Jump to content

Vintage Homemade Crystal Press.............refurbished.


Geo

Recommended Posts

I purchased a cheap Chinese crystal press when I took up watch repairing/refurbishing a few years ago, this was one of the lever operated type with nylon dies. This has served me very well, but there are some jobs that a screw type of press is far better for because of the more sensitive control.

Being a canny Scot, I kept an eye on eBay for a second hand Robur or Horotec and stumbled across this antique home made press for £14 delivered.

post-124-0-00007400-1435348982_thumb.jpg

The engineer in me immediately saw the potential, all it needed was stripped down, modified to take new dies and repainted.

The other thing that was required was a set of new aluminium dies, so after a search on AliExpress I purchased these for £26 delivered from China.

post-124-0-76073200-1435349243_thumb.jpg

Right, down to business.

(1) Modify the lower die holder to accept the 6mm threaded alloy dies.

post-124-0-94920900-1435349432_thumb.jpg

(2) Make an adaptor to fit the bottom of the ram with a 6mm thread to take the dies.

(3) Machine the lower end of the pillar to give clearance for the largest die.

post-124-0-36916600-1435349599_thumb.jpg

(4) Accurise the dies to ensure that the faces are parallel. Many were slightly out of truth.

post-124-0-32890100-1435349819_thumb.jpg

post-124-0-79416000-1435349919_thumb.jpg

(5) Remove paint and rust from press, paint and polish.

post-124-0-97095300-1435350044_thumb.jpg

(6) Reassemble.

post-124-0-37129700-1435350123_thumb.jpg

Total cost of complete set £40.................well pleased!

post-124-0-85889900-1435350317_thumb.jpg

post-124-0-51590900-1435350248_thumb.jpg

  • Like 10
Link to comment
Share on other sites

PS didn't know you had a lathe. Wish I had room for one

Wouldn't be without it CB, I also have a lightweight milling machine. I put together a machine shop when I was building target pistols many years ago, now it so handy for both my motorcycle and horology interests.

post-124-0-45203200-1435391763_thumb.jpg

post-124-0-66002600-1435433663_thumb.jpg

  • Like 4
Link to comment
Share on other sites

  • 2 weeks later...

Looks great Geo, nice work. It reminds me that I bought a press very similar to yours meaning to convert it to take various dies I already have. You've inspired me to have another look at it, although I'll have to try and figure out a way to do it without the use of any similar equipment :). Not that easy when you're not particularly mechanically minded! Thanks for sharing.

Stephen

  • Like 1
Link to comment
Share on other sites

  • 4 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hello from the Mid-Atlantic United States. I've been in the hobby for a few months and have concluded that I will be staying in it for a while. I've started to get some proper tools and I am looking forward to developing some skills. My current goal is to get comfortable enough to service / repair some watches I've inherited from family members.  My current project is a Mentor pendent watch with a BF866 movement that belonged to my great aunt.
    • Success! The watch is working, albeit not perfectly. I need to install a new mainspring. It only runs about 16 hours. Still, it's my first cleaning and rebuild. I bought it from the original owner's son on eBay! The other one was bought at a flea market. I needed both to complete the project. The model with a seconds hand had soldered watch band pins and I couldn't drill tiny holes so I used the flea market Waldan, which was nearly a perfect match. I also replated the case with nickel, but the result was subpar. It's never as easy as it looks.
    • Thanks guys. It's a Seawolf 10ATM pre spring bezel. The case knife stressed me a bit, but eventually got it off and cleaned - nearly seventy years of grime.  Thanks.  Cheers John
    • Exactly. This is a pic of the hairspring I'm working on. My horizontal v vertical rates are all over the place. There is no discernible terminal curve. My problem is that the outer coil is (possibly) hitting the regulator pin. It's hard to tell but it looks to be getting very close. Also getting close to the stud, which could be @VWatchie's problem. You can see that I need to adjust the inner coil to centre the collet. That will hopefully solve the problem. But then I'll take the spring off and attach it to the cock to see how it looks.   I don't know if it's causing your problem @VWatchie, but I would say your inner coil looks like this  
    • Welcome to the forum.
×
×
  • Create New...