Jump to content

Screwdrivers Choices


Recommended Posts

But you are all missing the point. The final mark of quality is that the blades should be dressed with the Horotec or Bergeon twin roller sharpener that produces parallel faces at the blade end. $$$$$

It does make a lovely job Colin, but not required unless you just have to have hollow ground blades.

  • Like 1
Link to comment
Share on other sites

As others have said, it's the quality of the blades that's the most important factor.

 

However, I decided to treat myself to a recent birthday present with a set of VOH screwdrivers, they are an absolute pleasure to use (and have a nicer feel than any Bergeon, Horotec or AF that I've used).

 

post-1141-0-93290200-1446762517_thumb.jp

 

But I also use various other screwdrivers where one of the VOHs isn't suitable, these are mostly tailored and dressed for individual tasks, here are about half of them  :biggrin:

 

And also as others have said, shaping and finishing the blades is critical to maintaining good tools and reducing the risk of damage to scres and other delicate bits. 

 

post-1141-0-25424600-1446762709_thumb.jp

Edited by JimInOz
  • Like 2
Link to comment
Share on other sites

  • 2 weeks later...

I suppose this is a "sentimental" 2.5 mm screwdriver issue, otherwise I would get a different brand, readily available from your preferred -- read expensive -- brands, whichever one you choose. The nice thing about screwdrivers is that there are tips available separately so maybe, just maybe a VOH for say, 2.0mm tips, with a little elbow grease may "host" a 2.5mm tip...of course the color code will be screwed up...pardon the pun.  :)

 

In any case, I hope you find what you are looking for.

 

Cheers,

 

Bob

Link to comment
Share on other sites

They are as good as Bergeon and the tips fit each other. Some people are partial to them rather than Bergeon. Also they offer different models just like most everybody else. Honestly, I made my set a little bit of everyone so I could compare and am using mostly the cheaper Bergeon one (about $100 set of 9). All that said, it is mostly out of habit rather than because of niceties. The rubber covered ones are probably better to my taste but somehow they still get second choice. Go figure! In the end it just a matter of habit and individual preferences...at that level of quality.

 

Hope it helps your decision,

 

Cheers,

 

Bob

Link to comment
Share on other sites

I'd hold out for a VOH and only get a cheapy if you really need a 250.

 

I think it would make you grit your teeth every time you saw the **BLEEP** child among your VOH beauties.

 

I know it would me.

 

Best of luck with your hunt.

 

Cheers

 

Jim

 

post-1141-0-21308000-1447717269_thumb.jp

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • My email address is in my profile, feel free all to drop me a quick hello. 
    • I have an Enfield mantel clock with a broken mounting lug (see photos). Does anyone have any suggestions about the best way to proceed?
    • Thanks VWatchie! I did spot your walkthrough thank you. And you are spot on about the movements too!   Nick
    • Yup watchie you are entirely on my wavelength with this , you actually said what i was hinting at, what if something happens to mark ? Will someone be able to take over ? Its not that long ago that the forum was down and Mark had to step in and fix it. And you are right a wealth of information that does not exist as a whole anywhere on the planet will be lost. Can that be archived elsewhere? It would be an absolute shame if the plug was pulled without warning, i would like to think Mark wouldn't do that to us. And like i said in my first post i talk about things other folk might be affraid to.  So lets not skirt around anything. It might be nice to have a place where we can all drop our emails just in case so we always have that contact. Can you make that happen  Old Hippy ?  i kind of think of you as the pops of the forum 🙂
    • Hopefully if the issue is running costs, Mark would let us know and suggest ways of raising finance. If it's the other issue, which we are skirting around, sites can be passed onto others.   PS because I know you're all interested, I  had a bacon and mushroom sandwich for breakfast.  Hehe. 
×
×
  • Create New...