Jump to content

1929 Harwood


Geo

Recommended Posts

This watch arrived today from Switzerland and I’m absolutely delighted with it. It is better than expected, the dial is original and there are hardly any marks on the case, pretty good for an eighty six year old! Even the bezel rotates easily, maybe too easily.

post-124-0-48131500-1430942400_thumb.jpg

post-124-0-84136600-1430942419_thumb.jpg

There had been no attempt made clean it up prior to the sale as the silver had a fair bit of tarnish on it. There are no badly damaged screws, and the damascening on the movement is unmarked. The advert said that was “used and in running condition” and “Needs service before wear”. The first thing I did was give it a few shakes and put it on the timegrapher, well it looked like a target that had been shot with a sawn off shotgun.

post-124-0-64839900-1430942481_thumb.jpg

Next thing was to demagnitise it and low and behold things got a lot better.

post-124-0-89190600-1430943221_thumb.jpg

I then gave the crystal a rub with 1200 wet& dry and polished it with Autosol, the case was also given a light polish, but only with a silver cloth.

post-124-0-49020600-1430942538_thumb.jpg

Having had it on my wrist for a few hours, I then put it back on the timegrapher and it was keeping better time, albeit with a wonky graph. It will be put away for a while until I clear my feet of other projects, then it will get a full service.

post-124-0-76917600-1430942581_thumb.jpg

My sincere thanks go to Colin (CDJSwiss)for introducing me to these wonderful historical pieces.

  • Like 1
Link to comment
Share on other sites

Congratulations, Geo, it's a beauty with the pearling, relatively rare, and the decorated dial window,  very rare - copied on all of the replica Harwoods. What are the silver marks - Swiss or UK?

 

Swiss Patent 106583:
selfwinding mechanism
filed 10-16-1923, John Harwood, Baldrine-Lonon (Ile of Man, GB) und Harry Cutts, Brighton (GB)

 

Interesting result of de-magnetisation. I must try it - never done it on a complete watch, only on a balance bridge and hairspring carefully wrapped in tissue paper.

  • Like 1
Link to comment
Share on other sites

Good morning Colin.

The hallmarks are British, London import mark, Sterling silver mark and date letter for 1929 at the top. At the bottom is the makers mark for George Stockwell and the serial number. Below the serial number is a letter S and I have no idea what that is for.

post-124-0-55747900-1430978412_thumb.jpg

I should have said in my first post that I had to demagnetise the watch twice before it would run accurately.

Link to comment
Share on other sites

Thanks, George, for this photo (good advertising for Chrono24 also!).

 

I have just put a complete watch onto my de-magnetiser (not an expensive one) and was alarmed at the 50 Hz noise that was produced, presumable by the hairspring vibrating? Could it be that apart from removing any residual magnetism this also cleans the hairspring?

Link to comment
Share on other sites

I can't see it cleaning it, unless there was a lot of steel swarf sticking to it! I feel it is a lot safer to demag the complete watch as everything is held together securely. Also everything in the watch that is steel will be demagnetised.

I would just like to mention for others that may be interested, the results that on the Harwood were achieved with demagnetising alone, I did not adjust the regulator at all.

Link to comment
Share on other sites

I have been looking into the marks. This watch was presumably produced in collaboration with Fortis for international markets at Walter Vogt's factory in Grenchen. The case would have been made in CH as it has the London import mark and GS as importer. The S under the serial number was probably the sign of case maker Stila of La Chaux-de-Fonds.

  • Like 1
Link to comment
Share on other sites

Continuing the Harwood silver marks saga, Here is a photo of my silver Harwood watch back.

 

post-374-0-66828400-1430990621_thumb.jpg

 

Imported by a Glasgow sponsor in 1929. That's the easy bit. But the mark A5M is a mystery. There has been some discussion on watchuseek between David Boettcher and another person who has also seen this mark, but without clarification. There is no known Glasgow silversmith or sponsor using the mark AM.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I think it is friction fit, there are tools to remove them, cheaper versions are available. You could try adapting some pliers, see my crap drawing.  The pushers are available in various sizes, you could measure once the tube is removed. 
    • The entry jewel's not as bad but seems still too much lock. I do epilame the escape wheel and pallet jewels, then run dry for about 15 minutes, then put 9415 in exit jewel very little at a time and check with backlight how the oil's distributed.  Another question is about capped escape wheels. Should I somehow wear the epilame off the pivots before installing the wheel? I normally let the escape wheel run dry for that said 15 minutes when there's no cap jewel.
    • Sometimes there's a certain place under the bezel where the case knife is supposed to be placed. In this borrowed pic there's a small crack at 3 o'clock. 
    • Hi my fellow forum addicts, I'm writing this as I seem to have a hole in my knowledge (probably one of many!) I seem to have a horrible time removing bezels from watches. I am talking about the rotating type on sports/diving watches. I see many videos where the guy on screen barely inserts the case knife under the bezel and with no effort it pops off easily, then at the end it clicks back into place by hand with no effort. I am sure that part of this is due to skillful video editing, but I seem to wrestle with them, I have tried case knives and  even when using the tool below, I tighten it up in several positions and nothing happens. On a many occasions I have even warped the bezel in my attempts to remove it. Similarly, I have issues replacing bezels after cleaning etc. and often they have to be replaced using a press tool and inevitably are far too tight and will not rotate or loose to the point where they fall off or loose their click (perhaps due to micro warping when I tried to remove??). It is now to the point where I am actually avoiding watches with bezels as my success rate with them is terrible......please help!! In short I am asking: What am I doing wrong? What is the best method for removing bezels - how do you do it? What is the best method for replacing bezels - how do you do it? Any tips or tricks? Thanks  
    • Amplitude still seems low, but I'm going to let it run in a bit and revisit. Meanwhile, got the first layer of the calendar works together and made sure the date ring snaps to both in quickset and regular setting. The mechanism is pretty cool, so I took a video.  
×
×
  • Create New...