Jump to content

Recommended Posts

Hello

Firstly let me apologize in advance for asking the same question that a lot of other people (myself included) have already asked.  I have a Bergeon Mainspring Winding Kit and I want to use it to re-install a mainspring correctly. I've provide two pictures; One with the lid off the barrel showing the mainspring and arbor and the second picture is of the arbor only. If I understand it corectly, then I want to wind the mainspring using the blue dot (left-hand / counterclockwise) winding arbor?

Thanks in advance for any help that can be provided.

Barrel - Bottom of Arbour Facing Up.jpg

Arbour Hook.jpg

Link to comment
Share on other sites

24 minutes ago, mcoulton said:

Hello

Firstly let me apologize in advance for asking the same question that a lot of other people (myself included) have already asked.  I have a Bergeon Mainspring Winding Kit and I want to use it to re-install a mainspring correctly. I've provide two pictures; One with the lid off the barrel showing the mainspring and arbor and the second picture is of the arbor only. If I understand it corectly, then I want to wind the mainspring using the blue dot (left-hand / counterclockwise) winding arbor?

Thanks in advance for any help that can be provided.

Barrel - Bottom of Arbour Facing Up.jpg

Arbour Hook.jpg

Your spring will only wind one way for obvious reasons, but it could be installed upside down in the wrong handed winder. Looking in the winder at the spring it will be the reverse of how it was in the barrel. To  simplify things imagine looking at the spring through the top of the winder, this will be the same orientation it was in the barrel. Good to take pictures or make a drawing showing which way the spring spirals in the barrel before removing. Not the end of the world if you dont as the arbor hook wil point you in the right direction also depending on the type of spring tail a barrel wall ledge will indicate spring direction.

Link to comment
Share on other sites

This is considered a right-hand wound spring because looking at it in the barrel, the spring coils to the right, or clockwise.

I originally thought the same way as you--if the arbor winds counter-clockwise, it must be a left-hand spring. This Esslinger blog post finally clarified it for me (emphasis mine):

Quote

Before you begin winding your mainspring you first need to tell if it needs to be wound clockwise or counter-clockwise. Most mainsprings are wound clockwise (spirals from the center to the right) – you can see this when you open the barrel and look down into the mainspring while it’s still in the barrel. There are some mainsprings that are wound counter-clockwise and this is why Bergeon makes “right” and “left” handed winding arbors. They are specified by a red (right-hand) or blue (left-hand) dot.

 

Link to comment
Share on other sites

Thanks very much for the help. 

Neverenoughwatches - I did your trick and looked down the winder from the plunger end - not the arbor winding end - and that naturally orientates the hook with the hook on the arbor that came out of the barrel.

ManSkirtBrew - Thanks for the Esslinger article. I'll make a note of it and add in my comments. 

 

  • Like 1
Link to comment
Share on other sites

6 hours ago, mcoulton said:

Thanks very much for the help. 

Neverenoughwatches - I did your trick and looked down the winder from the plunger end - not the arbor winding end - and that naturally orientates the hook with the hook on the arbor that came out of the barrel.

ManSkirtBrew - Thanks for the Esslinger article. I'll make a note of it and add in my comments. 

 

This way just saves having to figure things in reverse. You see it or rather imagine it as is. Without both handed winders the spring can be released into a spring holder that new ones arrive in, and then just spun over to be popped into the barrel. 

Link to comment
Share on other sites

8 hours ago, mcoulton said:

If I understand it corectly, then I want to wind the mainspring using the blue dot (left-hand / counterclockwise) winding arbor?

which watch does this mainspring barrel come from

the majority of watches will use a right-handed handle and they will wind in a clockwise direction. Some watches though are left-handed like Seiko watches. Or typically 18 size American pocket watches are left-hand.

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Very informative thread! After reading through, I ordered a lamp from Amazon. Under $49 US (£39) tax shipping and delivered in 6 hours, yep! This one has 5 intensity levels and 5 color settings from 3200 to 6500. I use a binocular microscope and have the gooseneck lamp in case I need directional light. Don't mind the clutter of watches, those are usually moved off the bench when working on a watch. This really lights up the area nicely. The ring of leds on the binoculars is fairly cool when compared to the new lamp. I like it because once set it returns back to the setting when turned off and back on again.
    • So fsr as assembly, I don't think you would find 5646 different from 5606, just that GS is 36000 beater. No unknown chalange is there as long as the escapement reamins undameged. Rgda
    • no, I have no alternatives and don't know of any. I've bought Mobius and that's all I have. 9010, 9104, 941, D5, 8000 and Moly-Kote.
    • I've just had the wood stove door seal replaced. I was hoping not to need to do that again for a few years. In the name of science I can't say I'm not tempted. I mean how dangerous can it be? Says the man who encouraged his friend the plumber to use phosphoric acid to dislodge the solidified sodium hydroxide that had blocked the bath U bend. We did take that outside first though, and yes, adding concentrated phosphoric acid to sodium hydroxide crystals and drain sludge is as bad an idea as it sounds.. so we did it several times, laughing like delinquent school boys until the explosions of brown goop stopped. The operation was a success, but sadly the patient died (or rather, melted), and we had to replace the U bend anyway.  Children, please don't try this at home.
    • I don't usually fancy the yellow crystals but it seems to work with that dial... ...and you can't set fire to it unless you share video. I speak for all of us...
×
×
  • Create New...