Jump to content

WOTD (watch of the day)


grsnovi

Recommended Posts

I'd gotten each of my five brothers a nice watch when they turned 50. They wanted to get me something when I turned 65 (3 years ago Friday) and although they wanted to spend more than this, I really liked the look of this Bulova.

wotd.jpg

  • Like 2
  • Thanks 1
Link to comment
Share on other sites

You know, I didn't mean to start my own WOTD thread and honestly didn't see the other one yesterday. But it seems to have turned into Andy's comments in general... 🙂

I was going to post a chronograph today (in honor of my comments elsewhere) but all three of mine need batteries (I said I never wear them). This is another Bulova. It's been snorkeling with me in Grand Cayman, Mexico and Hawaii. Today it's going with me to get a shot in my shoulder that will hopefully help my "frozen shoulder" un-freeze. My appointment is in an hour from the time shown.

I certainly don't plan to do a post like this every day (my selection is pretty boring). I do hope others (even Andy) will post what they're wearing.

 

wotd2.jpg

Edited by grsnovi
added note
Link to comment
Share on other sites

Not a bad idea; WOTD. Many other forums do have such a thread 👍

Here's my today's watch; a modern version of the old Russian "Strela". The old version (IMHO real) Strela had a Poljot 3017 (Venus 150/152) movement. Next there are Strela's with the Poljot 3133 (Valjoux 7734) movement and the modern Strela has the Chinese Seagull 1901 (Venus 175) movement; apart from the looks, not much Russian left.

But, it suited my needs 🙂  I wanted a modern 21,600bph column chronograph, in a modern 40mm housing with a homage to the old (now $$$ and most likely worn-out) Strela. Bought 2nd hand (3-years old and in absolute mint condition) and after some minor beat & daily-rate adjustments it now runs (on my wrist) spot-on, straight lines with an amplitude of 320 degrees (*assumed 52˚ lift-angle) and 0.0ms beat-error. No need for a service yet but I'm looking forward, at some time in the future, to tear the column-chronograph apart 🙂

* "Nobody" seems to know the official lift-angle, so if anybody has the official data of the Seagull ST1901 (or the ST19xx's line), I would very much like to hear ....... 😉

IMG_1820.thumb.JPG.c5e6602afbe1395facf0389a194aa232.JPG

Edited by Endeavor
  • Like 2
Link to comment
Share on other sites

I've been proudly wearing my recently serviced (and first chrono) Poljot 3133 "Blue Angels" Navitimer. I think it looks great.

Although it resembles (🤣) another "Navitimer", there is one crucial difference. On this one the bezel does not rotate, so all the scales on the bezel and dial don't do anything - they're just for show. On the Breitling version they work as a circular slide rule for calculating speeds, distances, fuel burn etc. Still, it cost me about 1/15 of the price of an "real" one, so I'm happy. 

Now, what next?  I need to check out those Strela's @Endeavor 😃

_a.thumb.jpg.b765712799ab9ae6379dab84d6eeba32.jpg

_b.thumb.jpg.c9cd6bec70970ba2b789afdb569212bc.jpg

  • Like 4
Link to comment
Share on other sites

Yes, I used to have the Poljot "Antonov" which has the same bezel. It's a nice looking watch but as with yours, it has some, lets be polite; additional "decoration".

Antonov.jpg.69f94877805d555edf296c9741794aae.jpg

If you like to check out the Strela's; be aware that the prices asked for the real (Poljot 3017) Strela's are climbing per day and it's a minefield out there. Even though the looks may be good, but you may not get were you are hoping & paying for !!

After all those years I'm a bit done with worn-out, tinkered to dead chronographs. I much rather pay the extra for NOS or, if those options aren't available, a watch an alternative modern movement. Obviously I do prefer the NOS option ...... so much more pleasure to work on and the end result is as you were expecting ! 🙂

 

Edited by Endeavor
  • Like 2
Link to comment
Share on other sites

14 minutes ago, mikepilk said:

On this one the bezel does not rotate, so all the scales on the bezel and dial don't do anything - they're just for show.

A not-always-respected convention is that on a scale which doesn't rotate numbers or letter from 4 to 8H are printed upright. You can see that done on Strela above, but not on the Polijot.

  • Thanks 1
Link to comment
Share on other sites

On 6/21/2022 at 12:27 PM, Kalanag said:

It’s a quartz movement, is it?

Yes it is. Oddly enough I have quartz watches that are 40 years old running like champs - never having been "serviced" other than a battery change.

Those watches above are indeed beauties. After I do whatever it is I'm going to do to the recently acquired Pobeda, maybe I should look at other Russian watches (however I'll try not to source from Ukraine - at least in the short-term).

1 hour ago, jdm said:

A not-always-respected convention is that on a scale which doesn't rotate numbers or letter from 4 to 8H are printed upright

A detail that I'm not sure I'd ever even notice even if I had one of each type! Thanks jdm!

Edited by grsnovi
Link to comment
Share on other sites

I now noticed that there is already much longer (since 2015) and still current existing thread  Watch of Today;

I think I'll contribute to that one instead of having two of the same threads running parallel 😉

 

Edited by Endeavor
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Before putting it back in the case I would fit the hands and use a pin vice on the stem to make sure the hands were in line. 
    • Put the movement in a movement holder and it will be supported as you push down on the setting lever post to release the winding stem. Make sure the post is over the shoulder of the movement holder so what you are pressing down on is supported. As a general rule, hold the movement and not the movement holder. Replace the hands when the movement isn't in the case and support the centre jewel (if it has one) on a hard surface or staking block when replacing the hands to stop the jewel accidentally moving or even coming out. A dedicated movement holder with a central jewel support is even better, but pricey
    • It might help us if we knew which watch like model number.
    • Hi, guys I have a bit of a predicament and hopefully, somebody can advise. I'm working on a Roamer MST 521 where the movement is extracted from the crystal side. I'm now at the final hurdle where I need to replace the movement back into its case but I'm not sure of the correct procedure. I still need to fit the hands but that's where the problem lies. If I insert the winding stem to test the hands for correct alignment I will need to turn the movement over to release the stem again it's the spring-loaded type and needs a small bit of force to push down but with the hands fitted, I don't think I can do this on a cushion without causing some damage to the hands and that's the last thing I want to do, this watch has already been a love-hate relationship and I'm so close to boxing this one off which I'm counting as my first major project.  The other option is to case the movement then fit the hands and hope everything is okay. I've already broken the original winding stem but managed to find a replacement, the last one in stock, so I'm a bit reluctant to keep removing it. Any suggestions would be appreciated. 
×
×
  • Create New...