Jump to content

Eta 1568 Trouble

jimbob

By jimbob
in Watch Repairs Help & Advice

 Share

Recommended Posts

jimbob Member

jimbob

Posted
Posted

All was going great when I diagnosed that the canon pinion was in need of tightening.  I dismantled very carefully and thought I would give it a service.  Whilst rebuilding, again very methodically and carefully, the darned pinion on the 4th wheel just flipped!  To try and console myself I imagined this was due to the age and wear/tear, still mightily frustrating.  It still works well and keeps good time but alas no seconds hand fitted.  It's an ABERCROMBIE AND FITCH (ALSTATER) fitted with a Schild 1568 movement.  Can anyone tell me where I can get a replacement 4th wheel, pretty please?  Agreat forum with some very educated contributors nice to join and read you all.  Thanks!

post-1559-0-42425900-1447698330_thumb.jp

post-1559-0-18556300-1447698340_thumb.jp

post-1559-0-88206300-1447698350_thumb.jp

Link to comment
Share on other sites
clockboy Distinguished Member

clockboy

Posted
Posted

Clockboy! I got one from Germany arrived today, 2 minutes later boomboom!  up and working great.  Thank you for your time and effort, very comforting in my hour of despair.

Nice Jim, worth the wait I am sure. All part of the vintage watch repair enjoyment !!!!!!!

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Setting lever spring

      By Neverenoughwatches · Posted

      As an experiment i was thinking of not hardening it to see how it fairs. Now that i have a complete template i could knock up another in half the time if this loses its elasticity. I might play about with a few pieces today to test their bending and spring properties. This was cs 100 the supplier quoted in annealed state, it was nice to work with files so I'm taking it thats its state. What you are looking seems like it would need annealing to work it. This is why i went for this stuff that cuts out that process, it was so easy to work.
    • dnhb
      Is this a 'hack' ?

      By dnhb · Posted

      Showing state of hairspring on receipt, backplate & 'dished' wheel.  Thanks, Nev. Amplitude v. weak - balance wheel turns over arc of only ~20deg. Don't know how to calculate movement rate or safely vibrate balance spring! Meantime I have reduced the 'dishing' & clock no longer runs for more than a few minutes except face down which supports my theory that it was 'dished' as a hack to avoid doing a proper repair.
    • mikepilk
      Setting lever spring

      By mikepilk · Posted

      I would harden and temper (to a light blue). It's so easy to do and only takes a couple of minutes. A search on ebay UK for "spring steel strip cs" finds plenty available in small quantites and thicknesses from 0.1mm up.  But the question is ( @nickelsilver) which "CS" number is best for watch parts ?  Also, from one of the ads : "CARBON SPRING STEEL. SIZE IS METRIC 15.00mm X 0.10mm X 304 MM  CS100 FINISH BRIGHT . HARDENED AND TEMPERD TO 480-530VPN" I've no idea about 480-530VPN. Does that mean it needs annealing before working?       Have you seen this video, he shows how to determine where the indents go ?  
    • Waggy
      Movement holder made with 3D printer

      By Waggy · Posted

      Here is the insert ring for rectangular or elliptical movements: Note that the length is the side with the stem cut out on the spreadsheet (in the picture below this is 15.15: Here is the fake pdf file, again you need to convert to .zip after download to access the FreeCAD and 3mf files. Rectangular insert disc.pdf    
    • JohnR725
      Omega cal. 565 - low amplitude

      By JohnR725 · Posted

      as you took the mainspring out what did it look like? It's amazing how much amplitude you can get if the mainspring actually has the proper shape. last week I was doing a 12 size Hamilton and was very much surprised with the beautiful back curvature the mainspring had. Then the watch had a really nice amplitude the group would be so proud it was 350 until I dropped the lift angle down to 38 that drop the amplitude quite a bit below 300. then with the beautiful back curve it still had really nice amplitude the next day. I really wish all my mainspring's look like this as the watch had beautiful amplitude the next day. So many of the aftermarket pocketwatch Springs I see now do not have anything resembling a back curve may be a slight curve and that's about all. They still work but they just don't work as nice as a properly made spring. then Omega as all sorts of nifty technical documentation unfortunately every single corner is watermarked with where it came from who downloaded it etc. very paranoid company. On the other hand I will snip out images like from the document on recycling a mainspring barrel. for instance here's the section on what your mainspring should look like. water damaged a lot of times means rust was there rust on this watch?
×
×
  • Create New...