Jump to content

How to find watch parts?

tdfguy
 Share

Recommended Posts

tdfguy New Member

tdfguy

Posted
Posted

Hi All,

I am quite new to the watch repair world.  Aside from eBay, are there other online places were one might find parts specific to a watch movement.  I recently posted about a main plate in which I screwed up a gear post because a screw had broken off.  I would like to obtain a new main plate for the same watch (Montilier 60).  Is this a movement that is so old that I am dreaming?

Thanks in advance,

Don

  • Like 1
Link to comment
Share on other sites
tdfguy New Member

tdfguy

Posted
  • Author
Posted

I have ordered from Cousins but so far as I know, they don't have movement main plates, right?  Same goes for the other recommendations.  I am really wondering if I am not clued into how others may be finding "hard to find" components of watch movements?!  Perhaps this is tribal knowledge that is mostly not shared?

Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted (edited)
1 hour ago, tdfguy said:

I have ordered from Cousins but so far as I know, they don't have movement main plates, right?

Manufacturers didn't and don't make the main plate available as spare. That may or not make sense, but so it is. 

 

1 hour ago, tdfguy said:

 I am really wondering if I am not clued into how others may be finding "hard to find" components of watch movements?!

Have you considered that it can be that others either buy a donor watch (searching and waiting for as much is needed), or may never get the part alone. The other possibility is that skilled watchmaker make or adapt what is needed by themselves. 

 

1 hour ago, tdfguy said:

Perhaps this is tribal knowledge that is mostly not shared?

Surely not. There is no secret place for parts, everyone  can  make the same online searches with the same results. And for those that have parts to sell best and fastest way is online as well.

Nowadays more than before, if you bring a broken watch to a professional repairer, the answer will be that he can't repair it because can't get parts.

Edited by jdm
  • Like 1
Link to comment
Share on other sites
LittleWatchShop Distinguished Member

LittleWatchShop

Posted
Posted
1 hour ago, tdfguy said:

finding "hard to find" components

You must be patient.  Watch ebay daily for a donor.  It may take two days or two years, or maybe never,  Join NAWCC forum and ask there (I have had no luck there so far).

As @jdmsaid, you may have to adapt what you have, or ask a watchmaker to do it for you.

  • Like 1
Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted (edited)
27 minutes ago, LittleWatchShop said:

Watch ebay daily for a donor.

No need to watch, just set a  new llisting notification (using an external website or app may be more efficient that Ebay itself). That, and bid sniping services, are serious buyer's best tools.

As it happens, watch repair is an hobby or profession that requires a great amount of patience, both at bench and not. But I guarantee that there will be always something on the bench waiting to be taken care of, while you're waiting for other parts or tools.

Edited by jdm
  • Like 1
Link to comment
Share on other sites
mikepilk Distinguished Member

mikepilk

Posted
Posted
2 hours ago, tdfguy said:

I have ordered from Cousins but so far as I know, they don't have movement main plates, right?  Same goes for the other recommendations.  I am really wondering if I am not clued into how others may be finding "hard to find" components of watch movements?!  Perhaps this is tribal knowledge that is mostly not shared?

" as far as I know" - so you haven't bothered to look ? You have to make some effort to find the more obscure parts !

Cousins do sell mainplates (just type "mainplates" in the search box), but not the one you want.

Finding a donor movement on ebay may be your best bet.

Link to comment
Share on other sites
mikepilk Distinguished Member

mikepilk

Posted
Posted
1 hour ago, LittleWatchShop said:

Indeed!!  I weep daily over my Cyma 571 begging for a balance complete (or hoping to muster up enough courage to make an overcoil from my 571 planar hairspring that I bought).

Likewise - whilst trying to fix the overcoil on the hairspring of my Universal Geneve Cal  267, I released the tweezers too early and trashed the whole thing. Had to wait 2 years before I found another movement I could use the balance from.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • VWatchie
      Watch of Today

      By VWatchie · Posted

      Yes, as watch repairers we never ever use force, we use percussive persuasion! 🤣 
    • VWatchie
      Trying to close the mainspring barrel pivot, but the hole simply will not close up

      By VWatchie · Posted

      I have a barrel bridge arbor bearing that needs a slight reduction. I have never closed a barrel bridge arbor hole before and my staking set has a very limited number of doomed punches and most of them are too small (go through the hole) or too short to fit in the lower section of my inverto-style Boley & Leinen staking tool. So, I'm considering ordering a few doomed punches from CousinsUK. My question is what sizes I should order? Is there a rule of thumb relating to the hole diameter? I too worried that reducing the hole size would increase the end-shake. Especially as Kalle Slaap talks about end-shake at the end of the video at 7:43, but then he just glosses over it by saying "You can just gently push the material back in", which I don't get at all 🤔 Anyway, I feel a lot less worried now after having seen @mikepilk's excellent illustration. Thanks!
    • Waggy
      DIY Screw polisher

      By Waggy · Posted

      If you have access to a 3D printer, here is my design I did a few weeks ago:  
    • mikepilk
      DIY Screw polisher

      By mikepilk · Posted

      I finished my polisher yesterday, and just tried it out. I'm surprised how easy it is to get a good result - just a couple of minutes. I thought it was going to be more difficult - a nice surprise as most things in watchmaking are harder than you expect. I bought self adhesive 3M lapping film https://www.cousinsuk.com/product/film-lapping-3m-261x266x , 9, 3 and 1 micron, and stuck it to sheets of glass. The 9 micron is course enough to remove large scratches.  I'm glad I used the M6 thumb screws as the large heads allow for small adjustments.
    • RichardHarris123
      Introduction

      By RichardHarris123 · Posted

      Hello and welcome from Leeds, England. 
×
×
  • Create New...