Jump to content

Refurbished motor--right in the middle of a watch cleaning!


Recommended Posts

I was cleaning a watch today.  Had already done the clean stage and had started the rinse...bam!  The motor quit.

So, for the next two hours, I was refurbishing this motor.  It had been hacked by earlier watchmakers...found a lousy solder joint that finally said "No more."

I took the opportunity to do a thorough cleaning and rewiring.

Working now.

I have another L&R that has a motor problem...similar motor...so this was a good trial run to fixing it.

2022-11-28 19_12_14-20221128_190731.jpg ‎- Photos.png

  • Like 2
Link to comment
Share on other sites

I sort of feel bad, but sort of not!!!  I purchased an L&R machine from @LittleWatchShopthe other day, which is currently in the hands of UPS.  I get a text from him saying 'The day I ship your machine, my cleaning machine dies!".   I sort of felt bad until he told me later that he got his fixed.  LWS is a man of many talents it seems!

Link to comment
Share on other sites

I just opened up the other non-functioning motor. Other than the fact that the brush mount was broken, the motor works.  Most likely, I can 3D print another mount.  But the wiring must be replaced.  These old motors are very robust, but wiring in the 50s was not durable.  Insulation cracks and crumbles.

  • Like 1
Link to comment
Share on other sites

On 11/29/2022 at 11:29 AM, LittleWatchShop said:

I just opened up the other non-functioning motor. Other than the fact that the brush mount was broken, the motor works.  Most likely, I can 3D print another mount.  But the wiring must be replaced.  These old motors are very robust, but wiring in the 50s was not durable.  Insulation cracks and crumbles.

Progress.  I disassembled the motor, cleaned it, oiled the bearings, and re-wired it.  The housing for one of the brushes was busted, so I 3D printed a threaded cover and a screw that functions very nearly like the original.  I tested the motor and it works.  Now to rebuild the rest of the machine.

2022-11-30 12_59_29-20221130_071257.jpg ‎- Photos.png

2022-11-30 12_58_48-20221130_125305.jpg ‎- Photos.png

Edited by LittleWatchShop
Not->>Now
  • Like 5
Link to comment
Share on other sites

  • 4 weeks later...

I snagged this Hamilton Beach mixer motor off ebay for a good price...for a backup if needed for future cleaner repairs.  It was missing the brushes that are round.  I could not find any, but I did find square ones where the dimension of the side was equal to the diameter I needed, so I bought four sets for cheap.

Then I turned them on the lathe.  I was surprised at how well they turned out.

I do not have the cap screws, but I assembled the motor anyway (had to rewire it) and held the brushes in with rodico.  The motor works.  Now to solve the cap screw issue.

2022-12-27 11_30_05-Window.png

2022-12-27 11_30_19-Window.png

Edited by LittleWatchShop
  • Like 3
Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • people be honest.... Swatch is evil for the watchmakers and repairers, BUT not everything in watches from Switzerland is from the Swatch-Group. As far as i know, Selitta got sacked by Swatch as a Movement-Assembler for them and they started to produce Movements in their own Name with slight Modifications. As far as i know, they sell Parts to the Market for their Movements. In most cases, if a ETA-Movement fails, it is a valid Option to replace it with a Selitta Movement, which i consider the Solution for this Mess with the Swatch-Group...... I have no Connection to anybody at Selitta, but being a Swiss-Guy, i still like to have Swiss-Made Watches, but not from the Swatch-Group.   ok ? regards, Ernst
    • Just one more greedy act by Swatch. They started a number of years ago here in the US..cutting off supplies to watchmakers that could build complications that many Swatch houses couldn't even touch. Old school masters who had gone through some of the most prestigious houses in the world. Otto Frei has some statements on their page about it. I tell all my customers to avoid new Swiss watches like the plague,..unless they just want an older one in their collection that still has some parts out on the market, or they have really deep pockets and don't mind waiting months and paying through the nose to get it back. Plenty of others to choose from..IE Seiko,..or other non-swiss brands Even a number of Chinese brands are catching up with the Swiss,..and I think that in time, their actions will be their downfall
    • Yes. If that's not what you are experiencing...start looking for something rubbing. A 1st guess is that one of the hands is rubbing against the hole in the center of the dial. Especially if you now have lower amplitude in face up/ face down positions.
    • Once a movement has the dial and hands put back and it is recased, would you expect the assembled watch to have the same amplitude as when the movement is in a movement holder and is without hands and dial? Thanks
    • C07641+ not sure what the "+" is for after the last digit.
×
×
  • Create New...