Jump to content

Tutorials by Alex Hamilton


Recommended Posts

1 hour ago, Kalanag said:

There is a new channel called „It‘s About F*****g Time“ by watchmaker Alex Hamilton (known on Youtube by his channel „The Watchsmith“) . The new channel is dedicated to watch repair tutorials for beginners and worth watching imho.

https://youtube.com/channel/UCXV8h3I9pnfZuDpg6xEM_8w

He's a great guy and has a brilliant sense of humour. He goes into quite deep detail as well. Hehe, he even gave me a shout out in one of his videos 😛

  • Like 1
Link to comment
Share on other sites

Subscribed on my computer but was unable to find using search on the Fire Stick/TV where I watch most (so I actually had to log-in on the TV). Will run through what he's got posted to date...

Link to comment
Share on other sites

We can remove the balance- cock assembly  safer than the bearded guy.

Do not remove the cock screw, just loosen it enough to loosen the cock, once you have partially unpinned the locating pins,  proceed with removing the cock screw. 

With this approach you have the cock secured on the mainplate by the cock screw( not fully unscrewed, not removed) , preventing cock from falling off as you are unpinning it. 

                Better safe than to look pro.

 

  • Like 2
Link to comment
Share on other sites

45 minutes ago, Nucejoe said:

We can remove the balance- cock assembly  safer than the bearded guy.

Do not remove the cock screw, just loosen it enough to loosen the cock, once you have partially unpinned the locating pins,  proceed with removing the cock screw. 

With this approach you have the cock secured on the mainplate by the cock screw( not fully unscrewed, not removed) , preventing cock from falling off as you are unpinning it. 

                Better safe than to look pro.

 

That’s a very good tip, thank you. Suffice to say I’ve had the cock jump off the plate when trying to lift it off the steady pins, only for it to land next to the movement with hairspring attached. And a few more grey hairs in my beard 🤣

  • Like 1
  • Haha 1
Link to comment
Share on other sites

My watchmaker used to say " hairspring is the first part newbies ruins and spend most time on to sort out often with poor results". 

Bunch of good advice from Alex though,     don't ruin it to begin with.

 

Link to comment
Share on other sites

On 6/21/2022 at 4:25 PM, gbyleveldt said:

Hahaha no ways, I thought you knew from the Tissot video?

Nice one bearded buddy👍. Call me number 246. Lol 😆 

3 minutes ago, Neverenoughwatches said:

Nice one bearded buddy👍. Call me number 246. Lol 😆 

Maybe I'll send you this. It seems quite apt now i know you also have a mass of facial hair. (As well) 😆

16559152244372036939529477045648.jpg

Link to comment
Share on other sites

10 hours ago, gbyleveldt said:

Hahhahahahaa awesome!

So you are the man to talk to about Seikos, cool. Its good to specialise, my forté is being a lazy good for nuthin 😄. Nah this is my gym top 

16559575213922589202267376599419.jpg

8 minutes ago, gbyleveldt said:

I can pretty much taste the irony. Gorgeous George🤣 He is a big one though . Wow

Actually a big softy and was prancing around with 5 other little dogs. When you are this big and dominating you dont need to be aggressive, life is sweet. Anyway love your channel 👍 watched a couple and will watch the rest as well. All power to you matey for having the bottle, something I've been considering for a little while. I hope you do well, lets get you up to some big numbers subs. 

Link to comment
Share on other sites

1 hour ago, Neverenoughwatches said:

So you are the man to talk to about Seikos, cool. Its good to specialise, my forté is being a lazy good for nuthin 😄.

I wouldn't call myself an expert by any stretch of the imagination. It's just easier to find parts for Seikos than for the average swiss watch so that's what I gravitate towards. That Tissot was a classic example of what a typical swiss movement costs to repair vs what it's worth. It's doing pretty well video wise but outside of that it's still worth maybe $100-$150 after it was restored. A nicely restored popular Seiko is worth more and costs less to repair for the same effort (I'm talking divers here). The point may be moot as I don't sell any of the watches I get going again haha.

Lazy, nah, any guy that works with his hands the whole day is far from lazy. At the end of the day, you can stand back and see what you've made with those hands. I know you said it in jest but us "works with our hands" types are a dying breed. My son turned 18 now and he couldn't be bothered (nor can most of his friends) working with his hands. They all want the cushy jobs; I guess it's my fault for being soft with them. Whew, that went dark quick...

1 hour ago, Neverenoughwatches said:

Anyway love your channel 👍 watched a couple and will watch the rest as well. All power to you matey for having the bottle, something I've been considering for a little while. I hope you do well, lets get you up to some big numbers subs. 

Thank you very much Rich, I really do appreciate it.

  • Like 1
Link to comment
Share on other sites

I really liked Alex's video on dressing your tweezers and screwdrivers and ordered a rolling screwdriver jig yesterday.

I'm not that enthused about having him walk me through the mechanical disassembly/re-assembly of an ST36 where there is (or hasn't been yet) ANY mention of lubrication. 

To be fair he's only put up 7 videos so far and they've been well done. If nothing else, I'm planning to dress my (brand new) tweezers and screwdrivers and practice picking stuff up.

  • Like 1
Link to comment
Share on other sites

I suspect he will be dedicating a video solely to lubrication, hence why he hasn’t brought it up yet. I get the impression that he’s compartmentalising each subunit of a movement per video and focusing only on that. Would be a great resource as well down the line: “I’m battling with a balance, oh yes it was such and such video”. Easiest way to get to the important stuff, as opposed to skipping through an hour long video with every thing in it.

  • Like 1
Link to comment
Share on other sites

1 hour ago, gbyleveldt said:

I suspect he will be dedicating a video solely to lubrication, hence why he hasn’t brought it up yet. I get the impression that he’s compartmentalising each subunit of a movement per video and focusing only on that. Would be a great resource as well down the line: “I’m battling with a balance, oh yes it was such and such video”. Easiest way to get to the important stuff, as opposed to skipping through an hour long video with every thing in it.

Just finished watching the 7s26/36 seiko 5 sports restoration, cracking video and the finished watch and end display made it look bloody gorgeous 👍. Need more subscribers matey a lot more.

Link to comment
Share on other sites

Thank you Rich! Those were my first ones so feeling my way in the dark then. I’m still sitting with a dilemma as to format. Do I talk and try and be informative (boring you to tears in the process). Or do I just keep my trap shut and get on with it? Looking at the analytics, it suggest people prefer me quiet. Which is fine as it’s less work. But then it’s no longer informative and only entertaining. Hmmmm

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • That would be something! Which brings me back to;  
    • you think you're going to sleep tonight you're not, you're going to ponder the question of what makes you think those of the right parts?  
    • Does anyone knows what size case a need for a dial diameter 20.60mm?
    • Sounds like the story with my Rolex. Poor (expensive) job done by an official Rolex dealer with an "in-house" watchmaker, hence I learned watchrepair and did the servicing myself. Same story as I learned with the Omega 861, again poor job by an "in-house" watchmaker by an official Omega dealer. Once your watch goes through that back-door, you have no idea what is going to happening to it 🫣   Quite nice that they sent back the parts which had been replaced !
    • yes that's definitely not right at all. I have a picture one of my friends has a Omega coaxial there was having issues to lose asking me where he should send it. As that's a specialty watch I suggested the service center. When he got it back he sent me a picture so the replace the dial as you can see the hands the mainspring barrel and I think the price was really quite decent considering all the stuff they can replace. So I do know they do change the barrels but the other person I worked at the service center when I would ask questions and unfortunately I can't remember all the answers. I think a lot of the changing a parts is at the discretion of the watchmaker. Plus I don't know enough about the chronographs and whether that would be considered a vintage watch? I take some of the vintage watches may have been sent directly to Switzerland or another service center. Obviously with a watch like the one down below they probably have a infinite supply of parts is its relatively modern vintage stuff becomes more interesting even the watch companies don't have necessarily infinite supply of parts. But no matter what the watch shouldn't disintegrated six months that's definitely an issue.        
×
×
  • Create New...