Jump to content

Shedlands

Shedlands

By Shedlands
in Introduce Yourself Here

 Share

Recommended Posts

Shedlands New Member

Shedlands

Posted
Posted

Hi, 

I am very very new to watch repairing but I have over a dozen mechanical watches upstairs none of them work, not to mention a few clocks. I became fascinated, in fact quite transfixed to the YouTube videos of watches being dismantled and reassembled. My only experience is for my A-Level physics class I set a project for the students to workout how a Smiths Electric clock works and attempt to repair one. I am retired now and thinking of starting technician diploma in watch  & clock maintenance and repair.  It will be very interesting to read about peoples experiences when mending watches and hope to learn a lot. I am from Bridport, Dorset England. 

Link to comment
Share on other sites
grsnovi Distinguished Member

grsnovi

Posted
Posted

Welcome to the forum! You'll find quite a few enthusiasts who are eager and learning however there are also a couple of very knowledgeable individuals who keep us on the right track. I find that it can be helpful to read of others having issues as I have either run into the same problems or expect to at some point.

Enjoy!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Jon
      What are these Seitz B-Jewels?

      By Jon · Posted

      I picked up a similar amount of these jewels some years ago in a watch and clock fair. Every now and then they come in handy. This week I've got a rubbed in bombe jewel in the balance cock that is cracked and needs replacing. Very handy to have a vintage assortment of these type of jewels!
    • Stirky
      Diagram for 6497 motion works

      By Stirky · Posted

      Thanks Jon.
    • Jon
      Diagram for 6497 motion works

      By Jon · Posted

      Great diagram with the teeth and pinion count. Simple way to reduce the speed of the hour wheel by the 12:1 minute wheel. Genius and yet so simple. Always good to reinforce the principal by what you have done in your drawing. Keep doing that. I had a drawing on my wall for years showing me this which is very similar to the drawing you have done. Here's a formula to work out the beats per hour of a watch movement. The movement's BPH is dictated by the wheel teeth and pinion count and the hairspring being vibrated to the correct BPH by finding the pinning up point on the hairspring using a vibrating tool.  The reason in the formula there is X2 on the top line is because there are two pallet stones.
    • DDean
      Incabloc Lyre Spring & Low Earth Orbit

      By DDean · Posted

      So I just wanted to say "thank you" again.  The angle is the key bit it seems and yes, it did basically just fall, or float, back into position when I got it lined up just right. I had meant to add that now that I see how it goes in, I totally see how it came out in the first place, and that whomever cloned the original movement didn't pay much attention to the fine details around the setting or how it interfaces with the balance cock or the "rings" on the regulator and/or stud carrier arms.
    • transporter
      Commando special

      By transporter · Posted

      Well I’ve never seen the make before and cannot find any info, I haven’t got it just yet it’s been left to me among a 1970’s sea master and a mid size yeoman. But if anyone has any information on this one please feel free to enlighten me, many thanks 
×
×
  • Create New...