it's a piece that's been on my wishlist for a long time and this particular one ticked all the boxes.

IMG_2695.thumb.jpeg.2ba23ed03d29c7d1f75cea4e8024ca1d.jpeg

The Bezelmeter has an interesting history- from what I have read it was marketed primarily to aviators and military personal during the 1940's and according to legend was commonly sold through military post exchanges. Collectors seem to believe that the watches often served active service members. Advertisements from the period make it clear they were marketed as tool for the adventurous professional.

694430741_1944JardurAdvert.thumb.png.616f8e2d013f16486bb16372aba8ce37.png

1755532805_JardurAdvert.thumb.png.2c74930fb7b5bdf270be7468f835d5cf.png

Introduced more than a decade before the Navitimer and Breguet Type 20, it was certainly a watch ahead of it's time. It's quite a large watch at 38mm and exhibits all of those traits we usually associate with a Pilot Watch- luminous hands, blackened dial, tachymetre scale, and of course the chronograph function.  Specialty features include the countdown bezel and 180 degree scale on the dial (useful to pilots executing a standard rate of turn). The movement is shock protected, the case is stainless steel and water resistant with a screw down caseback and cork seals; all fairly unusual features for a watch of this age.

All the Bezelmeters I've seen house either a Valjoux 71 or 72 movement inside.  I prefer the former as the earlier Valjoux 71 Bezelmeters had slightly larger cases and sported the more elegant cathedral hands. The movement in my Bezelmeter needs a service (naturally) as it only runs for a few seconds. I can't wait to get to it but unfortunately I've already got a line of other watches to clear out first.

 

  • Like 6
Link to comment
Share on other sites

3 hours ago, RyMoeller said:

Apologies for being uncouth- I've not put in enough effort in the community lately due to a relocation, health issues, children schooling from home, and just the general "2020 malaise" but I've got another beauty in hand that I'd like to share.

This is a Jardur Bezelmeter (model 960), probably from around 1945, which I picked up from eBay this week.  It cost a pretty penny too but it's a piece that's been on my wishlist for a long time and this particular one ticked all the boxes.

IMG_2695.thumb.jpeg.2ba23ed03d29c7d1f75cea4e8024ca1d.jpeg

The Bezelmeter has an interesting history- from what I have read it was marketed primarily to aviators and military personal during the 1940's and according to legend was commonly sold through military post exchanges. Collectors seem to believe that the watches often served active service members. Advertisements from the period make it clear they were marketed as tool for the adventurous professional.

694430741_1944JardurAdvert.thumb.png.616f8e2d013f16486bb16372aba8ce37.png

1755532805_JardurAdvert.thumb.png.2c74930fb7b5bdf270be7468f835d5cf.png

Introduced more than a decade before the Navitimer and Breguet Type 20, it was certainly a watch ahead of it's time. It's quite a large watch at 38mm and exhibits all of those traits we usually associate with a Pilot Watch- luminous hands, blackened dial, tachymetre scale, and of course the chronograph function.  Specialty features include the countdown bezel and 180 degree scale on the dial (useful to pilots executing a standard rate of turn). The movement is shock protected, the case is stainless steel and water resistant with a screw down caseback and cork seals; all fairly unusual features for a watch of this age.

All the Bezelmeters I've seen house either a Valjoux 71 or 72 movement inside.  I prefer the former as the earlier Valjoux 71 Bezelmeters had slightly larger cases and sported the more elegant cathedral hands. The movement in my Bezelmeter needs a service (naturally) as it only runs for a few seconds. I can't wait to get to it but unfortunately I've already got a line of other watches to clear out first.

 

That is something else!? Love to see it again after you have done the restoration....?

  • Sad 1
Link to comment
Share on other sites

AsPurchasedFront-l1600.thumb.jpg.7af3136b511711c8ac7dcc93f16d20e9.jpg

AsPurchasedRear-l1600.thumb.jpg.e28d961cb27d1ea4ca0f14c558e94b8a.jpg

Another novelty watch for the 404 club. A Fero with a rather odd exhibition case back, and palm tree motif dial.

Listed as not working, and with the regulator suspiciously pushed to one side, I suspect this may need a bit of attention. I may also need to resort to some serious metal bashing skills to sort out that 1960s stainless band too, although that is almost certainly not original.

Edited by AndyHull
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Getting back to the issue which is us guys repairing or just enjoying horological exploits. The big worry now is how sound is Cousins as company going forward. The of cost if this 8 year legal battle will be astronomical. Cut backs will happen noticed already how the Cousins catalogue is half its size this year. The main supplier going out of business will hit the UK horological community in a big way.    On the Brexit issue it was about a sovereign country being able to make its own laws and trade with any country in the world. I cannot see what was wrong with this. For those who wish to re join the cost would be very high indeed.
    • Yes, it's the same (old) song and it's getting worse & worse;  
    • 🤔 leaving the EU meant that UK was no longer part of the convention and have already been turned down an independent reapplication. I'm pretty sure courts have to be held in Switzerland in this case. There will be a lot more watches stashed away in draws  tbh, folk wont be able to afford to maintain them. Cheap watches will be bought and top end watches by folk with plenty of cash that can pay for service and repair. The expensive once in a lifetime gifts and everything else inbetween will be at the forgotton when they stop working. I know i was being a numpty, get used to it 😄 Anybody that knows will boycott them, but besides repairers who will know. Nope will never buy one, i made that decision as soon as i learnt about this. 
    • although not in this case.  It was the Lugano Convention and its deficiencies that allowed a Swiss court decision in the first place.  This isnt really a Brexit issue at all.  A decision that affects both the EU and the UK should never have been heard in Switzerland. I bet the authorised service centres in the UK are pretty pleased.  It's a massive shame, though; I believe watch owners should be able to choose to have their watch serviced by whoever they trust.
    • Hi guys I think that old hippy is correct, it opens the gates for china to manufacture aftermarket spare parts. considering that they already do work on behalf of the Swiss I guess this decision gives the a little more legitimacy to tool up and I am sure they will take advantage of the situation either with or without the blessing of the Swiss watch industry  Having read about the protectionist machinations of the Swiss in the history of Europe they were the only ones to get fat at everybody else’s expense. I think the outcome could have been guessed at but ,  fair play to Cousins UK for standing up to them.  Now the question,  will everybody boycott Swiss watches and Swatch, no way they will still fill their coffers.  Me I stick with the Japanese once renowned for cheap shitty watches who came good through industrial effort and don’t for get the Russians that most dismiss as low grade crap. Wouldn’t buy a swatch product ever how about you all.? a
×
×
  • Create New...