Jump to content

Pocket watch Mainspring barrel


Recommended Posts

Hi 

Have this 36mm antique pocket fob watch, not come across mainspring barrel like this before has a toothed wheel on bottom and an best describe as al apple she plat on top, one obviously has to come off to be able to remove the spline through middle and the barrel cover to get at spring. But cant find out how it comes apart have tried soaking it to see if can get apart but without forcing and damaging not sure how comes apart

Thanks 

 

PHOTO-2022-09-09-14-14-41-1.jpg

PHOTO-2022-09-09-14-14-42.jpg

PHOTO-2022-09-09-14-05-32.jpg

Link to comment
Share on other sites

You have a Geneva stopworks there, missing the second piece. This is a common occurence. Making or finding a new piece is time consuming in either case, and the watch will run fine without it. The ratchet wheel looks like it should pull off of the arbor, stout hand levers are good here. Some watches have the ratchet integral with the arbor, with the trick that the "bonde" or part that attaches to the mainspring is threaded on and unscrews to release the arbor/ratchet wheel. If that is the case, there will be 2 holes on the "bonde" to fit a tool to help unscrew it (but you can grasp it with very stout [nickel or brass] tweezers. In your case I think the ratchet wheel comes off due to the undercut around the square- that would be next to impossible to create by even modern machining methods.

  • Like 3
Link to comment
Share on other sites

Hi nicklesilver 

Thank you very much for your kind help 

dont suppose you would have a pic of where the missing part is ?

Do you have any other info about the movement as having trouble identifying it tried best fit encyclopaedia but cant find any setting mechanism to match. 

and no identifying marks other than on case ? 

Would be nice to know maker etc is geneva stop works the maker ?

Thanks very much

Bill 

 

Link to comment
Share on other sites

  • 3 weeks later...
  • 1 month later...
On 9/12/2022 at 4:11 AM, BillF said:

tried best fit encyclopaedia but cant find any setting mechanism to match.

one of the problems with books like bestfit are there specifically designed to identify watches that parts are available for them. Or at least parts at one time were available. Then they tend to be time-limited of how far back they will go they don't cover pocket watches to the beginning of time unfortunately.

then as the other problem of there were so many watches over time made that they just don't cover everything.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...