Jump to content

Hello!


Recommended Posts

Hi everyone

 

I'm seeking advice for a watch I've been gifted from an elderly relative and is in need of repair. Google brought me here and I hope some of you will have advice to share. I'm from Scotland and have a keen interest in repairing watches, although I am far more experienced in electronics, so I still have a lot to learn about watches.

Thanks :)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Plastic crystals have a lot of stress and this will eventually show up as a lot of hairline fractures on the crystal. If you are saying you want to save the original I would recommend not bothering they are considered consumables. Get an original crystal installed by a proffessional is the best route. Not much difference in price to buying one from them and installing  it yourself. Anilv
    • Say that fast 5 times 😂
    • I have a few questions on the use of a (lever-type) jeweling tool in the adjustment of jewel endshakes, as I have never done this before. 1. If the endshake is too much or too little, how do you choose where to adjust the endshake? Do you adjust the endshake on the train bridge, or the main plate, or both? How do you decide which is the best? 2. When inserting the pusher into the spindle of a lever-type jeweling tool, such as a Favourite, is the best practice to take out the entire spindle from the tool frame to insert the pusher? And likewise, take out the entire spindle from the tool frame to remove the pusher? Or is it perfectly ok to insert or remove the pusher when the spindle is still inside the jeweling tool frame. Which way is safer/ best practice. 3. Is there an attachment to the base of the jeweling tool to hold the mainplate or bridges? I don’t seem to see any for sale, new or otherwise. Can I make one?
    • In the USA, you could try: https://www.jewelerssupplies.com/ or http://www.julesborel.com/ Cousins in the UK might be a possibility (although Waltham is a US watch, I'm sure some of them made it across the pond). https://www.cousinsuk.com/ Mark also has a list here: https://www.watchfix.com/category/watch-parts-tools-suppliers/watch-parts-tools-suppliers-us/
    • Yup. It's like the song from The Greatest Showman.... Never Enough! Never, never...
×
×
  • Create New...