Jump to content

Pdf Of Practical Watch Repairs


Recommended Posts

I think it's best not to potentially get us in trouble with the copyright owner so I have removed it. But thank you anyway - i know you were just being helpful. :)

Link to comment
Share on other sites

HI Mark i wasnt sure if it was still under copy sorry if i did wrong

 

I believe it is still under copyright :)

 

I am no expert but I understand that copyright in the UK is for the lifetime of the author plus 70 years. Someone correct me if I am wrong.

Link to comment
Share on other sites

I believe it is still under copyright :)

I am no expert but I understand that copyright in the UK is for the lifetime of the author plus 70 years. Someone correct me if I am wrong.

[emoji106]

"Duration of copyright

The 1988 Copyright, Designs and Patents Act states the duration of copyright as;

For literary, dramatic, musical or artistic works

70 years from the end of the calendar year in which the last remaining author of the work dies.

If the author is unknown, copyright will last for 70 years from end of the calendar year in which the work was created, although if it is made available to the public during that time, (by publication, authorised performance, broadcast, exhibition, etc.), then the duration will be 70 years from the end of the year that the work was first made available."

  • Like 1
Link to comment
Share on other sites

  • 4 weeks later...

hey guys! i am new here,and really dont have much to contribute,yet i am very interested in this subject and hope you dont mind my sitting in the corner(so to speak) and learning !?

Welcome aboard Irish. There are a lot of good people on here willing to help out when they can. It doesn't matter whether you just want to tinker, or get into the serious side of watch repair, as long as you enjoy what you are doing. I'll go and clean out the corner to make it more comfortable for you! :)

  • Like 1
Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • The problem with a watch like this is where is the technical information? I wasn't even sure that was even based on anything it looks from the link I have below it is based on a real watch well loosely based so maybe there's technical? https://calibercorner.com/pts-caliber-dg-2813/ There guess the watch company has a tiny bit of technical they acknowledge they made the watch but not seeing any service information? https://miyotamovement.com/product/8215/ I did finally find a service sheet for the watch but as it said in the first link it's not an exact clone so that will be some variations. The problem with the Chinese watches they do not supply any technical information spare parts or anything at all other than a cheap watch Which is fine until you go to service the thing and then they'll be problems. On the other hand there clone of the 6497/6498 pocketwatch is almost identical and that means that there is a Swiss tech sheet available which is very very close unlike here where there'll be some differences Now this is a much better choice for watch as they have a website. I'm attaching the technical information for your watch from the website at least they have a really decent service guide versus the Chinese. https://www.timemodule.com/             8691_276584548-Spare-parts-reference-for-the-Miyota-8205-8215-movement.pdf NH35_PL.pdf NH35_SS.pdf NH35_TG.pdf
    • Guys, thanks for your help! According to the advice of a colleague @nevenbekriev, I managed to straighten the spring. Surprisingly, it turned out completely flat. Like new. And the watch after that, for the first time since it was with me, started running late. 🙂 That's great news!!! The rotation of the weights is about 190/200 degrees. In the past 12 hours, it was 4 minutes late. I still have enough room to speed it up. Looks like everything will be OK.  Thank you very much for your help!
    • Thank you for this post. Adding on to it, I've done a little digging trying to get the most bang for my buck. So I really wanted a set that had a base. You can buy the screwdrivers for around $33 usd 10 Piece Screwdriver Set. The base is around $32 usd Rotating Screwdriver Base (Grey) plus $20 in shipping, with tax you are looking at about $90 which is an excellent deal for what you get but I still didn't want to spend that much. I saw that they had the 9 piece set w/ base for $59 usd 9 Piece Screwdriver Set W/Base and I had a 'welcome discount' and got a matching 3mm screwdriver for 99 cents. 3mm Screwdriver. (without the discount the screwdriver is $6) With free shipping my total was $66.55 usd. So, I saved about $24 to go without a slot for a 3mm screwdriver. I'll take that! I hope this helps anyone looking to save a buck or two. Also, this corrects the issue of the orange 1.8mm screwdriver. 😉
    • No hex wrench needed there. Screw driver in case of AS1475 or just push the poinst down in case of Poljot2612.
    • Well, what is written here can't be explained with the wear of the winding/sliding pinion. Probably it is some kind of delusion from You side. But it prevented the people from pointing the reason of what is happening. Otherwice, this kind of wear is one of the common problems of winding works in watch movements. It meets often in old or cheap movements, or particulary in negative stem system pocket movements where not proper adjustment of the sleeve that guides the stem is done.  
×
×
  • Create New...