Jump to content

Starting A New Tradition In American Watchmaking...

DJW
 Share

Recommended Posts

DJW Super WRT Addict

DJW

Posted
Posted

I hope this doesn't come off as a sales pitch for RGM Watches, but I find myself very proud of the fact that the USA, once again, has a legitimate Company making high grade watches. Since the doors closed on the Hamilton Factory in 1969 (the year I was born), there has not been a single company that has produced an in-house movement here is the United States.

 

I believe that, to us as American Watch Addicts, we have a special attachment to this company. And, I'm sure the UK Watch Addicts have the same feelings about watchmakers like R.W. Smith, who incidentally, I believe will go down as one of the Greatest watchmakers of all time! 

 

I just wanted to share a couple of short videos that give the story behind RGM's momentous achievement of producing a great timepiece, the Pennsylvania Tourbillon.  

 

Part 1

http://www.youtube.com/watch?v=4PrBLgjO0gU

 

Part 2

http://www.youtube.com/watch?v=QxrrHKTyxts

 

 

Regards,

Don

 

Link to comment
Share on other sites
autowind Distinguished Member

autowind

Posted
Posted

The American watch industry as was, had a past to be proud of, think of all the great names, Elgin,Waltham,Hamilton,Bulova, just for starters, I'm sure this new company will carry on the tradition. The only problem, being a poor person, will be the price, but then it's not aimed at my sector of the market. I hope they succeed.

Link to comment
Share on other sites
DJW Super WRT Addict

DJW

Posted
  • Author
Posted

Yes, their prices are why I don't have one today. If I'm not mistaken, there least exspensive watch is around $2000, their tourbillon is $95K!

 

I do lover their in house movement, the 801 caliber. it is probably one of the most beautiful  movements being produced today...

 

RGM_MODEL_801P_B.jpg

Link to comment
Share on other sites
Mark Distinguished Member

Mark

Posted
Posted

Yes, their prices are why I don't have one today. If I'm not mistaken, there least exspensive watch is around $2000, their tourbillon is $95K!

 

I do lover their in house movement, the 801 caliber. it is probably one of the most beautiful  movements being produced today...

 

RGM_MODEL_801P_B.jpg

 

That is very nice! And yes - it would be a crime to hide it away in a case without a display back.

Link to comment
Share on other sites
DJW Super WRT Addict

DJW

Posted
  • Author
Posted

Also, I doubt these guys were the first to do it, but this is where I got the idea of using the Hamilton 10s movements for wristwatch conversions. They also produce some extraordinary engine turned dials as well.

Link to comment
Share on other sites
ianmedium WRT Addict

ianmedium

Posted
Posted

I really admire RGM for doing this. I think with them and Roger Smith in the UK two of the most famous horological centres  are coming alive again and that can only be a good thing. Along with Seiko in Japan it is great to have other places of quality other that Switzerland.

Link to comment
Share on other sites
DJW Super WRT Addict

DJW

Posted
  • Author
Posted

I would wager that they are heat treated as is customary in this level of finish...but I don't know for sure!

 

As far as color, it can be controlled if you have precise control of the heat levels. If you've every blued a piece of metal, you can watch it go through multiple colors and in that, varying degrees of blue.

 

As far as imperfections go, if the piece is perfectly polished and cleaned, you can get an amazing Blue finish with really no visible flaws. But, it is NOT easy! Believe me as I've spent the better part of a day re bluing a set of screws for an antique pocket watch. 

 

Speaking of Blued screws, that is the one thing about this movement that I really don't care for. Traditionally, blued screws were usually done on lower grade finishes and typically paired with guilded  movements. Polished screws were usually used with nickel finished or "white" movements...

 

Don

  • Like 1
Link to comment
Share on other sites
DJW Super WRT Addict

DJW

Posted
  • Author
Posted

 

Speaking of Blued screws, that is the one thing about this movement that I really don't care for. Traditionally, blued screws were usually done on lower grade finishes and typically paired with guilded  movements. Polished screws were usually used with nickel finished or "white" movements...

 

Don

 

The Blued Screws look "Right" with this finish!

 

post-90-0-71406000-1395323589_thumb.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      Unfortunately I'm not that lucky. I started on the train side and after I noticed the binding I pulled everything out except the driving wheel to rule everything else out. It still binds. I'm going to double check that the pinion is fully seated on the staff first, then if no joy I'll push the bridge jewel up a fraction of a mm. Fingers crossed!
    • Waggy
      Rado rotor removal

      By Waggy · Posted

      Happy to have helped, great way to start the day with a win! 🥳
    • doober
      Rado rotor removal

      By doober · Posted

      Thank you for the advise!! It worked. The setting screw was a lock/unlock to remove the rotor. 
    • GuyMontag
      1972 Bulova President "E" Sea King 11ACACB movement

      By GuyMontag · Posted

      I have that French tech sheet too, it is a little different than the English one (eg, it doesn't have the auto works diagram). BTW, it looks like you are looking up the case number in the 1979 ABC supplement. The 1974 ABC catalog does have the 3093 case. As you determined it takes the 1222-5 crystal.  When I serviced my President 'A' (which also takes that crystal), I was able to fit a 29.8 crystal from my DPA crystal assortment. Those are, in my opinion, a great deal. The assortment comes with 10 sizes each from 27.8mm to 32.4mm in 0.2 increments. I pretty much use them for any non-armored crystal that takes a high dome crystal. I think they no longer make them but Cousins has still has some in stock but when I bought them they were around $40 for the set and now they are around $100. Still, at 40 cents a crystal it's still a good deal. For the large driving wheel, I remember I once assembled the keyless/motion works first and when I placed the large driving wheel it was interfering with the setting wheel on the dial side as the teeth were not fully meshing and it wouldn't fully seat. If that isn't the issue I got nothing and am looking forward to see how you solve it 🙂
    • Waggy
      Rado rotor removal

      By Waggy · Posted

      Not sure, but just looking at it, it seems like the screw on the right may be a fake? The one on the left may not be a screw in the regular sense at all, rather a 2 position device, I think you need to point the slot towards either of the 2 dots and one will secure and one will open. Like I said this is just my best guess looking at the pictures.
×
×
  • Create New...