Jump to content

Renata balance wheel question


Recommended Posts

Hi,

I'm very very new to all this, still in the sooooo many parts stage! Please be gentle 🙂

I bought a couple of watches to take apart, learn and try to fix, one is labelled Josmar:

josmar1.thumb.jpg.42b7e952fb60e9a45ca314cda871316c.jpg

I liked the style of the face and the 'patina' 🙂

It has a Baumgartner BFG 800 pin lever movement.

josmar2.thumb.jpg.279c1a5293e17e6122300bfbc1934565.jpg

josmar3.JPG.ae1842ac244ccdf6a6d0a12a295eeaed.JPG

https://17jewels.info/movements/b/baumgartner/baumgartner-800/

I guess it was dropped, the upper pivot has broken off the balance shaft, I don't think there's any damage to the jewels fortunately. I found somewhere which sells replacement complete Renata balance wheels as I'm a long way off being able to change a balance shaft!

https://www.cousinsuk.com/PDF/categories/8316_Renata Balance Page 11-15.pdf

The catalogue lists two; 62 and 63 for BFG 800, but what does " a dgt. " and " a pl " mean? I assume they're abbreviations for something?

Many thanks for any help, Andy

Link to comment
Share on other sites

Hi Andy   I have the catalogues but it does not explain the abreviations,.     remember these are swiss publications and therefore  are in their language.     But on the tech sheet there are two balances  complete  one is for a balance with a jeweled roller and the other with a brass finger. So before ordering you need to check and see which it is.   I have attached the tech sheet for the BFG 866 to give you some idea.

2529_BFG 866,866.31.7.pdf

Hi Just gone through all my Renata cat's   a dgt    =    avec doigt      (finger)   and      pl  =  plateau   (roller). 

  • Like 1
Link to comment
Share on other sites

34 minutes ago, watchweasol said:

Hi Andy   I have the catalogues but it does not explain the abreviations,.     remember these are swiss publications and therefore  are in their language.     But on the tech sheet there are two balances  complete  one is for a balance with a jeweled roller and the other with a brass finger. So before ordering you need to check and see which it is.   I have attached the tech sheet for the BFG 866 to give you some idea.

2529_BFG 866,866.31.7.pdf 3.21 MB · 1 download

Hi Just gone through all my Renata cat's   a dgt    =    avec doigt      (finger)   and      pl  =  plateau   (roller). 

Pretty sure this is relating to the guard finger on the fork of the lever. The roller has a notch that the finger skims through as it switches from one side of the staff to the other. Its a shock protection feature. The pl - plateau i would suggest means the roller has no notch and the fork has no guard finger. Coincidentally i was polishing the finger sides to contact the roller with less friction, i might add just for fun 😉. 

Edited by Neverenoughwatches
  • Like 1
Link to comment
Share on other sites

44 minutes ago, watchweasol said:

Hi Andy   I have the catalogues but it does not explain the abreviations,.     remember these are swiss publications and therefore  are in their language.     But on the tech sheet there are two balances  complete  one is for a balance with a jeweled roller and the other with a brass finger. So before ordering you need to check and see which it is.   I have attached the tech sheet for the BFG 866 to give you some idea.

2529_BFG 866,866.31.7.pdf 3.21 MB · 1 download

Hi Just gone through all my Renata cat's   a dgt    =    avec doigt      (finger)   and      pl  =  plateau   (roller). 

Thank you, that's greatl! My school boy French was failing me trying to find anything 🙂

14 minutes ago, Neverenoughwatches said:

Pretty sure this is relating to the guard finger on the fork of the lever. The roller has a notch that the finger skims through as it switches from one side of the staff to the other. Its a shock protection feature. The pl - plateau i would suggest means the roller has no notch and the fork has no guard finger. Coincidentally i was polishing the finger sides to contact the roller with less friction, i might add just for fun 😉. 

Thank you! That makes sense, there is a brass finger on the lever, so it looks like 'avec doigt' then 🙂

Andy

  • Like 2
Link to comment
Share on other sites

15 hours ago, fussbudget said:

Thank you, that's greatl! My school boy French was failing me trying to find anything 🙂

Thank you! That makes sense, there is a brass finger on the lever, so it looks like 'avec doigt' then 🙂

Andy

Eyup fuss, something got me thinking about the lever. i have an update on this for you. Just been looking though the bestfit catalog.  There are balance staffs that have a finger as opposed to a roller, non relative to a gaurd finger on the lever. Never seen one of these on a movement so you might want to look into that first. A staff with a roller has the guard finger of the lever on the bottom of the fork as in all modern modern and all old movements that I've seen up to now.  A staff with a finger instead of a roller  has the guard finger of the lever facing uppermost with the fork underneath it. Something before impulse jewels. Hope this makes sense

Edited by Neverenoughwatches
Added extra info.
  • Like 1
Link to comment
Share on other sites

On 11/16/2022 at 5:43 AM, Neverenoughwatches said:

Eyup fuss, something got me thinking about the lever. i have an update on this for you. Just been looking though the bestfit catalog.  There are balance staffs that have a finger as opposed to a roller, non relative to a gaurd finger on the lever. Never seen one of these on a movement so you might want to look into that first. A staff with a roller has the guard finger of the lever on the bottom of the fork as in all modern modern and all old movements that I've seen up to now.  A staff with a finger instead of a roller  has the guard finger of the lever facing uppermost with the fork underneath it. Something before impulse jewels. Hope this makes sense

Thank you, for more information! Sorry for the delay, trying to get clear photos of small parts....

The lever does have a finger on the bottom of the fork:

IMG_1887.thumb.JPG.72fb26e566aba2105e1f583fbdf46e28.JPG

and the balance has a roller with notch:

IMG_1892.thumb.JPG.6dd093b93171c87d026fa33f2c16fc0e.JPG

so I think that means the balance I need is 62 'avec doigt'.  I guess I'll order one and see 🙂

Cheers, Andy

Link to comment
Share on other sites

19 minutes ago, fussbudget said:

Thank you, for more information! Sorry for the delay, trying to get clear photos of small parts....

The lever does have a finger on the bottom of the fork:

IMG_1887.thumb.JPG.72fb26e566aba2105e1f583fbdf46e28.JPG

and the balance has a roller with notch:

IMG_1892.thumb.JPG.6dd093b93171c87d026fa33f2c16fc0e.JPG

so I think that means the balance I need is 62 'avec doigt'.  I guess I'll order one and see 🙂

Cheers, Andy

Haha. No mate i dont think so. Doigt is finger, finger on the staff . Yours has an impulse jewel. Maybe getting confused here , so lets go through it again. There are 2 fingers, a guard finger on the lever and a staff finger instead of a roller and impulse jewel. You want a roller = plateau.  🙂. This is what avec doigt looks like. 

Screenshot_20221117-185521_eBay.jpg

Edited by Neverenoughwatches
  • Like 1
  • Thanks 2
Link to comment
Share on other sites

3 minutes ago, Neverenoughwatches said:

Haha. No mate i dont think so. Doigt is finger, finger on the staff . Yours has an impulse jewel. Maybe getting confused here , so lets go through it again. There are 2 fingers, a guard finger on the lever and a staff finger instead of a roller and impulse jewel. You want a roller = plateau.  🙂

Aaaah so many new terms to learn 😳 This is why I put up photos, thank you. 🙂

Andy

 

  • Like 1
Link to comment
Share on other sites

Just now, fussbudget said:

Aaaah so many new terms to learn 😳 This is why I put up photos, thank you. 🙂

Andy

 

 

Just now, fussbudget said:

Aaaah so many new terms to learn 😳 This is why I put up photos, thank you. 🙂

Andy

 

To be honest i have not come across a staff with a brass finger as yet. As far as i know the guard finger on the lever is above the fork with this. So a quick recognition as soon as you look at the lever to say " oh no can i get a new staff for this if i need one " 😆

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • although not in this case.  It was the Lugano Convention and its deficiencies that allowed a Swiss court decision in the first place.  This isnt really a Brexit issue at all.  A decision that affects both the EU and the UK should never have been heard in Switzerland.
    • Hi guys I think that old hippy is correct, it opens the gates for china to manufacture aftermarket spare parts. considering that they already do work on behalf of the Swiss I guess this decision gives the a little more legitimacy to tool up and I am sure they will take advantage of the situation either with or without the blessing of the Swiss watch industry  Having read about the protectionist machinations of the Swiss in the history of Europe they were the only ones to get fat at everybody else’s expense. I think the outcome could have been guessed at but ,  fair play to Cousins UK for standing up to them.  Now the question,  will everybody boycott Swiss watches and Swatch, no way they will still fill their coffers.  Me I stick with the Japanese once renowned for cheap shitty watches who came good through industrial effort and don’t for get the Russians that most dismiss as low grade crap. Wouldn’t buy a swatch product ever how about you all.? a
    • Hold the crown when in winding position, move the click away from the crown wheel, and then while holding the crown let it slowly unwind. I recollect that you must remove the automatic device bridge first, but maybe I'm wrong. You can first try without removing the automatic device bridge.
    • nevenbekriev- You nailed it with your description of me and my reaction when the clock started ticking again. I am a newbie.  I love the sound and idea of mechanical clocks but the idea of owning one and trying to keep them running has never appealed to me. My wife bought this one and an antique German wall clock.  When I looked into having someone repair them for me, the universal response was "it's really expensive to work on them, you should just replace the movement". So, I had nothing to lose, I started researching them and opened them up. The wife is happy because she hears the sound of the clocks again. But I have gone down the "accuracy" rabbit hole. In the vertical position, the balance wheel was not floating. It was sitting on the bottom of the frame. I adjusted the lower spring collet and got it floating. It easily passed the 270 degree 3 to 5 minute oscillation test. It took 8 minutes for the wheel to completely stop moving.  I put it the unit back in the movement and checked the safety pin. It does not touch the safety roller anywhere in +/-270 degrees rotation from neutral position. But the amplitude of the rotation with the spring fully wound is weak based on what you are saying. It rotates +/-90 degrees from the neutral position.  No, I did not take the movement completely apart.  That seemed way outside my skill set at the time. There is a reason I became an electrical engineer and not a mechanical engineer. I am much more comfortable with moving electrons than tiny moving metal parts. Will I do it in the long run? Anything can happen. I don't seem to be able to let it go.
×
×
  • Create New...