Jump to content

Back with a vintage tool acquisition

Neverenoughwatches
 Share

Recommended Posts

Neverenoughwatches Distinguished Member

Neverenoughwatches

Posted
Posted

Hello all you watchmaking peeps, i trust you are happy and in good health.  Well I'm back, missed me ? Please don't all sigh at once. Work commitments has kept me busy and my watch repair interest had to take a temporary back seat. But its now time to return to it with a vengeance. Starting with my latest acquisition of vintage tools. Nothing spectacular but some food for thought for beginners on a budget and maybe some interest and a question or two for the more advanced and pros if they would indulge me. So lets start with a source and a figure of cost. My favourite buying site Ebay, this can be a waiting game for the right tool at the right price. Which can payoff if you are like me, I'm never in a rush to buy anything in particular. But always keep an eye out for something i like and might use for when my skill set improves. I never get into a bidding war, i decide what i want to pay long before the auction ends and submit that figure around 6 seconds before the auction ends ( known as sniping, unethical ? As has been discussed before, you have to play the game same as everone else). These are actually two ebay purchases, one at 6 quid and one at 14 quid so including postage came to around 24 as they were the same seller and he combined the postage for me. The majority of the two buys are cutting broaches and files. A lot of large sized broaches probably for clocks and some smaller ones for watches. Some nice part making files, names include stubbs, favourite and one the oldtimers may know Gantoine Glardon. A graver and a few homemade gravers from square files handles i think . Something of particular interest to me is a pivot burnisher with the name David Borlo A. Vallorbe. Also in the bundle is a solid ss one piece case knive, love this as it has a cracking Marvin logo on it. An unusual staking block with v slots at each end. Three agate oil cups that i am keen to replace the plastic ones i have been using, since reading some discussion regarding some plastic components can leach into the oils placed in them. And lastly the quiz tool that has 3 accessories slid onto the handle shaft. Happy reading and any input would be welcomed and appreciated thank you.

20230203_173825.jpg

20230203_173841.jpg

20230203_173851.jpg

20230203_173903.jpg

20230203_173944.jpg

20230203_173949.jpg

20230203_174000.jpg

20230203_174006.jpg

  • Like 5
Link to comment
Share on other sites
Neverenoughwatches Distinguished Member

Neverenoughwatches

Posted
  • Author
Posted
On 2/4/2023 at 1:47 AM, rehajm said:

I really like those wooden oil pots!

The agate is stable for the oils compared to some plastics that can be hit and miss. Sometimes they crop up in tool job lots.

On 2/3/2023 at 8:50 PM, watchweasol said:

Hi NEW.  A nice little hand full there for the right price,  well done

Thanks WW I need to get my finger out and find out what the mysery tool is for.

Link to comment
Share on other sites
JohnR725 Distinguished Member

JohnR725

Posted
Posted
On 2/3/2023 at 12:05 PM, Neverenoughwatches said:

And lastly the quiz tool that has 3 accessories slid onto the handle shaft

What you mean by Mystery tool it looks like something that's in my bench at work.

 

On 2/3/2023 at 5:47 PM, rehajm said:

I really like those wooden oil pots!

Those personally are my favorite kind either with the agates if you can find them or glass. I like that might well cup next to whatever I'm wailing and then set it back when I'm through.

Looking at the picture I know who stole all my little reamers from work they got sold in another country on eBay. Yes I work at a very peculiar place where personal tools are not very personal. The other day looking for a small reamer apparently I have no small reamers left anymore they've been spirited away to parts unknown.

It would help on the mystery tool if you unscrew the end piece so everyone can see the holes in the end and then show the end of the tool. I suppose was really nice and find a vintage catalog and find your picture of the thing but do I really want to be that nice? Of course I find the Log of vintage tools. Okay I found the link to the tool catalog a little light reading.

I've attached an image the mystery is gone how sad. So you can use that the finished the other end of the screw providing you have enough tips to fit the right size which typically I don't.

 

https://archive.org/details/20thcenturycatal00purd/mode/2up

 

 

 

mystery tool for finishing the ends of screws.JPG

Link to comment
Share on other sites
Neverenoughwatches Distinguished Member

Neverenoughwatches

Posted
  • Author
Posted
21 minutes ago, JohnR725 said:

What you mean by Mystery tool it looks like something that's in my bench at work

Haha. Maybe not to you John but it is to me at the moment. Are you going to make me work for the answer ? 🙂. I'm  not affraid of hard work John, set me a time limit and I'll try to beat it.

1 minute ago, Neverenoughwatches said:

Haha. Maybe not to you John but it is to me at the moment. Are you going to make me work for the answer ? 🙂. I'm  not affraid of hard work John, set me a time limit and I'll try to beat it.

Bugger i didnt read the rest i thought that was regarding the oilpots. Thanks John 👍, i was looking forward to the challenge next time maybe .

37 minutes ago, JohnR725 said:

Looking at the picture I know who stole all my little reamers from work they got sold in another country on eBay. Yes I work at a very peculiar place where personal tools are not very personal. The other day looking for a small reamer apparently I have no small reamers left anymore they've been spirited away to parts unknown.

Haha you do make me laugh John. Post me your address and i will send you some 🙂,  i have lots now.

1 hour ago, JohnR725 said:

I've attached an image the mystery is gone how sad. So you can use that the finished the other end of the screw providing you have enough tips to fit the right size which typically I don't.

So typically to dress, shape, shorten the tip of a screw. I now owe you a few beers/coffees John .

Link to comment
Share on other sites
valleyguy Watch Enthusiast

valleyguy

Posted
Posted (edited)

You got a couple of nice buys with good names that produce quality tools, i like you keep an eye on ebay hoping to pick up a quality tool to build up my small collection, the ones i've bid on seem to sell for silly money on auction, or other used tools are listed with buy it now price at more than you can buy them new, i don't know if the high prices are just a UK thing.

Edited by valleyguy
Link to comment
Share on other sites
Neverenoughwatches Distinguished Member

Neverenoughwatches

Posted
  • Author
Posted
39 minutes ago, valleyguy said:

You got a couple of nice buys with good names that produce quality tools, i like you keep an eye on ebay hoping to pick up a quality tool to build up my small collection, the ones i've bid on seem to sell for silly money on auction, or other used tools are listed with buy it now price at more than you can buy them new, i don't know if the high prices are just a UK thing.

Ah- ha VG, i see i have ebay competition in you my friend 😉. Most of my tools are covered now for the time being, its mostly really nice and or really expensive vintage tools that get my juices flowing. Give me your list of what you are after and i will let you know if i spot something you might be interested in. 

Link to comment
Share on other sites
JohnR725 Distinguished Member

JohnR725

Posted
Posted
49 minutes ago, Neverenoughwatches said:

Not sure if the brass piece is part of the tool,

The mystery brass part is not on the catalog page. It's also not included with my tool but it might still have some unknown purpose maybe it's used to hold the tool somehow for some reason that I can't think of.

 

Link to comment
Share on other sites
Neverenoughwatches Distinguished Member

Neverenoughwatches

Posted
  • Author
Posted
1 hour ago, JohnR725 said:

The mystery brass part is not on the catalog page. It's also not included with my tool but it might still have some unknown purpose maybe it's used to hold the tool somehow for some reason that I can't think of.

 

Maybe used to fix the tool into watchmakers vice ? Possibly home made, and brass to lessen wear on the shaft .

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • rossjackson01
      Intro

      By rossjackson01 · Posted

      Welcome my friend. 
    • rossjackson01
      Help please.

      By rossjackson01 · Posted

      Been there. Worn that Tshirt.  'ping'. Hands and knees. Nothing. Nada. 20 minutes? Ha! I found it 7 month later. How? Well, after advice from a member, I invested in a £4 UV light torch.  Hands and knees looking for a 'ping' from a Sekonda, found them both within 30 seconds. UV makes the jewel shine. easy peasy. Could have taken longer. Just lucky on the location of the search. Hope this helps.
    • Rixy
      Broken lug

      By Rixy · Posted

      Thanks Dell. I thought about silver soldering. Have never done it but would like to give it a go. Do you think to put flux on the butted joint then run the solder in or to maybe brace it with a piece of scrap spring steel?
    • rossjackson01
      Without Our Forum

      By rossjackson01 · Posted

      Never and others. Yes, like you I do spend a fair amount of time reading the contents of this forum. I find it better that any other. Clear, lucid, no Prima Donas, and most of all an easy access without adverts. All thanks to Mark. God bless you mate. You give so much to many of us. What if? No Mark? Hypothetically. A forum. I did run a forum for a few years. Really enjoyed it, but became so engrossed that it did affect my health. I gave to to others to run. Not been back. It was very successful and rivalled a number of large paying sites. No adverts, no others but me. I did ask and listen to members comments and it worked well.    Costs Having a domain name, £10 annually.  Register the site with a forum company, free. Build the site using the forum company guide lines, free. It looked and ran almost the same a Mark's. All the same facilities. The cost was only £5 per month, but counted visits (views). If I recall, it was that price for 5,000 views. Each extra 5,000 views increased the price by £2 per month. Success was my own personal undoing. From £5 per month initially, it rose to £60 a month and looked like increasing. This was 10 years ago. I could not afford that, and asked it anyone would like to take over and someone did. I would assume that this is the price that Mark is funding for us all. His return is our continued comments on the internet about his course, and the fact that many of the big names on YouTube mention him as their Tutor. Those of us who have done, and are still using, his course, benefit. In comparison to other courses, I can't believe how cheap it is, and the value is exceptional. It is the structure that gives the value. Long may Mark reign. Ross  
    • TheQuietMan
      Help please.

      By TheQuietMan · Posted

      Hi all, total newbie to watchmaking and I've had a bit of a mishap. Just completing level 2 and was doing ok, but I was just on the last part of the reassembly of my ST3620 when the balance end stone shot across the room, just as I was trying to see if I had put the correct amount of oil between it and the balance end, aarrrgh! Been on my hands and knees combing the carpet for 20mins looking for it but to no avail. Does anybody know where I can get a replacement from and what to look for please?? Thanks.
×
×
  • Create New...