Jump to content

Which Watch Have You Got Coming In The Mail ? Show Us !!!


SCOTTY

Recommended Posts

I've been on the lookout for one of those to join the 404 club, but with no luck so far. I suspect they are just a little too interesting and rare to fall in to the 404 budget, but you never know. I did pick up a scrap bumper movement in a bunch of other junk, which is now in the to-do pile, so there is a chance I might find one in a batch of other stuff.

My understanding is that there is a hammer and what is in effect a gong for the bell, a little like a clock striker.

http://www.ranfft.de/cgi-bin/bidfun-db.cgi?10&ranfft&&2uswk&Poljot_2612_1

https://17jewels.info/movements/p/poljot/poljot-2612-1/

The Poljot is pretty much a clone of the AS 1930

http://www.ranfft.de/cgi-bin/bidfun-db.cgi?10&ranfft&&2uswk&AS_1930

Edited by AndyHull
  • Like 3
Link to comment
Share on other sites

4 hours ago, KarlvonKoln said:

Does it strike against some kind of miniature gong?  Or is there some kind of bell that covers over the movement?  How does it work?

I'm afraid I'll have to return with my answers as I currently don't know. I believe I read somewhere that the alarm vibrates or buzzes, but we'll have to see.... Anyway, my impression is that these watches are popular among collectors of Russian watches and there are hundreds of them on eBay.

  • Like 1
Link to comment
Share on other sites

 

9 hours ago, jdm said:

Sorry that you are having problems, but please be aware that in general that jumper is not fragile at all, rather is of good design and easy to handle. Leave it above the date ring until all screws are in, then position and tighten. It never engages the corrector wheel.

Date ring and day disk. Measure and compare accurately.

Thank you, again, for this advice and for correcting my terminology.

Cheers,

Dan

Link to comment
Share on other sites

My wife mentioned that she missed having a Mickey Mouse watch, and so I took a chance on this lot of stuff from eBay. I'm actually looking forward to opening up the Saxony women's pocket watch the most, but I am definitely excited to open up Mr. Mouse and Mr. Duck and see if I can get them running. The only way I'll be disappointed with this auction is if all three of these watches end up being quartz.

saxony-crud.thumb.jpg.dc002718e6bb95ccafc3e2ffb6f8fd1c.jpg

Link to comment
Share on other sites

7 hours ago, VWatchie said:

I'm afraid I'll have to return with my answers as I currently don't know. I believe I read somewhere that the alarm vibrates or buzzes, but we'll have to see.... Anyway, my impression is that these watches are popular among collectors of Russian watches and there are hundreds of them on eBay.

They also turn up here in the UK with the Sekonda brand name. An ebay search for something like....  Sekonda ALARM USSR 18 Jewels ... will usually throw up a few likely candidates.

Sekonda pushed re-branded Poljot and other re-branded USSR era watches back in the day, and these are quite good value if you want to add an inexpensive Soviet period Russian watch to your collection.

The quality of some of these watches is actually reasonably good. Arguably not quite in the same league as top end Swiss timepieces, but on the whole, not bad, especially compared with other iron curtain time piece offerings (Ruhla and the like).

The USSR watch factories often used Swiss designs, but added their own engineering tweaks and quirks. 

  • Like 1
Link to comment
Share on other sites

3 hours ago, watchweasol said:

 Hi   I have a Mickey mouse one  a timex no less.

Strangely I haven't managed to add a Mikey Mouse watch to my otherwise Mickey Mouse collection.

Snoopy, yes. Chairman Mao,  a cow and a sausage, also but not Mickey.

Perhaps we should have a separate Mickey Mouse thread, as they are very popular.

s-l500.jpg

 

s-l1600.jpg

 

The "Mumbia special" Mickey Mouses (examples above) that flood the darker corners of ebay are a whole different story, and must be some of the most bizarre watch creations out there.  Seiko did actually produce some Mickey Mouses, but the two above, are almost certainly not amongst them. I think the biggest clue (and there are quite a few clues) is the "Japan Made" lettering, which is borrowed from genuine and copy HMT dials that often say "India Made".

I could be wrong of course and these may be the real Mick-coy. :P

Link to comment
Share on other sites

9 hours ago, AndyHull said:

They also turn up here in the UK with the Sekonda brand name.

Perhaps Sekonda is the name used to sell these Russian watches in Europe in general!? In Russia it seems these watches were sold under the name ПОЛЕТ (Cyrillic letters) which is basically pronounced POLJOT meaning "FLIGHT". Russian watches (Vostok) were the first I ever took apart, mostly because they made it super affordable to learn about service and repair. I believe I saw a YT video claiming that the Russian watch industry was built by watchmakers imported from Switzerland. I can't find that video now, but it makes sense since these Russian watches feel very similar to what I've seen in the ETA, Unitas, Omega, and AS movements that I've serviced. The two Japanese movements I've serviced, an Orient and a Seiko definitely feel different to work on.

Link to comment
Share on other sites

I've been away for a while and thought I'd ease myself back into the watch world but... ended up jumping in with both feet for this one-

s-l1600.thumb.jpg.6fd0dee62402d1b238e219f2786e8de3.jpg

I've wanted one of these for ages and figured the market had passed me by but now I get to do the happy dance! Can't wait to get started on this one. :thumbsu:

  • Like 7
Link to comment
Share on other sites

2 hours ago, Johnnie said:

Beautiful watch, now I want one!

It arrived late yesterday and looks even better in person (they always do). It's a marvel how much they packaged into a 35mm watch!  Gold plated with very little pitting and some small scratches on the dial. The start/stop pusher is a replacement as are the hour and minute hands; I should be able to get them sorted out though. The movement smells like my father's American Flyer train set.   

Link to comment
Share on other sites

  • 3 weeks later...

Found this and it's being delivered today. Unfortunately I don't know the model or if it's running. Seller doesn't know a thing about watches so she wasn't any help. From what I can tell the back should read
Milus
17 jewel
Incabloc
Stainless steel back
Swiss made
And some numbers but I won't know what until it comes.
It wasnt much so I thought it was worth a shot.

Any ideas as to the year and model, I'm unable to find another like it...237c9f543591bcd26abd3c2389a2dd45.jpga7a846f828bdca73b707eecff0c0c540.jpg

Sent from my SM-N975U using Tapatalk

  • Like 1
Link to comment
Share on other sites

On 9/4/2020 at 3:55 PM, Jimg1969 said:

Any ideas as to the year and model, I'm unable to find another like it.

image.thumb.png.4d24f310075edefe7291ad9f82aff026.png

Source => http://mikrolisk.de/show.php?site=280#sucheMarker

This might give you something to work on. If you open it up and show the caliber, then we might be able to guestimate a year for it. My guess is 1970s

Cleaning and servicing a movement that small can be a little bit more of a challenge than larger gents movements. Let us know how you get on with it.

Link to comment
Share on other sites

Two more for the club.

AsPurchased.thumb.jpg.970cb7aaf0fb9a635d4def0b7c320ffb.jpg

 

AsPurchasedRear.thumb.jpg.6497b6d95b3cb5a9bb9f4d41824f58ea.jpgFirst a Timex Big Q with date. This is French made and has a pusher (for the date?).
Not too bad for a mere 0.99p plus the postage.

AsPurchased.thumb.jpg.11f4a7c200c2777eb38f9b2f88c6230a.jpg

Next is a Carronade quartz PW which I bid 0.99p on simply because it has the distinction of bing both a Swiss quartz movement and officially fully endorsed "crap" since Carronade was a brand name of the legendary Gerald Ratner of "Ratners the Jewellers" fame (infamy?).

image.png.6ab24082cb30650b7a46a557706f5b19.png

For those of you who missed this particularly spectacular foot in mouth remark, see here for more -> https://en.wikipedia.org/wiki/Gerald_Ratner

 

Link to comment
Share on other sites

Great finds @AndyHull ... I wasn't aware of the kerfuffle, and found it highly entertaining:

Quote

 

We also do cut-glass sherry decanters complete with six glasses on a silver-plated tray that your butler can serve you drinks on, all for £4.95. People say, "How can you sell this for such a low price?", I say, "because it's total crap."

He compounded this by going on to remark that one of the sets of earrings was "cheaper than an M&S prawn sandwich but probably wouldn't last as long."

 

 

Link to comment
Share on other sites


I do not wear *wrist* watches often, but the alarm on this watch is just so doggone handy.  I can be forgetful.  I adore alarm watches.
http://d1v6dnm22vfd7d.cloudfront.net/monthly_2020_09/20200915_192232.thumb.jpg.b16db6dbf3749d5875f58992ffbbd9d7.jpg


An alarm watch is on my list to acquire after reading about them for the first time in a 1999 essay by William Gibson called “My Obsession”: https://www.wired.com/1999/01/ebay/

Gibson describes some of the delights and perils of eBay in a delightfully dated way that makes me miss my first Internet experiences circa 1995. Relevant to this thread, he waxes poetic about the charms of a Vulcain Cricket alarm watch.

Long story short: That’s a super cool find [mention]KarlvonKoln [/mention]!
  • Like 1
Link to comment
Share on other sites

1 hour ago, dpn said:

Gibson describes some of the delights and perils of eBay ... Relevant to this thread, he waxes poetic about the charms of a Vulcain Cricket alarm watch.

 

This one popped up on Etsy, as I recall.  The seller professed it to be functional, and his reviews seemed real and nearly-all positive.  On impulse I decided to go for it.  The price was very affordable.  I have read that the movement is identical to that in the Vulcain Cricket.

And the article spoke of a "Tamagotchi Gesture" in a very knowing manner.  I always called it "the fiddle-factor".  I had my pocket watches long before fidget spinners were a thing.  I have one with a skeleton movement that, during lulls in business, I can stare into and watch it work. They're little marvels which have practical purpose.  Some pay more for the kinds of jewelry which do nothing more than decorate.  I enjoy the added functional aspect of watches.

Link to comment
Share on other sites

AsPurchasedCropped.thumb.jpg.e38c933e55dd88913793249683c89e9c.jpg

I think I have all the parts needed to resurrect this one in my scrap bins. It is missing the crown and stem, and the keyless parts (clutch etc.)

I have a couple of scrap Seconda/Luch 2536 quartz mechanisms which have damaged coils, so assuming the coil in this one is good (which is a pretty bold assumption), I think I may be able to put it all back together.

It also obviously needs the full fumigation treatment to remove that potato field around the dial, and probably a new crystal.

If the coil is no good... well I'm down a whopping £4.00, unless and until I find a source of coils for 2536 coils.

Edited by AndyHull
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Yes I have that in my watch list a JUF if cheap enough I will have a go , if nothing else it will be good for spares, I have a few JUF’s
    • Less give a damn- more **BLEEP** it! …nice that it is keeping time I’ve done a couple of these (one with your assistance) and there’s a third that needs work on the tension between what drives the hands and the barrel. Did you have any issue with that? …and I saw Ranfft make a small comment in a thread re: pin pallets- a couple drops of Tillwich blu, let it run down the pins. It is good for 20 degrees of amplitude… I’m using this oil as a cheat code on my unmotivated Venus chrono…
    • This is a very sad day for the industry.. For most of us being amateurs the cost of replacing parts for ETA,s etc will be beyond affordability for the customers.   see full statement below   We have now received the decision from Judge Michael Green on whether or not the High Court has jurisdiction to hear our claim against Swatch, and sadly it is not the decision we had hoped for.   As we have pointed out in previous news items (see below),the rules that Judge Green had to apply strictly prevented him from examining in any way how the Swiss Court arrived at its verdict, even if it is blatantly obvious that the verdict is wrong.   As Swatch’s lawyer was summing up in the last few minutes oft he hearing, the Judge twice pinned him asking if it was alright if, as a result of the Swiss verdict, consumers had to pay 50% more for their watch repairs. After some stumbling, their lawyer’s reply was “Yes”, so  I am quite sure that Judge Green left his court fully aware that the Swiss verdict does not reflect the norms of British Competition Law. However, the rules simply do not allow him to take that simple fact into account.   Judge Green noted that our two arguments relating firstly to British Competition Law now being different from that of the EU, and secondly to the contention that the legality of the Authorised Service Networks has not been tested, had both been mentioned in the Swiss verdict. Because they had been mentioned, he felt that to allow us to argue them again would constitute re examining the Swiss case, and could not be allowed.   As to our claim that we were denied our right to be heard because our evidence was not considered, our lawyers had argued that the evidence we provided could not have been looked at because had the Swiss Court done so, it could not have reached the conclusion that it did. In his verdict, Judge Green highlighted general statements in the Swiss verdict that evidence had been looked at, and acknowledged the arguments we made to him, but again he considered that this was re-examining the Swiss verdict, and could not be permitted.   Our case has attracted considerable interest within the Legal community, and within minutes of the decision being made public we were approached for comment by one of the largest subscription news services, Global Competition Review. They asked us two very pertinent questions, and I reproduce them for you below along with our responses, as they neatly summarise the consequences arising from our case.   What are the key takeaways?   Enormous damage has been done to the fundamentals of UK and European Competition Law by the Swiss courts. It has always been the case that the effect on consumers and competition has to be considered in any decision making, but we now have a ruling that states even monopolists can remove wholesale markets from the supply chain without any consumer benefit based justification. Those entities looking to subvert Competition Law and exploit consumers for their own benefit will be looking at this very carefully.   Has the court made the wrong decision? If so, will you appeal?   The issue lies not with the High Court, but rather with cross border jurisdiction treaties that have no requirement in them for foreign jurisdictions applying UK law to take account of the Ratio Legis [a legal term for the fundamental reasoning why the law was written] of that law, and have no remedy within them for UK Courts to overcome decisions that clearly do not.    After eight years of work, and a very considerable sum in legal costs, I can not begin to tell you how disappointed I am at this outcome. For the time being, there is no further route through the British Courts that Cousins can follow. However, I promised that we would fight to the end, and that promise stands.   The UK is no longer part of the Lugano Convention, whose rules Judge Green has applied, and as yet nothing permanent has replaced it. The political tide turned against repair prevention by restricting supply of spare parts some time ago, and our efforts on behalf of the Watch Repair industry have resulted in high level contacts within several Government Departments. You can be sure that we will keep working to overcome this unjust situation that we now all find ourselves in.    I will keep you advised.   Kind regards   Anthony
    • Dell fancy a challenge🤣   https://www.ebay.co.uk/itm/285785684626?itmmeta=01HT29WVJY21Q94C73GYHGBTFX&hash=item428a277a92:g:15YAAOSwNRVmBAUz&itmprp=enc%3AAQAJAAAA0DIe4QLQBW66rSyIMiyBuk8GY%2B86pQ%2BQnxGbcNq7egAGe5DIs9YMmiWJIbZtMSxwNJIiJxuojbq523IeUSBQ6pJEIQ0tfz2ChrBR03BksmKINyklg1IK4GAfAcYY9Hta9wVeSZSZN7ZCNAfZTgKs9c4%2BUIUZ3Qjc3QjUXDn2uPRo1FiYOEewMG5A26EXb%2BclBgrqtbOmM6P3bea%2F8ZImOAXNI1HtbmtMk84pIGoM6ISwaM1PKFuADtTFMccS5e3ZjndCbXYXHrW3CecsV0edw3M%3D|tkp%3ABk9SR8q588nQYw Darwin’s theory of evolution has not been proven to be absolutely.  😀 
    • A already know the size movement I have the problem is the dial a had purchased has a dimension 20.6mm wide a want to find a watch case that going to fit the dial perfectly 
×
×
  • Create New...