Jump to content

Close but No Cigar


Recommended Posts

In parallel with fiddling with actual old watch movements, I've been working through Mark's online watch repair course. To date I've worked through 21 lessons covering 97 topics. Although I "technically" passed my Level 3 course with a 76% score on the assessment (where the average is only a 78%) I didn't do well enough to receive a certificate as I did with Levels 1 and 2.

Luckily there's no time limit on access to the courseware so I plan to work through the 5 movements I have on hand and re-do the Level 3 FAULT FINDING course again. Truth be told, I knew once I got started that fault finding was going to be more difficult than either Level 1 or 2 and I was actually surprised that I got 76% on the assessment. I was also encouraged that the average grade was only a 78% which means that while I didn't do great - nobody else did either.

So, I guess the "achievement" here is that I'm only just beginning this journey and (possibly) that you can teach an old dog new tricks?

  • Like 3
Link to comment
Share on other sites

I don't know how long you have been working on Mark's courses. When I started my apprenticeship back in the early 70's it took me 5 years of learning then another 2 what they called improving so 7 years and even now being on this wonderful interesting forum I'm still learning I read something new nearly every day. grsnovi, you will never learn everything there is to know in horology. Keep at it just improving your skills will make you a better watchmaker. 

  • Like 3
Link to comment
Share on other sites

Practice makes perfect.  I usually tell folks if you have problems assembling flatpack (IKEA) furniture then don't bother with watches. If you can dismantle/service/assemble stuff like car carburetors/brakes/engines then you're good to go.

Anilv

 

  • Like 1
Link to comment
Share on other sites

1 hour ago, oldhippy said:

I don't know how long you have been working on Mark's courses. When I started my apprenticeship back in the early 70's it took me 5 years of learning then another 2 what they called improving so 7 years and even now being on this wonderful interesting forum I'm still learning I read something new nearly every day. grsnovi, you will never learn everything there is to know in horology. Keep at it just improving your skills will make you a better watchmaker. 

A subject doesn't exist were someone knows everything.  They is always something to learn on any topic. 

  • Like 1
Link to comment
Share on other sites

7 minutes ago, oldhippy said:

I no nothing about cars and I don't buy flat backed furniture. 

That might be that therory out of the window then. Haha. But I'm thinking that OH you have good taste in furniture and that you prefer to ride a pushbike .lol

3 minutes ago, RichardHarris123 said:

A subject doesn't exist were someone knows everything.  They is always something to learn on any topic. 

Mostly yes i totally  agree with that. Unless your name is Godfrey as mine is. You can call me God for short . 😄

12 hours ago, grsnovi said:

In parallel with fiddling with actual old watch movements, I've been working through Mark's online watch repair course. To date I've worked through 21 lessons covering 97 topics. Although I "technically" passed my Level 3 course with a 76% score on the assessment (where the average is only a 78%) I didn't do well enough to receive a certificate as I did with Levels 1 and 2.

Luckily there's no time limit on access to the courseware so I plan to work through the 5 movements I have on hand and re-do the Level 3 FAULT FINDING course again. Truth be told, I knew once I got started that fault finding was going to be more difficult than either Level 1 or 2 and I was actually surprised that I got 76% on the assessment. I was also encouraged that the average grade was only a 78% which means that while I didn't do great - nobody else did either.

So, I guess the "achievement" here is that I'm only just beginning this journey and (possibly) that you can teach an old dog new tricks?

Yes G absolutely not possibly  you can. We should be realistic to a point to avoid disappointment.  But never underestimate what you can do. 👍

  • Like 1
Link to comment
Share on other sites

3 hours ago, Paul80 said:

Hope you weren't on a mission

No mission Paul. The first one was mostly things that I had absorbed while watching 3 dozen or so YT videos and was rather easy. I had started that mid-March while working on the first Elgin. I went through the material for Level 2 in April and wanted to do the fault finding one since all of the movements that I have to work on are non-runners (other than the Seagull ST36 that I purchased to work on for Level 2).

I think I learn better while doing.

Link to comment
Share on other sites

grsnovi

Well done!

 

Like you I'm doing Marks course. As a complete novice I tried the Youtube watch and learn. However Mark's Course gives direction. Level 1 achievement was 90%. I'm mid-way though level 2. Never realised how much I did not know, and did wrong with regard to cleaning. 

The forum is great help.

Really enjoying the training. 

Regards to all.

Ross

  • Thanks 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • that band is old as stated, there is a kit that pops up from time to time on selling sites for the repair of these type bands, some of this type are adjustable on a few links, one adjustable type allows you to align the round opening in the expansion slit [like yours] with the rivet to separate, but if yours won't come out then the rivet head is too big and will have to be done with some rivet removal and replacement, I suppose if you could make/optain the correct rivets that one could alter the said band, the tops/caps do lift off after raising the tabs....  
    • This is a watch from a friend who sent it to a neighborhood watchmaker for a battery change. It came back with the watch stem in a ziplock bag and the dial skewed 20°. The watchmaker told him that the stem was faulty and the watch cannot be repaired. I opened up the watch and found that one dial foot was broken off and still stuck in the movement, while the other was bent until it was flat against the dial. The stem could be inserted but it couldn't be pulled out to quickset and time adjusting positions. I did a full disassemble, cleaned and oiled the movement. But when it put in the battery, the second hand runs super fast. Like it gains 30 mins every hour. Any advice on fixing this problem? TIA.
    • I determined that the balance staff is rotating, not the roller table, so my second attempt at riveting was unsuccessful. I have ordered a new balance staff and will take measurements when it arrives. The balance staff i originally ordered (and now reordered) was specified as: Replacement balance staff: (A. Schild Caliber 984 1002 1021 1124 Original Balance Staff Part 723) so it should be correct. Measurements: (see pic below for terminology) xxxyy is a place holder until the new balance staff arrives. Lower pivot: Old - .08 mm New - xxxyy Lower pivot to balance seat: Old - 1.53 mm New - xxxyy Roller shoulder: Old - .42 mm New - xxxyy Hub: Old - xxxyy New - xxxyy Balance shoulder: Old - .86 mm New - xxxyy Collet shoulder: Old - .56 mm New - xxxyy Upper pivot: Old - broken New - xxxyy
    • Hello and welcome from Leeds.  We're here to help. 
    • I was just about to adk that, probably they have unnecessary waiting lists to make their watches appear more exclusive than they actually are.
×
×
  • Create New...