Jump to content

Recommended Posts

Hi All,

I am quite new to the watch repair world.  Aside from eBay, are there other online places were one might find parts specific to a watch movement.  I recently posted about a main plate in which I screwed up a gear post because a screw had broken off.  I would like to obtain a new main plate for the same watch (Montilier 60).  Is this a movement that is so old that I am dreaming?

Thanks in advance,

Don

  • Like 1
Link to comment
Share on other sites

I have ordered from Cousins but so far as I know, they don't have movement main plates, right?  Same goes for the other recommendations.  I am really wondering if I am not clued into how others may be finding "hard to find" components of watch movements?!  Perhaps this is tribal knowledge that is mostly not shared?

Link to comment
Share on other sites

1 hour ago, tdfguy said:

I have ordered from Cousins but so far as I know, they don't have movement main plates, right?

Manufacturers didn't and don't make the main plate available as spare. That may or not make sense, but so it is. 

 

1 hour ago, tdfguy said:

 I am really wondering if I am not clued into how others may be finding "hard to find" components of watch movements?!

Have you considered that it can be that others either buy a donor watch (searching and waiting for as much is needed), or may never get the part alone. The other possibility is that skilled watchmaker make or adapt what is needed by themselves. 

 

1 hour ago, tdfguy said:

Perhaps this is tribal knowledge that is mostly not shared?

Surely not. There is no secret place for parts, everyone  can  make the same online searches with the same results. And for those that have parts to sell best and fastest way is online as well.

Nowadays more than before, if you bring a broken watch to a professional repairer, the answer will be that he can't repair it because can't get parts.

Edited by jdm
  • Like 1
Link to comment
Share on other sites

1 hour ago, tdfguy said:

finding "hard to find" components

You must be patient.  Watch ebay daily for a donor.  It may take two days or two years, or maybe never,  Join NAWCC forum and ask there (I have had no luck there so far).

As @jdmsaid, you may have to adapt what you have, or ask a watchmaker to do it for you.

  • Like 1
Link to comment
Share on other sites

27 minutes ago, LittleWatchShop said:

Watch ebay daily for a donor.

No need to watch, just set a  new llisting notification (using an external website or app may be more efficient that Ebay itself). That, and bid sniping services, are serious buyer's best tools.

As it happens, watch repair is an hobby or profession that requires a great amount of patience, both at bench and not. But I guarantee that there will be always something on the bench waiting to be taken care of, while you're waiting for other parts or tools.

Edited by jdm
  • Like 1
Link to comment
Share on other sites

2 hours ago, tdfguy said:

I have ordered from Cousins but so far as I know, they don't have movement main plates, right?  Same goes for the other recommendations.  I am really wondering if I am not clued into how others may be finding "hard to find" components of watch movements?!  Perhaps this is tribal knowledge that is mostly not shared?

" as far as I know" - so you haven't bothered to look ? You have to make some effort to find the more obscure parts !

Cousins do sell mainplates (just type "mainplates" in the search box), but not the one you want.

Finding a donor movement on ebay may be your best bet.

Link to comment
Share on other sites

1 hour ago, LittleWatchShop said:

Indeed!!  I weep daily over my Cyma 571 begging for a balance complete (or hoping to muster up enough courage to make an overcoil from my 571 planar hairspring that I bought).

Likewise - whilst trying to fix the overcoil on the hairspring of my Universal Geneve Cal  267, I released the tweezers too early and trashed the whole thing. Had to wait 2 years before I found another movement I could use the balance from.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • 🤔 leaving the EU meant that UK was no longer part of the convention and have already been turned down an independent reapplication. I'm pretty sure courts have to be held in Switzerland in this case. There will be a lot more watches stashed away in draws  tbh, folk wont be able to afford to maintain them. Cheap watches will be bought and top end watches by folk with plenty of cash that can pay for service and repair. The expensive once in a lifetime gifts and everything else inbetween will be at the forgotton when they stop working. I know i was being a numpty, get used to it 😄 Anybody that knows will boycott them, but besides repairers who will know. Nope will never buy one, i made that decision as soon as i learnt about this. 
    • although not in this case.  It was the Lugano Convention and its deficiencies that allowed a Swiss court decision in the first place.  This isnt really a Brexit issue at all.  A decision that affects both the EU and the UK should never have been heard in Switzerland. I bet the authorised service centres in the UK are pretty pleased.  It's a massive shame, though; I believe watch owners should be able to choose to have their watch serviced by whoever they trust.
    • Hi guys I think that old hippy is correct, it opens the gates for china to manufacture aftermarket spare parts. considering that they already do work on behalf of the Swiss I guess this decision gives the a little more legitimacy to tool up and I am sure they will take advantage of the situation either with or without the blessing of the Swiss watch industry  Having read about the protectionist machinations of the Swiss in the history of Europe they were the only ones to get fat at everybody else’s expense. I think the outcome could have been guessed at but ,  fair play to Cousins UK for standing up to them.  Now the question,  will everybody boycott Swiss watches and Swatch, no way they will still fill their coffers.  Me I stick with the Japanese once renowned for cheap shitty watches who came good through industrial effort and don’t for get the Russians that most dismiss as low grade crap. Wouldn’t buy a swatch product ever how about you all.? a
    • Hold the crown when in winding position, move the click away from the crown wheel, and then while holding the crown let it slowly unwind. I recollect that you must remove the automatic device bridge first, but maybe I'm wrong. You can first try without removing the automatic device bridge.
×
×
  • Create New...