Jump to content

Case Opener


hokavan

Recommended Posts

It looks like a screw type. If correct it will depend on how tight it is for the method used to remove. The sticky ball method is not good for the really tight one,s. Some members have attached a bolt to the back using supper glue undoing with a spanner then cleaning the back afterwards. 

Last year I bit the bullet & purchased a Horotecc case opener which is the best opener for the screw types, but you still need the appropriate die,s for the various makes.

 

 post-234-0-63617000-1453553060.png

 

 

A better pic will help.

  • Like 2
Link to comment
Share on other sites

If the case back has serrations does that mean your looking for jaws with a triangle end that you attach and turn anticlockwise? I've never come across this type of case back

Sent from my SM-G900F using Tapatalk

here is the correct tool for Rolex type case backs 

550f42b6-3b30-4a16-a2fa-a265da3c4768_zps

Edited by Andyclient
  • Like 1
Link to comment
Share on other sites



×
×
  • Create New...