Jump to content

Wyler Incaflex Navigator - Front or Rear Load

Recommended Posts

Hi All

This is a new one for me.  Wyler Incaflex Navigator watch - I managed to get the case back off after a bit of treatment and scratching (literally) around, only to be confronted with a secondary case cover. Now I am unaware of the next step. The secondary cover is brass as opposed to the stainless primary cover.

Can someone tell me whether this is a front load or is the cover supposed to pop off too.  Other refurb videos I have seen - this secondary cover is a loose fit.  There is corrosion/gunk around the seal so I am treating that too - but I don't want to force it.


Any help would be appreciated - Pics below:




On 4/24/2023 at 6:55 PM, LittleWatchShop said:


Crisis averted!  I managed to find a video from 2014 on YouTube which had a similar watch.  The (plastic) bezel pops off and the movement came out the front!  and... tada... it started running! Unbelievable.  The movement looks good too.  I do need a crown, which has a pocket watch style crown  which goes into a slot on the stem.  The crown is missing - so that's the next challenge!

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...