Jump to content

Jacot tool and pivot file burnisher question


Recommended Posts

Looking at the pic just send it back. I purchased a poising tool a couple of years back from fleebay and when it arrived there was distinct crack on one of its cheeks, it other word this tool was U/S.  To be fair to the seller I sent it back & received a full refund. If purchased from eBay there should be a returns policy on the sellers page.

Link to comment
Share on other sites

  • 5 months later...
  • 2 months later...

Hello all, my name is Anthony. I have been collecting timepeices for the better part of 10 years now, and have been studying watchmaking for 3 years now. I have just been the lucky buyer of a Steiner Jacot tool with adjustabke height. I currently own a Steiner Jacot tool, but find I can not find any info on how to properly use this new one with adjustable height. I have been following Marks videos and find them great, Mark thanks for taking all the time to do this, and also all the others who help and contribute. I think this forum is great. Please if anyone has any info that would great. The first of many posts. I can not post pic, because I have not received the too yetl, can I post the website link here to the auction site I won it on?. Many thanks Anthony

  • Like 1
Link to comment
Share on other sites

Welcome to the forum Tony. That's a nice looking tool that you have purchased, and what a good price. I too have a Jacot tool, but again it is not adjustable in height so would not wish to comment on setting it up correctly. Hopefully someone on the forum be able to help you.

I was wondering if it was designed to take a different head (To convert into a set of turns) and that is why there is an adjustment facility to ensure correct alignment. As a matter of interest, how much height adjustment does it have?

Link to comment
Share on other sites

Thanks for the info, and the welcoming, as soon as I receive the tool I will post more pictures, I currently have a regular Steiner jacot tool, but some lanterns where broken when I got it, this was better than buying new pieces for the one I already had. I just thought I would post this to get a head start on learning to use it. From what I have read and it maybe wrong, the attachment is called a"slidding puppet" , and it maybe used for a second pinion? 

Link to comment
Share on other sites

  • 3 months later...

Hi all, purchased this off the bay, looked in reasonable condition (took a punt on it)

 

Assuming there are no chips in the holes, is there anything else i should be looking for or is missing?

 

Thanks in advance

 

279c07.jpg
3ab375.jpg
40ebf2.jpg
1611a7.jpg
Edited by jnash
Link to comment
Share on other sites

  • 9 months later...

All:

I recently grew tired of trying to use the old bow system of powering my Jacot lathe and decided to make my own fixture for powering the tool. I've seen many people do this before, so I thought I'd give it a try. Here's all that it took to complete.

Parts list:

  • Small wooden cutting board
  • Variable speed low RPM electric motor (39 rpm at 6 volts and increases at higher voltage setting)
  • Motor bracket
  • 4 - Rubber feet
  • 1/4" thick aluminum plate (sloted for adjustment to accomodate other tools)
  • 4 - 3/8" diameter bolts, nuts, and washers
  • 4 - 1/8" diameter bolts, nuts, and washers
  • 1" diameter plastic pulley (tension fit to motor shaft)
  • 2mm O-ring 
  • DC  power supply

Here's a video of the thing in use.

Thanks,

Tom

 

pic2.jpg

pic1.jpg

pic3.jpg

pic4.jpg

pic5.jpg

  • Like 4
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Ok thanks Ross, I will give that a try!😁
    • Welcome my friend. 
    • Been there. Worn that Tshirt.  'ping'. Hands and knees. Nothing. Nada. 20 minutes? Ha! I found it 7 month later. How? Well, after advice from a member, I invested in a £4 UV light torch.  Hands and knees looking for a 'ping' from a Sekonda, found them both within 30 seconds. UV makes the jewel shine. easy peasy. Could have taken longer. Just lucky on the location of the search. Hope this helps.
    • Thanks Dell. I thought about silver soldering. Have never done it but would like to give it a go. Do you think to put flux on the butted joint then run the solder in or to maybe brace it with a piece of scrap spring steel?
    • Never and others. Yes, like you I do spend a fair amount of time reading the contents of this forum. I find it better that any other. Clear, lucid, no Prima Donas, and most of all an easy access without adverts. All thanks to Mark. God bless you mate. You give so much to many of us. What if? No Mark? Hypothetically. A forum. I did run a forum for a few years. Really enjoyed it, but became so engrossed that it did affect my health. I gave to to others to run. Not been back. It was very successful and rivalled a number of large paying sites. No adverts, no others but me. I did ask and listen to members comments and it worked well.    Costs Having a domain name, £10 annually.  Register the site with a forum company, free. Build the site using the forum company guide lines, free. It looked and ran almost the same a Mark's. All the same facilities. The cost was only £5 per month, but counted visits (views). If I recall, it was that price for 5,000 views. Each extra 5,000 views increased the price by £2 per month. Success was my own personal undoing. From £5 per month initially, it rose to £60 a month and looked like increasing. This was 10 years ago. I could not afford that, and asked it anyone would like to take over and someone did. I would assume that this is the price that Mark is funding for us all. His return is our continued comments on the internet about his course, and the fact that many of the big names on YouTube mention him as their Tutor. Those of us who have done, and are still using, his course, benefit. In comparison to other courses, I can't believe how cheap it is, and the value is exceptional. It is the structure that gives the value. Long may Mark reign. Ross  
×
×
  • Create New...