Jump to content

How To Keep A Loupe From Fogging


Recommended Posts

Here is the beginners question for today. When I use a loupe after about two to three minutes fog developes on the inside of the loupe such that I cannot see. I can take the loup off my eye and rub the fog away, but it returns in short order. It is so annoying that it makes using a loupe a chore. Is there a fix for this? Thanks in advance for your help and advise.

Link to comment
Share on other sites

I tend to find it depends a lot of the eyeglass I'm using, my bergeon 3x eye glass never fogs for whatever reason, probably to do with the property of the materials used. my cheap 12x (two lenses) did until I drilled a hole in the body to allow the moisture to escape.

Weirdly enough it was my experience before then that my eyeglass would steam less quickly if my face and eye muscles were relaxed, but I don't know If I was just imagining that to be the case. 

Edited by Ishima
Link to comment
Share on other sites

Here is the beginners question for today. When I use a loupe after about two to three minutes fog developes on the inside of the loupe such that I cannot see. I can take the loup off my eye and rub the fog away, but it returns in short order. It is so annoying that it makes using a loupe a chore. Is there a fix for this? Thanks in advance for your help and advise.

 

Bill I know exactly what you mean mate!

Nothing is more frustrating then a loupe fogging up when you're trying to concentrate on a difficult task.

 

This is why I don't wear a loupe any more.

If you'd ask me whats the best investment I've made in this trade, that's help me progress and given me a huge advantage, I'd tell you without a shadow of doubt: it's in optics.

 

The only optics I use is a pair of Carl Zeiss - Eye Mag Pros.  Yes they weren't cheap, but they have more than paid for themselves with the comfort and joy of being able to clearly see what I'm doing, and in stereo vision: giving me full depth perception; which an eye loupe will never do.

 

And guess what .... they NEVER fog up ... EVER!

 

Here's my write-up on them mate.

http://www.watchrepairtalk.com/topic/896-carl-zeiss-eye-mag-pro/?hl=zeiss

Link to comment
Share on other sites

Just for the sake of the input, I follow the swimmers trick, being a diver myself, and spit in all glasses/optics in order to prevent fogging. It does work maybe because of my particular spit or because it is so, don't ask me why though. :)

 

Cheers,

 

Bob

Link to comment
Share on other sites

  • 5 years later...

Just revive this thread as a motorcyclist I use dish soap to stop my goggles from fogging up. It works I even use it on a mirror in my shower so I can shave....just take a drop of soap and apply a thin layer to the lense...it won’t affect clarity

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Oh nice. I have a similar wedge style stump for my staking tool, so I'll give that a shot. Thanks!
    • Thank you all for the replies!  Very informative! True enough, the Gamsol took some time to evaporate and does leave a residue. So not all naphtha are created equal!  Need to find alternatives then. i was able to try Hexane recommended by Alex and it seems great.  I wonder what the cons are?
    • Yeah, I saw that in the tech sheet but I don't see how it can be adequately cleaned with the friction pinion still in place. I've accidentally pulled the arbor right out of the wheel once when I used a presto tool to try and remove it. Mark shows how he does it with the Platax tool. Those are a little too pricey for me so I got one of these from Aliexpress and I just push down on the arbor with the end of my brass tweezers. That usually gets it most of the way out and then I just grab the wheel with one hand the and the friction pinion with the other and gently rotate them until it pops off. Probably not the best way but it's seemed to work for me so far.    
    • Thanks, Jon Sounds like a plan. Obviously I'll have the face on so do you think gripping with the holder will create any problems, but I will check in the morning to see how feasible it is but I assume it only needs to be lightly held. As for holding the movement instead of the holder won't be possible in this scenario as one hand will be puling on the stem while the other pushes the spring down. That was my initial concern is how the hell can I do this with only one pair of hands. All the other times I've had to remove the stem hasn't been a problem, apart from the force required to release the stem from the setting lever, but now I need to fit the face and hands its sent me into panic mode. If it had the screw type release things would be a lot simpler but that's life 😀   Another thing I will need to consider is once the dial and hands are fitted and the movement is sitting in the case I will need to turn it over to put the case screws in. I saw a vid on Wristwatch revival where he lightly fitted the crystal and bezel so he could turn it over, is this the only option or is there another method?      
    • Hi Jon, do You think that relation spring torque - amplitude is linear? I would rather guess that the amplitude should be proportional to the square of the torque. I had once idea to check it, but still haven't.
×
×
  • Create New...