Jump to content

Suspension spring


Willow

Recommended Posts

I have a W&H Sch small wall clock the problem is the suspension spring

it is bent and twisted i have tried to straighten it and the clock does work but stops after a while,

do you think you could change the spring, and if so what would be the best way to remove the pins given how small they are.

20230317_124428 (1).jpg

Link to comment
Share on other sites

15 minutes ago, oldhippy said:

You can buy Suspension Spring Steel. I have posted the link below. You can knock the old rivets out, punch in new holes in the spring steel that way you can use the original brass fittings. The old spring certainly need replacing. 

https://www.cousinsuk.com/product/suspension-spring-steel

Yes did see that, but the one at cousins is 6.00mm x 0.15mm thickness mine is 3.00mm x 0.05mm

Link to comment
Share on other sites

47 minutes ago, oldhippy said:

Not heard of them, don't no what i would do without you and watchweasol, just like to say thank you both, for the time you put in to the forum it is greatfully appreciated.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...