Jump to content

Smiths Streamline


Recommended Posts

Not strictly a walk through but just a few notes & pics on my latest rebuild, this being a Smiths Streamline, C60 calibre with date from 1966.

 

As received non running minus the knackered strap & badly scratched crystal:

post-80-0-06951000-1448313487_thumb.jpg

Note the the damage to the lugs, probably caused by a poorly fitting metal strap some time in its life. Just something we will have to live with.

 

Out of the case:

post-80-0-23037500-1448313489.jpg

 

Under the dial:

post-80-0-89569100-1448313491_thumb.jpg

post-80-0-66879200-1448313494_thumb.jpg

 

& turn it over:

post-80-0-04580900-1448313497_thumb.jpg

post-80-0-69086700-1448313499_thumb.jpg

 

The mucky mainspring:

post-80-0-30777200-1448313501.jpg

 

Cleaning, oiling & re-assembly was fairly straightforward although the pivots proved a bit of a pain to line up and the cap jewels were not the easiest, but all went well in the end. The dial was in particularly good nick, after the Rodico + spit & cotton bud treatment. With a new strap and crystal this is what we get:

post-80-0-94505600-1448313484_thumb.jpg

Keeping time within +/- 5 seconds a day, a low 206 degrees amplitude (original mainspring) & amazingly no beat error.

 

Probably the best movement to come out of Smiths Anglo Celtic Factory at Ystradgynlais (the quality stuff being built at Cheltenham), quite sophisticated in design & general build quality, unfortunately let down by a lack of jewels, but in their defence they were trying to produce an Everyman watch at a reasonable price.

  • Like 4
Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • They are for balance wheels only and wheels with similar pivots (B = bombé). You can use flat jewels for balance wheels (not recommended)  but no bombé jewels for ordinary wheels.
    • Not SS but very slight wear on the underside edges have a little brass showing under magnification. New crystal arrived £3 with tax. Nice champaign dial color.
    • I also just realized I had that tech bulletin saved...but in French for some reason 🙂 No, I don't speak French. 2172_Bulova 11AOAC 11AOACD 11AOACB.pdf While parts are drying I'm on the hunt for a replacement crystal. I can measure the opening and get a generic one, but it'd be nice to find out what the original looked like first. Of course, case code 3093 does not appear in any of my reference materials. JulesBorel lists a C3093 case code, and shows Bulova part # 1222-5. Does anyone have information on this guy? I found a thread here talking about how the -5 is the height of the crystal, but that's as far as I've gotten. I also found one site that claims to have it in stock, but before I risk my $20 I'd like to confirm it's the right part.  
    • Thanks for the replies. I did the job today and found that the oversized stem fitted just perfectly into the worn mainplate without any adjustment. Original stem diameter was 1.24mm and the oversized was 1.40mm. I did have to make an adjustment to the setting lever though. The small pip that engages with the groove in the stem hub was slightly to wide. I made that a bit smaller with a fine file. Don't ask me why that was too big, it just was. All working very well now. No wobble and not pulling out. New crown fitted as good measure.
×
×
  • Create New...