Jump to content

Staking set? I don't believe it.


Recommended Posts

I'm getting better. Really enjoying myself. However, as most beginners do, I have started on cheap watches. They are more prone to damage, wear and tear. Many of them have problems with the barrel bridge. The barrel hole for the arbour is worn and too large. On many of them I can insert the tip of the tweezers there is that much movement. I need a Staking set, I think to myself. On my £10 a week spends  that is 3 month saving and not purchase anything in between. Boohoo.

Why not DIY?

I have a hand press for £11. I purchased a set staking punches for £11. Cut holes in a plastic holder. Woohoo! A staking set.  A rubbish one compared to proper standards. But I have to tell you it worked. I closed my first arbour hole and it has worked. Hammer time was gentle.

 

IMG_20230114_151320.jpg

IMG_20230114_151310.jpg

IMG_20230114_151408.jpg

  • Like 7
  • Thanks 1
Link to comment
Share on other sites

5 hours ago, watchweasol said:

Hi Ross full marks for ingenuity and thinking out side the box. A creditable diy solution to your problem. That will suffice untill you get a proper one. Well done.

A proper one? I'm hurt. 

Seriously though. Thank you for the comment. Forgot to mention that I use Rodico under the wood to hold a centre. Does that make it professional. Har har.

Still loving the hobby.

Regards to all

Ross

Link to comment
Share on other sites

A solo ugly aprofessional fixing. To be sure.  😊

Hi Ross  disregard the previous text, fat finger trouble and a duff predictive text on the ipad. What I meant to say It is a professional fix using the rodico. You will probably be able to do lots of jobs on that rig.   I used a 36 hole stake and a set of punches for quite some time and even managed to re staff watches with it, now got a couple of staking tools to do the job.  I you keep an eye out on the bay they do have small sets turn up and you can add to them in the future.  well done.    cheers

  • Thanks 1
Link to comment
Share on other sites

10 hours ago, watchweasol said:

A solo ugly aprofessional fixing. To be sure.  😊

No umbrage taken in in any form. It's not often you are wrong, but you are right again. I have been looking on ebay, and the sets usually start at £100+ but then sell in excess of £300. I can only dream. However, at least I can try my 'DIY 'fix' when I need to. 

I see the YouTube videos of the 'fixers' who always seem to be able to obtain Omega, Rolex watches to attempt their restorations. Galling when the current prices of the 'Mumbai' watches exceeds my pricing strategy. Have you noticed how prices have crept up over the last year?  Even my learning items, Seiko are now out of my league. Ah well.

Thank goodness for my bride who obtained a 1/2 price digital Microscope with a 7" screen for me as a Christmas present. It's brill.

Regards. I am keeping the faith.

Ross

 

 

Edited by rossjackson01
  • Like 2
Link to comment
Share on other sites

Hi Ross sure the prices are on the up, when I started  and got tools from an English company (TG Loader in Oxford)  Bergeron tools were the issue later on there were other cheaper versions , French, Japanese . As more and more hobbyists take it up of course the demand rises and the price accordingly, that’s why some improvisation is needed.  I  rebush clocks by hand  using a vertical drill press not a Bergeron one costing two grand.    All the best 

  • Like 1
Link to comment
Share on other sites

3 hours ago, rossjackson01 said:

I see the YouTube videos of the 'fixers' who always seem to be able to obtain Omega, Rolex watches to attempt their restorations

That's because on YouTube you're the king. I've seen now or know of two separate examples of people on YouTube who the viewing audience sent them a Rolex to restore. So if you want nice watches to work on getting YouTube channel. Don't worry if you think you don't know anything that doesn't stop a lot of people on YouTube just look convincing Sound like you know what you're doing.

3 hours ago, rossjackson01 said:

Even my learning items, Seiko are now out of my league.

Yes Seiko is they used to be cheap but now their collectors items. Even the current Seiko watches are very very popular. But somebody on the group relatively recently picked up something for $50 which seems expensive for Seiko. I think I remember buying Seiko's long time ago for five dollars each that's reasonable price. But the $50 Seiko turned out to be relatively rare and should really go for several hundred dollars. Which made for a really nice learning watch for somebody to break stuff. Oh and of course the much older say goes like this getting parts are nearly impossible. So yes interesting Seiko's are out there but getting them cheap probably more of an accident than anything else.

 

 

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • although not in this case.  It was the Lugano Convention and its deficiencies that allowed a Swiss court decision in the first place.  This isnt really a Brexit issue at all.  A decision that affects both the EU and the UK should never have been heard in Switzerland.
    • Hi guys I think that old hippy is correct, it opens the gates for china to manufacture aftermarket spare parts. considering that they already do work on behalf of the Swiss I guess this decision gives the a little more legitimacy to tool up and I am sure they will take advantage of the situation either with or without the blessing of the Swiss watch industry  Having read about the protectionist machinations of the Swiss in the history of Europe they were the only ones to get fat at everybody else’s expense. I think the outcome could have been guessed at but ,  fair play to Cousins UK for standing up to them.  Now the question,  will everybody boycott Swiss watches and Swatch, no way they will still fill their coffers.  Me I stick with the Japanese once renowned for cheap shitty watches who came good through industrial effort and don’t for get the Russians that most dismiss as low grade crap. Wouldn’t buy a swatch product ever how about you all.? a
    • Hold the crown when in winding position, move the click away from the crown wheel, and then while holding the crown let it slowly unwind. I recollect that you must remove the automatic device bridge first, but maybe I'm wrong. You can first try without removing the automatic device bridge.
    • nevenbekriev- You nailed it with your description of me and my reaction when the clock started ticking again. I am a newbie.  I love the sound and idea of mechanical clocks but the idea of owning one and trying to keep them running has never appealed to me. My wife bought this one and an antique German wall clock.  When I looked into having someone repair them for me, the universal response was "it's really expensive to work on them, you should just replace the movement". So, I had nothing to lose, I started researching them and opened them up. The wife is happy because she hears the sound of the clocks again. But I have gone down the "accuracy" rabbit hole. In the vertical position, the balance wheel was not floating. It was sitting on the bottom of the frame. I adjusted the lower spring collet and got it floating. It easily passed the 270 degree 3 to 5 minute oscillation test. It took 8 minutes for the wheel to completely stop moving.  I put it the unit back in the movement and checked the safety pin. It does not touch the safety roller anywhere in +/-270 degrees rotation from neutral position. But the amplitude of the rotation with the spring fully wound is weak based on what you are saying. It rotates +/-90 degrees from the neutral position.  No, I did not take the movement completely apart.  That seemed way outside my skill set at the time. There is a reason I became an electrical engineer and not a mechanical engineer. I am much more comfortable with moving electrons than tiny moving metal parts. Will I do it in the long run? Anything can happen. I don't seem to be able to let it go.
×
×
  • Create New...