Jump to content

Timex 21 Jewel - Introduction Letter 1962


Recommended Posts

Well, it certainly looks like what I expected to see.  But what about numbers? What kind of accuracy did all those jewels give it?  I can't see Timex jumping on the jewel bearing bandwagon unless there were gains (and thus future sales) to be had.

Link to comment
Share on other sites

3 minutes ago, RichardHarris123 said:

Very droll. Hehe.

Haha. You dont like my toilet humor then ? Lol.  I think its a good idea, so beginners know what to look out for and to avoid when buying. Since starting here I'm now careful that seiko and Timex can be more problematic than most and can have complicated and unsually difficult designs to work with. Have you a good story ? 

Link to comment
Share on other sites

52 minutes ago, Neverenoughwatches said:

Haha. You dont like my toilet humor then ? Lol.  I think its a good idea, so beginners know what to look out for and to avoid when buying. Since starting here I'm now careful that seiko and Timex can be more problematic than most and can have complicated and unsually difficult designs to work with. Have you a good story ? 

 Had a few Timex ladies watches, nor working and unfixable cheap and nasty movements.  In the scrap bin. I try to avoid now.

Link to comment
Share on other sites

6 minutes ago, RichardHarris123 said:

Had a few Timex ladies watches, nor working and unfixable cheap and nasty movements. 

I've had pretty limited success with those too. They may not be *THE* worst movements, but they are certainly in the running for the title. Even they are fixable if you have a slightly masochistic streak, and maybe a donor movement.

Modern quartz movements are worse in the sense that pretty much everything is plastic, often glued together and you have zero chance of getting spare parts. Add to that the fact that you have a fifty fifty chance of a leaky battery having dissolved some vital part, and I would say they are probably worse.  

EDIT: Swatch... need I say more?

Edited by AndyHull
  • Like 1
Link to comment
Share on other sites

14 minutes ago, AndyHull said:

I was going to tell a suppository joke, but I figured the moderators would never pass it. 

Oh just go for it Andy, i seem to get away with alsorts of things. Its all down to your delivery. Lol

12 minutes ago, AndyHull said:

I've had pretty limited success with those too. They may not be *THE* worst movements, but they are certainly in the running for the title. Even they are fixable if you have a slightly masochistic streak, and maybe a donor movement.

Modern quartz movements are worse in the sense that pretty much everything is plastic, often glued together and you have zero chance of getting spare parts. Add to that the fact that you have a fifty fifty chance of a leaky battery having dissolved some vital part, and I would say they are probably worse.  

EDIT: Swatch... need I say more?

Oh Andy i think youve just sealed the fate of me buying one of their moonwatches. They are so pretty as well. Not that i would have ever opened the back, but having cheap tat on my wrist would bring out the sadist in me and my 2 lb lump hammer.

  • Like 1
Link to comment
Share on other sites

6 minutes ago, Neverenoughwatches said:

Oh just go for it Andy, i seem to get away with alsorts of things. Its all down to your delivery. Lol

Two old gents are sitting down to breakfast in the local cafe one morning.
Bob looks over at his pal and sees something strange sticking out of his ear.
"Hey Jim, did you know you have a suppository sticking out of your lug" he asks.
Jim reaches up and removes the offending item.
"Bob, I'm sure glad you spotted that, now I think I know where I must have put my hearing aid."

 

  • Haha 4
Link to comment
Share on other sites

3 minutes ago, AndyHull said:

Two old gents are sitting down to breakfast in the local cafe one morning.
Bob looks over at his pal and sees something strange sticking out of his ear.
"Hey Jim, did you know you have a suppository sticking out of your lug" he asks.
Jim reaches up and removes the offending item.
"Bob, I'm sure glad you spotted that, now I think I know where I must have put my hearing aid."

 

 

32 minutes ago, AndyHull said:

I was going to tell a suppository joke, but I figured the moderators would never pass it. 

I like the bear one thats going around. Theres a guy on you tube that cant get through the joke for laughing. Its a stupid joke but to watch him tell it is hilarious.

Link to comment
Share on other sites

2 hours ago, RichardHarris123 said:

Maybe we should start a worst movements ever post.

I still think for "worst ever", some of those cheap Chinese movements that turn up in "replica" watches have Timex beat every day of the week.  Gad I hate seeing those.  The pivots break off if you just look at them wrong.  Some are worse than others, but man they're awful as a whole.  I'd rather work on a Timex.

  • Like 1
Link to comment
Share on other sites

53 minutes ago, Neverenoughwatches said:

Oh Andy i think youve just sealed the fate of me buying one of their moonwatches. They are so pretty as well. Not that i would have ever opened the back, but having cheap tat on my wrist would bring out the sadist in me and my 2 lb lump hammer.

I think the problem I have with Swatch is the fact that they are designed to be disposable. The Timex 21 was at least designed that it *could* be serviced, but the Swatch designs are such that in almost all cases it is almost impossible to even open the watch without damaging it. You *can* fix them (and I have fixed a couple of Swatch Ironys) but the "designed to be disposable" nature just annoys me. I would rather wear something that doesn't have a factory fitted,  pre-paid ticket to the land fill.

Edited by AndyHull
  • Like 1
Link to comment
Share on other sites

29 minutes ago, KarlvonKoln said:

I still think for "worst ever", some of those cheap Chinese movements that turn up in "replica" watches have Timex beat every day of the week.  Gad I hate seeing those.  The pivots break off if you just look at them wrong.  Some are worse than others, but man they're awful as a whole.  I'd rather work on a Timex.

Yeah the teeny tiny chinese quartz movements surrounded by a 48mm case and with hands the size of a 6 ft 4in lumberjack. The day it stops it sees the back of a wheely bin.

3 minutes ago, AndyHull said:

I think the problem I have with Swatch is the fact that they are designed to be disposable. The Timex 21 was at least designed that it *could* be serviced, but the Swatch designs are such that in almost all cases it is almost impossible to even open the watch without damaging it. You *can* fix them (and I have fixed a couple of Swatch Ironys) but the "designed to be disposable" nature just annoys me. I would rather wear something that doesn't have a factory fitted,  pre-paid ticket to the land fill.

Aw swatch's moonwatch. Pretty to look at but cheap tacky and money grabbing on the inside. I went through a few of those before i met my missus. 😄

52 minutes ago, KarlvonKoln said:

I still think for "worst ever", some of those cheap Chinese movements that turn up in "replica" watches have Timex beat every day of the week.  Gad I hate seeing those.  The pivots break off if you just look at them wrong.  Some are worse than others, but man they're awful as a whole.  I'd rather work on a Timex.

And also fashion watches. You see men and women looking at them in jewellery shops. You know the ones Armani, Gabo kors and such. I cant help but stand next to them while my wife is looking at braclet charms and say out loud, "hmm i wonder why some people dont buy real watches anymore" . She ends up pulling me away and telling me to behave myself. Do I ?  Nah why change the habit of a lifetime. 

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Well done, let us know how you get on with the citizen. 
    • @Neverenoughwatches Rich, I can only agree with you wholeheartedly. I spend a lot of time here learning all sorts and trying to make any little contribution to help others I can. Nothing can last forever and I wish I could do more to contribute to the forum financially and any other support I could.   Tom
    • This forum is a big part of my life. When I retired from horology many years ago due to poor health I missed what I had trained for. On here I can still do my bit in helping and advising others and have a little fun as well.  
    • First thing this morning, make coffee, second, check the forum.  I would really miss the forum, not on any social media, not interested in telling the world what I had for breakfast!!! I do consider most of the regulars friends and would wonder what had happened if they stopped posting. 
    • Hi all Thought I'd show my small and trying to keep under control watch collection! Apart from the Enicar all were under £12! At least if I destroy them in the process then I won't be too worse off. A few pics to start off with First of all my first attempt. A Thuya pocket watch. It was only running face down and would stop when vertical. So now it still works face down and only slows down when vertical so at least an improvement! 😄  I only have a generic watch oil at the mo so that won't help but I'm hoping to get some more appropriate oils in a couple of months for my birthday. I did have to get a crystal for it since it didn't come with one. It didn't look as though it would friction fit (and I don't have a crystal press in any case) so I glued it to the case with PVA. So far so good. Next up above are a sekonda and citizen automatic. Both non runners. Both with broken balance wheels amongst other things. I'm hopeful the citizen will start when I get the new one I ordered but the sekonda is being kept for spares and trial of new techniques. And finally the Enicar and the timemaster. Both running when I got them. I wanted to get running watches so that at least I stood a fighting chance of still having a running watch after the service! It was all going well on the Enicar until I dropped the balance wheel during reassembly...😔. Unfortunately they are quite expensive to get so for now I'll won't do anything with it but I would like to fix it at one point. The timemaster is still running (yeah!) but I managed to break a dial foot during the deassembly. First repair attempt failed so now I am looking at soldering it back on... So there we go. My initial foray into this great hobby. Thanks for sticking with this tale so far.  I'm hoping that once the balance wheel arrives for the citizen I will be able to say I bought a non runner and fixed it! So fingers crossed. Thanks for looking, Nick
×
×
  • Create New...