Jump to content

New To Watch Repair

hgilson

By hgilson
in Introduce Yourself Here

 Share

Recommended Posts

hgilson New Member

hgilson

Posted
Posted

Another noob here. 

In my teens (think 1970s), I was fascinated with technology and time travel stories.  Watches and timekeeping was the natural intersection of the two.  From the Omega clock that timed my swim laps to the Bond watches to my Dad's Hamilton (Pulsar?) LED watch to my grandfather's mechanical watches, I was interested in how watches worked and the many ways one could display time.  Once I got to college, my interest took me into a different technology, computers and software.  However, over the years that type of work left me very little time  and tired eyes; not the best combination for learning watch repair.   

About a year ago, I was looking for a gift for some of my team to thank them for their hard work that was completed under trying circumstances.  Work that was complex, intricate and time consuming.  I decided a mechanical watch was a perfect fit.  Researching the gift rekindled my interest in watches and led me to start  collecting watches and attempting to repair them.  I started with just replacing batteries on my old quartz watches.  Moved up to replacing "capacitors" and solving other issues with mecha-quartz (Seiko Kinetics) watches I purchased in the 90's.  Next, I tripped on the Seiko modding community which led me to "build" watches from scratch using parts that I ordered online.  All good fun.  Recently, I started disassembling/assembling some inexpensive seiko movements and am taking Mark L's online course.  So far, except for the stiff back and neck, the brief bouts of crying over the cost of Bergeon tools and spending an evening or two on my hands and knees with a flashlight and a magnet, it has been a blast.

As a noob, I expect I'll have more questions than answers.  Reading the threads has helped me select tools and solve a few of the "problems" that I have already run into.  Thanks for that.  I'm looking forward to being a part of this community.

H.     

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • joelcarvajal
      Gamblin Gamsol for cleaning?

      By joelcarvajal · Posted

      Thank you all for the replies!  Very informative! True enough, the Gamsol took some time to evaporate and does leave a residue. So not all naphtha are created equal!  Need to find alternatives then. i was able to try Hexane recommended by Alex and it seems great.  I wonder what the cons are?
    • GuyMontag
      1972 Bulova President "E" Sea King 11ACACB movement

      By GuyMontag · Posted

      Yeah, I saw that in the tech sheet but I don't see how it can be adequately cleaned with the friction pinion still in place. I've accidentally pulled the arbor right out of the wheel once when I used a presto tool to try and remove it. Mark shows how he does it with the Platax tool. Those are a little too pricey for me so I got one of these from Aliexpress and I just push down on the arbor with the end of my brass tweezers. That usually gets it most of the way out and then I just grab the wheel with one hand the and the friction pinion with the other and gently rotate them until it pops off. Probably not the best way but it's seemed to work for me so far.    
    • Zedster
      Movement inserted from crytal side

      By Zedster · Posted

      Thanks, Jon Sounds like a plan. Obviously I'll have the face on so do you think gripping with the holder will create any problems, but I will check in the morning to see how feasible it is but I assume it only needs to be lightly held. As for holding the movement instead of the holder won't be possible in this scenario as one hand will be puling on the stem while the other pushes the spring down. That was my initial concern is how the hell can I do this with only one pair of hands. All the other times I've had to remove the stem hasn't been a problem, apart from the force required to release the stem from the setting lever, but now I need to fit the face and hands its sent me into panic mode. If it had the screw type release things would be a lot simpler but that's life 😀   Another thing I will need to consider is once the dial and hands are fitted and the movement is sitting in the case I will need to turn it over to put the case screws in. I saw a vid on Wristwatch revival where he lightly fitted the crystal and bezel so he could turn it over, is this the only option or is there another method?      
    • nevenbekriev
      Main spring

      By nevenbekriev · Posted

      Hi Jon, do You think that relation spring torque - amplitude is linear? I would rather guess that the amplitude should be proportional to the square of the torque. I had once idea to check it, but still haven't.
    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      I did not. I thought about it, but I had cleaned it in my ultrasonic, and the tech sheet shows lubricating it in place already assembled, so I figured discretion was the better part of valor. Although since I have to depth the jewels anyway, maybe I pull the pinion off to rule it out 100% as part of the problem. Do you know if there's a safe way to do it? I don't want to use a puller because it would push down on the plane of the wheel, and that seems like a Bad Idea. I thought about using a roller table remover, but I don't think I have a hole stake pointy enough to push it down.
×
×
  • Create New...