Jump to content

Which Watch Have You Got Coming In The Mail ? Show Us !!!


SCOTTY

Recommended Posts

33 minutes ago, oldhippy said:

I did.

OH, my apologies.

having gone back and re-read the article myself in a little more detail I can see the source of my confusion. It would seem that "gunmetal" is a bit of an ambiguous term, referring as it does to both a specific alloy, and also to a colour.  A bit like like "silver" which is both a metal and a colour.

Link to comment
Share on other sites

Ah... hence the confusion. "Gunmetal finish" on steel, as opposed to "gun metal", i.e. red brass, bronze, or cannon bronze.

Well, lets see what arrives in the post. If it is "gunmetal finish", then I'm going to have to figure out how to clean it up without loosing the black finish.

Link to comment
Share on other sites

32 minutes ago, Marc said:

OH, my apologies.

having gone back and re-read the article myself in a little more detail I can see the source of my confusion. It would seem that "gunmetal" is a bit of an ambiguous term, referring as it does to both a specific alloy, and also to a colour.  A bit like like "silver" which is both a metal and a colour.

Thats all right. There was no need to apologise. I good debate is what its all about.

Link to comment
Share on other sites

This is currently on the way to me. It's the first brand new watch that I've purchased in many, many years. No special occasion but the watch commemorates 1963, the year I graduated from high school. It is 42.5 mm in diameter which is right in the size range I prefer. It comes with either a black or silver bezel. I wanted the silver which was out of stock so I waited just a bit. If purchasing a new "anything" one should receive his heart's desire, not just what happens to be available. 

This one features a Miyota 6S20 movement with the smooth second hand. I've not personally seen that feature so I'm looking  forward to it although, the normal one second advancement of a quartz second hand is not an issue for me. According the the USPS tracking system, it is scheduled to arrive on Monday, 4/29. Can't wait to see it up close and personal.

Dan_Henry_1963_Pilot_Chronograph_Silver_1300x.png

  • Like 2
Link to comment
Share on other sites

6 hours ago, AndyHull said:

Ah... hence the confusion. "Gunmetal finish" on steel, as opposed to "gun metal", i.e. red brass, bronze, or cannon bronze.

Well, lets see what arrives in the post. If it is "gunmetal finish", then I'm going to have to figure out how to clean it up without loosing the black finish.

@AndyHull assuming gunmetal finish your best bet may well be to polish it up to a bright steel finish and then re-blue it with a gun bluing kit. There are plenty of them about that are a lot simpler than the hot caustic process described in the link that I posted. Just google DIY gun bluing

Link to comment
Share on other sites

s-l1600.jpg

What can I say. I'm a sucker for a blue dial, and anything with that 70s vibe. This ticks both boxes. It also allegedly does tick, but stops.. and apparently has 17 jewels, but there were no pics of the movement, so another pot luck watch.

The winning bid was ... drumroll ... yes, you guessed it, exactly £4.04 - so no surprises there folks. :¬)

Edited by AndyHull
Link to comment
Share on other sites

s-l1600.jpg

More low cost fun. Just a little over three and a half quid each. My guess is, possible franken-dial, probably original and probably original. I spent more on two coffees and a couple of sticky buns in the supermarket cafe yesterday.

  • Like 4
Link to comment
Share on other sites

On 5/4/2019 at 12:24 PM, AndyHull said:

s-l1600.jpg

More low cost fun. Just a little over three and a half quid each. My guess is, possible franken-dial, probably original and probably original. I spent more on two coffees and a couple of sticky buns in the supermarket cafe yesterday.

Nice! I love HMT.

That purple faced one, I have a 'vintage genuine' swiss Henri Sandoz with the exact same colour and applied indices and numerals haha. Slight patterning but otherwise much the same.

Good old Indian eBay.

Edited by m1ks
Link to comment
Share on other sites

  • 2 weeks later...

Having worked my way through quite a lot of the last batch of oddities standing at the door of the "404 Club" clamoring to get in, I decided I hadn't suffered enough, so I popped a bid on this.

s-l1600.jpg

Advertised as a "Vintage Men’s TIMEX automatic day/ date, watch not working", and given its insanely scruffy appearance, and that dial, (and the resultant rock bottom price of course) how could I resist. It looks like a real gem in the rough.  I sense a lot of cleaning, oiling and polishing is likely to be required. I will of course keep you all posted as to its progress.

Link to comment
Share on other sites

AsPurchased2.jpg.e411205c73fdd4fa7ee537384d572877.jpg

I spotted this unloved 1940s or 1950s charmer, put my usual bid on and got it for considerably less, so I now own an "Ostalba 15 jewels - Swiss Model"

I have no idea what is inside, but the seller did claim it is "in working order". How could you not love this little gem?

Edited by AndyHull
  • Like 1
Link to comment
Share on other sites

Many years ago, when the world was young, I picked up some dead "talking watches" in Tandy (the UK brand name of RadioShack).

I managed to get a couple of them to function, however their whereabouts is now a mystery. While trawling the bargain basement of ebay's watch lots, I have seen quite a number of talking watches, but they invariably go for a lot more than the 404 club rules allow.

s-l1600.jpg


However I saw a couple of these today, and put my pocket money bid on them fully expecting them to go for nearer £20 to £30. However I was wrong. I now have two talking watches heading my way, for the princely sum of £2.30 each +P&P

More novelty items for the collection.

  • Haha 1
Link to comment
Share on other sites

AsPurchased2.jpg.f41459be87d15811c436017b87680007.jpg

Dial looks original.

It should be the Yin to the Yang of the one I posted above. As a bonus, the seller claims it actually works, which is a relative rarity for prospective 404 club members.

I think I may swap out the steel strap though.

Edited by AndyHull
  • Like 1
Link to comment
Share on other sites

On 5/20/2019 at 2:40 PM, AndyHull said:

AsPurchased2.jpg.e411205c73fdd4fa7ee537384d572877.jpg

I spotted this unloved 1940s or 1950s charmer, put my usual bid on and got it for considerably less, so I now own an "Ostalba 15 jewels - Swiss Model"

I have no idea what is inside, but the seller did claim it is "in working order". How could you not love this little gem?

Never seen a watch marked ''Swiss Model''

Link to comment
Share on other sites

A couple more HMTs. They look suspiciously franken, but at three quid each, and claimed to be working, I couldn't resist.

TwoJanatas2.thumb.jpg.428b2596392b011c208f07636a5dd561.jpg

I'm still waiting for a chance to go through the small collection of HMTs, and get them all back to a clean wearable, serviceable condition. I also have a few new faces in the Timex pile that need some TLC. I will of course post some pics when I get somewhere with them.

Edited by AndyHull
Link to comment
Share on other sites

.. and finally on my very slow slide in to horologicaly induced  bankruptcy..  six quid + p&p secured this lot.

s-l1600.jpg&key=53d3755b969d5ce851d4c48591e1c5a8974f825877a3db102b97769ac593d9dc

I've got a similar lensed visor but it came with more lenses. It has two slots to mount them simultaneously but I think that's a gimmick more than a useful feature.

I like the magnifying station, very useful. What power is the magnification?

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Welcome my friend. 
    • Been there. Worn that Tshirt.  'ping'. Hands and knees. Nothing. Nada. 20 minutes? Ha! I found it 7 month later. How? Well, after advice from a member, I invested in a £4 UV light torch.  Hands and knees looking for a 'ping' from a Sekonda, found them both within 30 seconds. UV makes the jewel shine. easy peasy. Could have taken longer. Just lucky on the location of the search. Hope this helps.
    • Thanks Dell. I thought about silver soldering. Have never done it but would like to give it a go. Do you think to put flux on the butted joint then run the solder in or to maybe brace it with a piece of scrap spring steel?
    • Never and others. Yes, like you I do spend a fair amount of time reading the contents of this forum. I find it better that any other. Clear, lucid, no Prima Donas, and most of all an easy access without adverts. All thanks to Mark. God bless you mate. You give so much to many of us. What if? No Mark? Hypothetically. A forum. I did run a forum for a few years. Really enjoyed it, but became so engrossed that it did affect my health. I gave to to others to run. Not been back. It was very successful and rivalled a number of large paying sites. No adverts, no others but me. I did ask and listen to members comments and it worked well.    Costs Having a domain name, £10 annually.  Register the site with a forum company, free. Build the site using the forum company guide lines, free. It looked and ran almost the same a Mark's. All the same facilities. The cost was only £5 per month, but counted visits (views). If I recall, it was that price for 5,000 views. Each extra 5,000 views increased the price by £2 per month. Success was my own personal undoing. From £5 per month initially, it rose to £60 a month and looked like increasing. This was 10 years ago. I could not afford that, and asked it anyone would like to take over and someone did. I would assume that this is the price that Mark is funding for us all. His return is our continued comments on the internet about his course, and the fact that many of the big names on YouTube mention him as their Tutor. Those of us who have done, and are still using, his course, benefit. In comparison to other courses, I can't believe how cheap it is, and the value is exceptional. It is the structure that gives the value. Long may Mark reign. Ross  
    • Hi all, total newbie to watchmaking and I've had a bit of a mishap. Just completing level 2 and was doing ok, but I was just on the last part of the reassembly of my ST3620 when the balance end stone shot across the room, just as I was trying to see if I had put the correct amount of oil between it and the balance end, aarrrgh! Been on my hands and knees combing the carpet for 20mins looking for it but to no avail. Does anybody know where I can get a replacement from and what to look for please?? Thanks.
×
×
  • Create New...