Jump to content

Hello, I'm Back :-)


Recommended Posts

Well after absconding to a friends beach house on 23 of December, and not getting back until this weekend I've been devoid of watch talk and only a wardrobe of three watches. My Suunto Core Black, the Citizen Airwave and my Junkers "Iron Annie".

 

I still haven't got my other 50 or so out of the safe yet, it takes longer to unpack and get re-organised from a holiday than it does to get ready for it!

 

I have a couple of projects I need to tackle, one is a simple little mechanical based on an AS movement, the next is "The Pogue". I have the replacement bits for that but being my first chrono I'm going to tread very carefully.

 

Good to see we are all enjoying this fascinating/frustrating little hobby and I'll be back with some input soon.

 

Cheers

 

Jim

 

(A pic from the holiday)

 

post-1141-0-53598300-1453202469_thumb.jp

  • Like 2
Link to comment
Share on other sites

  • 3 weeks later...
  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • That would be something! Which brings me back to;  
    • you think you're going to sleep tonight you're not, you're going to ponder the question of what makes you think those of the right parts?  
    • Does anyone knows what size case a need for a dial diameter 20.60mm?
    • Sounds like the story with my Rolex. Poor (expensive) job done by an official Rolex dealer with an "in-house" watchmaker, hence I learned watchrepair and did the servicing myself. Same story as I learned with the Omega 861, again poor job by an "in-house" watchmaker by an official Omega dealer. Once your watch goes through that back-door, you have no idea what is going to happening to it 🫣   Quite nice that they sent back the parts which had been replaced !
    • yes that's definitely not right at all. I have a picture one of my friends has a Omega coaxial there was having issues to lose asking me where he should send it. As that's a specialty watch I suggested the service center. When he got it back he sent me a picture so the replace the dial as you can see the hands the mainspring barrel and I think the price was really quite decent considering all the stuff they can replace. So I do know they do change the barrels but the other person I worked at the service center when I would ask questions and unfortunately I can't remember all the answers. I think a lot of the changing a parts is at the discretion of the watchmaker. Plus I don't know enough about the chronographs and whether that would be considered a vintage watch? I take some of the vintage watches may have been sent directly to Switzerland or another service center. Obviously with a watch like the one down below they probably have a infinite supply of parts is its relatively modern vintage stuff becomes more interesting even the watch companies don't have necessarily infinite supply of parts. But no matter what the watch shouldn't disintegrated six months that's definitely an issue.        
×
×
  • Create New...