Jump to content

Mainspring winding tool size

DaveL
 Share

Recommended Posts

Kalanag Super WRT Addict

Kalanag

Posted
Posted

Taking the 10.8 gives the opportunity of using this winder with lots of popular movements in the future (ETA 28xx, Rolex). As long as your current movement is hand wound I would definitely purchase the 10.8. Going that narrow with an automatic spring might bend the bridle though.

Link to comment
Share on other sites
Neverenoughwatches Distinguished Member

Neverenoughwatches

Posted
Posted
9 hours ago, DaveL said:

Another new guy question I have a 12.44 mm barrel inside dimension,should I get a 12mm winder or a 10.8 mm, thanks again

Eyup Dave. I will say that I destroyed a mainspring once and also the hook on a spring winder by using a winder that was too small. If you see or suspect that the spring is becoming too tight in the winder then back off. I didnt leave enough space to release the arbor hook. Silly mistake but i did learn from it. If you do find that this happens and the hook is jammed it may be better to remove the spring from the winder from the opposite end and back it out again. This may damage the spring but better and cheaper that ruining you winder.

Link to comment
Share on other sites
VWatchie Distinguished Member

VWatchie

Posted
Posted
12 hours ago, DaveL said:

Another new guy question I have a 12.44 mm barrel inside dimension,should I get a 12mm winder or a 10.8 mm, thanks again

Mainspring winders are a complex topic. In short, to make them work really well they have to be manufactured for a specific calibre. That said, oftentimes we can get lucky that a winder for a specific calibre also works for another calibre. You'll find plenty of discussions on this topic here on WRT if you google it: site:watchrepairtalk.com mainspring winder

Anyway, I would recommend the 12mm winder. Chances are its arbor will fit the inner coil of your mainspring better. Do remember, there's no guarantee the winder will actually work with your spring unless it's specifically made for your calibre. With such a wide barrel you may want to wind it in by hand. Below is a link to a post by @nickelsilver (one of the most experienced pros on the forum) explaining how to do it.

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • GuyMontag
      Movement inserted from crytal side

      By GuyMontag · Posted

      Is the Roamer not a split stem? I'm confused on your how your case is put together. If it is a front loader where is it you are putting the case screws? I love me some Roamer, do you have any photos?
    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      Oh nice. I have a similar wedge style stump for my staking tool, so I'll give that a shot. Thanks!
    • joelcarvajal
      Gamblin Gamsol for cleaning?

      By joelcarvajal · Posted

      Thank you all for the replies!  Very informative! True enough, the Gamsol took some time to evaporate and does leave a residue. So not all naphtha are created equal!  Need to find alternatives then. i was able to try Hexane recommended by Alex and it seems great.  I wonder what the cons are?
    • GuyMontag
      1972 Bulova President "E" Sea King 11ACACB movement

      By GuyMontag · Posted

      Yeah, I saw that in the tech sheet but I don't see how it can be adequately cleaned with the friction pinion still in place. I've accidentally pulled the arbor right out of the wheel once when I used a presto tool to try and remove it. Mark shows how he does it with the Platax tool. Those are a little too pricey for me so I got one of these from Aliexpress and I just push down on the arbor with the end of my brass tweezers. That usually gets it most of the way out and then I just grab the wheel with one hand the and the friction pinion with the other and gently rotate them until it pops off. Probably not the best way but it's seemed to work for me so far.    
    • Zedster
      Movement inserted from crytal side

      By Zedster · Posted

      Thanks, Jon Sounds like a plan. Obviously I'll have the face on so do you think gripping with the holder will create any problems, but I will check in the morning to see how feasible it is but I assume it only needs to be lightly held. As for holding the movement instead of the holder won't be possible in this scenario as one hand will be puling on the stem while the other pushes the spring down. That was my initial concern is how the hell can I do this with only one pair of hands. All the other times I've had to remove the stem hasn't been a problem, apart from the force required to release the stem from the setting lever, but now I need to fit the face and hands its sent me into panic mode. If it had the screw type release things would be a lot simpler but that's life 😀   Another thing I will need to consider is once the dial and hands are fitted and the movement is sitting in the case I will need to turn it over to put the case screws in. I saw a vid on Wristwatch revival where he lightly fitted the crystal and bezel so he could turn it over, is this the only option or is there another method?      
×
×
  • Create New...