Jump to content

New Member And Watch Bands


Hamish

Recommended Posts

Hi folks,

 

New member from Australia. I have been following your forum for a couple of weeks and have really picked up some good tips. I really had a life long interest in watches, but started getting into repairs around 6 years ago. Before that I was the guy who was on the couch Christmas day fixing all the broken toys as I guess some of you were as well. I became a fan of Marks videos and really learnt a lot, like you I find them relaxing as he seems to employ minimum effort in what he does (read skill). Mark, you make a good instructor.

 

I started with pocket watches and have steadily tried to better myself. Like all of you I sure have had my share of frustration...lost parts, breaking things etc, but like anything I guess, if you persist you will get better.

 

What I really like though, is to repair old watches that belonged to fathers/uncles etc and see them being worn again. I have done many over the years. It really appeals to me and most people too, that these fine pieces of machinery are resurrected from the backs of drawers and do their original job again. People ask me what the cost is and I always say no charge as long as you wear it from time to time.

 

Anyway on to the topic of this thread. I have recently (past two years) branched out a bit and started making watch bands. I found the ones on the internet either costly or poor quality. I use exotic skins, maybe a little pricey, but they go a really long way. There are many challenges to get a band right and I would be happy to pass on tips that seem to help me to any members. Crocodile is my favourite, it as tough as anything, but cuts like butter. The set up is straight forward and does not cost much. It takes me around 4 hours per band including the hand stitching. Here is a photo of some examples.

 

post-1190-0-22732500-1436956017_thumb.jp

 

The orange one (yes a bit out there, is ostrich and it has a soft kid backing), the dark ones are crocodile, and the brown is ostrich neck. I experimented a bit and changed the band on a chrome seiko hi-beat to a patchwork (eel, toad, sea snake, ostrich etc) one which my wife likes. Friends have them and wear them regularly and they seem to last well so far.

 

So, glad to be aboard and looking forward to learning more.

  • Like 6
Link to comment
Share on other sites

Thanks for the excellent introduction Hamish, it's always good to get an idea of what others are doing. Your foray into watch straps is indeed excellent. It would be great to see how you go about it. :)

Link to comment
Share on other sites

Hello Hamish and welcome.

You have a talent for making your own watch straps and very good they look. When I started my own shop I stocked Apollo watch straps and I found them to be good. The best seller would be the croc straps followed by pig skin. I assume you buy the buckles. Have you thought of setting up on your own and making it into a full time job. Don't go giving your secrets out.    :D

Link to comment
Share on other sites

Hello Hamish and welcome,

 

You certainly are gifted, they are excellent.

I look forward to your posting describing how you make the bands.  Your hand stitching looks smart as well, you must be a patient type - well suited to watch repair :thumbsu:

Cheers,

 

Vic

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • nevenbekriev- You nailed it with your description of me and my reaction when the clock started ticking again. I am a newbie.  I love the sound and idea of mechanical clocks but the idea of owning one and trying to keep them running has never appealed to me. My wife bought this one and an antique German wall clock.  When I looked into having someone repair them for me, the universal response was "it's really expensive to work on them, you should just replace the movement". So, I had nothing to lose, I started researching them and opened them up. The wife is happy because she hears the sound of the clocks again. But I have gone down the "accuracy" rabbit hole. In the vertical position, the balance wheel was not floating. It was sitting on the bottom of the frame. I adjusted the lower spring collet and got it floating. It easily passed the 270 degree 3 to 5 minute oscillation test. It took 8 minutes for the wheel to completely stop moving.  I put it the unit back in the movement and checked the safety pin. It does not touch the safety roller anywhere in +/-270 degrees rotation from neutral position. But the amplitude of the rotation with the spring fully wound is weak based on what you are saying. It rotates +/-90 degrees from the neutral position.  No, I did not take the movement completely apart.  That seemed way outside my skill set at the time. There is a reason I became an electrical engineer and not a mechanical engineer. I am much more comfortable with moving electrons than tiny moving metal parts. Will I do it in the long run? Anything can happen. I don't seem to be able to let it go.
    • Isn't that the same guy who told Zelenskyy to escalate the war with Russia/Putin when they already had a peace deal? 2 years later and we have half a million young Ukranian boys dead. He doesn't seem very clever...
    • Thanks guys.  quick question. For automatic movement, particularly this one. can I power down the main spring by pushing this rachet down?  i've gotten pretty used to SW210 and powering down a manual movement. But so far i've only been waiting for the auto movement to run out of juice before opening the case.     
    • @Murks the problem you have mate is most watch cases out there to buy are for Seiko NH3X, ETA 2824 and maybe Myota 8XXX movements, oh also the big ETA 6978/9 movements which the dials start around 28.5mm. You might find one on a Google search but I suspect your main chance will be buying cheap quartz ladies watches and hopefully find one of the right size and condition that is acceptable. 😞   Tom
    • The anchor pin should be perpendicular when the anchor is sat on a flat surface and if you post a close up picture of the backplate I will be able to tell you the correct torsion spring , running fast or slow is usually wrong Torsion spring. Here is a video from my YouTube channel showing how I set the beat  
×
×
  • Create New...