Jump to content

Recommended Posts

somewhere else on the group I know there were discussing the punches and there appears to be some size variations. In other words there is not a necessarily a universal size that fits all at least that was a thought was in this discussion. then here's a link to cousins they sell individual punches

https://www.cousinsuk.com/search?searchTerm=Staking Set Individual Punches

 

  • Thanks 1
Link to comment
Share on other sites

10 hours ago, TwistyHairspring said:

I have a basic staking set. Does anyone know of a good source of individual punches?...other then eBay?

There is a big NAWCC event in Mesquite this weekend.  I was planning to go and that was one of the items on my list to look for.  Looks like I am gonna skip the trip because it is a 4hr drive, and I have so many other things going on right now.  Hate it...but gotta keep priorities straight.  Only 3.5hr drive for you.

14 minutes ago, TwistyHairspring said:

there is a 100# minimum order.

I don't see that.  The last time I ordered, I did not see this minimum requirement.

  • Haha 1
Link to comment
Share on other sites

21 minutes ago, TwistyHairspring said:

It is a K&D set, so the diameter of the punches is common (4.7mm).

Cousins UK looks like a great resource, but there is a 100# minimum order.

Anyone have a spare triangular punch on hand?

There's no minimum order from Cousins -you can buy a single item if you want.

As an aside - I've asked this before but didn't get an answer:

Does anyone know ( you must @JohnR725 ! ) what this thing does, with a plastic cap one end, and flat brass at the other?

20230301_160258.thumb.jpg.2ea0ac146d4a9719cfc60db77b402449.jpg

Edited by mikepilk
Link to comment
Share on other sites

27 minutes ago, mikepilk said:

There's no minimum order from Cousins -you can buy a single item if you want.

As an aside - I've asked this before but didn't get an answer:

Does anyone know ( you must @JohnR725 ! ) what this thing does, with a plastic cap one end, and flat brass at the other?

20230301_160258.thumb.jpg.2ea0ac146d4a9719cfc60db77b402449.jpg

What is the diameter?  It looks like a lathe tailstock runner which would have a diameter of about 7.6mm

Link to comment
Share on other sites

21 minutes ago, LittleWatchShop said:

What is the diameter?  It looks like a lathe tailstock runner which would have a diameter of about 7.6mm

It's the same diameter as all the other stakes in my Boley and Leinen set - about 4.67mm

Link to comment
Share on other sites

2 hours ago, mikepilk said:

Does anyone know ( you must @JohnR725 ! ) what this thing does, with a plastic cap one end, and flat brass at the other?

the problem with staking his sets are they often come with mystery items. I've seen that before I think we might have one at work I'll have to check. Don't have one in my set and I'll have to see if there is one at work to look at it. I know when I get together from time to time with a group of watchmakers we bite have a discussion on mystery tools and mystery tools can include things found in the staking septic nobody seems to know what they're used for.

For instance if you look in the catalog found at the link below I don't recall seeing it. which just means for looking at the wrong Of

https://archive.org/details/KDStakingTools/mode/2up

 

Link to comment
Share on other sites

4 hours ago, LittleWatchShop said:

There is a big NAWCC event in Mesquite this weekend.  I was planning to go and that was one of the items on my list to look for.  Looks like I am gonna skip the trip because it is a 4hr drive, and I have so many other things going on right now.  Hate it...but gotta keep priorities straight.  Only 3.5hr drive for you.

eBay has cut into the regionals and declining membership. But at least in the past I found the regional meetings the best place to buy stuff tools watches whatever. then if you took your time to search through all the bins and boxes of each of the Sellers is amazing what she would might feel the dig up.. Because as I said before eBay this is where lives sell their stuff and the miscellaneous tools they might be selling at a dollar a tool or something but today with eBay who knows. If you've never been to regional well worth going at least one time.

https://net.nawcc.org/NAWCC/Events/Event_Display.aspx?EventKey=MT23LSR

 

 

Link to comment
Share on other sites

9 hours ago, LittleWatchShop said:

I inherited this little staking set and am still clueless as to how it is to be used.

2023-03-01 12_44_35-20230301_115641.jpg ‎- Photos.png

2023-03-01 12_44_20-20230301_115658.jpg ‎- Photos.png

The pocket watch case dent remover? Or is that a holder for the stakes? I assume that set was from a time before stake holders were invented?

Edited by JohnFrum
Link to comment
Share on other sites

14 hours ago, LittleWatchShop said:

I inherited this little staking set and am still clueless as to how it is to be used.

I don't suppose there's any indication of who made it stamped anywhere on the base or the punches themselves? Then an interesting assortment you have including three punches for insane people who like to work on cylinder watches. You don't always find those and you definitely don't find those in modern sinking sets as modern watchmakers have come to their sanity and don't work on cylinder watches.

I know I've seen the set before although the discussion below probably wasn't where I saw it interesting to get a catalog page don't know if we get an answer of what is for?

 

 

Edited by JohnR725
Link to comment
Share on other sites

15 hours ago, LittleWatchShop said:

I inherited this little staking set and am still clueless as to how it is to be used.

Like the usual ones, just your hand is the vertical guiding tool.

They were cheaper for those who could not afford the big one. Here the stakes are usually 4.0 mm.

Frank

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • although not in this case.  It was the Lugano Convention and its deficiencies that allowed a Swiss court decision in the first place.  This isnt really a Brexit issue at all.  A decision that affects both the EU and the UK should never have been heard in Switzerland.
    • Hi guys I think that old hippy is correct, it opens the gates for china to manufacture aftermarket spare parts. considering that they already do work on behalf of the Swiss I guess this decision gives the a little more legitimacy to tool up and I am sure they will take advantage of the situation either with or without the blessing of the Swiss watch industry  Having read about the protectionist machinations of the Swiss in the history of Europe they were the only ones to get fat at everybody else’s expense. I think the outcome could have been guessed at but ,  fair play to Cousins UK for standing up to them.  Now the question,  will everybody boycott Swiss watches and Swatch, no way they will still fill their coffers.  Me I stick with the Japanese once renowned for cheap shitty watches who came good through industrial effort and don’t for get the Russians that most dismiss as low grade crap. Wouldn’t buy a swatch product ever how about you all.? a
    • Hold the crown when in winding position, move the click away from the crown wheel, and then while holding the crown let it slowly unwind. I recollect that you must remove the automatic device bridge first, but maybe I'm wrong. You can first try without removing the automatic device bridge.
    • nevenbekriev- You nailed it with your description of me and my reaction when the clock started ticking again. I am a newbie.  I love the sound and idea of mechanical clocks but the idea of owning one and trying to keep them running has never appealed to me. My wife bought this one and an antique German wall clock.  When I looked into having someone repair them for me, the universal response was "it's really expensive to work on them, you should just replace the movement". So, I had nothing to lose, I started researching them and opened them up. The wife is happy because she hears the sound of the clocks again. But I have gone down the "accuracy" rabbit hole. In the vertical position, the balance wheel was not floating. It was sitting on the bottom of the frame. I adjusted the lower spring collet and got it floating. It easily passed the 270 degree 3 to 5 minute oscillation test. It took 8 minutes for the wheel to completely stop moving.  I put it the unit back in the movement and checked the safety pin. It does not touch the safety roller anywhere in +/-270 degrees rotation from neutral position. But the amplitude of the rotation with the spring fully wound is weak based on what you are saying. It rotates +/-90 degrees from the neutral position.  No, I did not take the movement completely apart.  That seemed way outside my skill set at the time. There is a reason I became an electrical engineer and not a mechanical engineer. I am much more comfortable with moving electrons than tiny moving metal parts. Will I do it in the long run? Anything can happen. I don't seem to be able to let it go.
×
×
  • Create New...