Jump to content

1929 Harwood


Geo

Recommended Posts

This watch arrived today from Switzerland and I’m absolutely delighted with it. It is better than expected, the dial is original and there are hardly any marks on the case, pretty good for an eighty six year old! Even the bezel rotates easily, maybe too easily.

post-124-0-48131500-1430942400_thumb.jpg

post-124-0-84136600-1430942419_thumb.jpg

There had been no attempt made clean it up prior to the sale as the silver had a fair bit of tarnish on it. There are no badly damaged screws, and the damascening on the movement is unmarked. The advert said that was “used and in running condition” and “Needs service before wear”. The first thing I did was give it a few shakes and put it on the timegrapher, well it looked like a target that had been shot with a sawn off shotgun.

post-124-0-64839900-1430942481_thumb.jpg

Next thing was to demagnitise it and low and behold things got a lot better.

post-124-0-89190600-1430943221_thumb.jpg

I then gave the crystal a rub with 1200 wet& dry and polished it with Autosol, the case was also given a light polish, but only with a silver cloth.

post-124-0-49020600-1430942538_thumb.jpg

Having had it on my wrist for a few hours, I then put it back on the timegrapher and it was keeping better time, albeit with a wonky graph. It will be put away for a while until I clear my feet of other projects, then it will get a full service.

post-124-0-76917600-1430942581_thumb.jpg

My sincere thanks go to Colin (CDJSwiss)for introducing me to these wonderful historical pieces.

  • Like 1
Link to comment
Share on other sites

Congratulations, Geo, it's a beauty with the pearling, relatively rare, and the decorated dial window,  very rare - copied on all of the replica Harwoods. What are the silver marks - Swiss or UK?

 

Swiss Patent 106583:
selfwinding mechanism
filed 10-16-1923, John Harwood, Baldrine-Lonon (Ile of Man, GB) und Harry Cutts, Brighton (GB)

 

Interesting result of de-magnetisation. I must try it - never done it on a complete watch, only on a balance bridge and hairspring carefully wrapped in tissue paper.

  • Like 1
Link to comment
Share on other sites

Good morning Colin.

The hallmarks are British, London import mark, Sterling silver mark and date letter for 1929 at the top. At the bottom is the makers mark for George Stockwell and the serial number. Below the serial number is a letter S and I have no idea what that is for.

post-124-0-55747900-1430978412_thumb.jpg

I should have said in my first post that I had to demagnetise the watch twice before it would run accurately.

Link to comment
Share on other sites

Thanks, George, for this photo (good advertising for Chrono24 also!).

 

I have just put a complete watch onto my de-magnetiser (not an expensive one) and was alarmed at the 50 Hz noise that was produced, presumable by the hairspring vibrating? Could it be that apart from removing any residual magnetism this also cleans the hairspring?

Link to comment
Share on other sites

I can't see it cleaning it, unless there was a lot of steel swarf sticking to it! I feel it is a lot safer to demag the complete watch as everything is held together securely. Also everything in the watch that is steel will be demagnetised.

I would just like to mention for others that may be interested, the results that on the Harwood were achieved with demagnetising alone, I did not adjust the regulator at all.

Link to comment
Share on other sites

I have been looking into the marks. This watch was presumably produced in collaboration with Fortis for international markets at Walter Vogt's factory in Grenchen. The case would have been made in CH as it has the London import mark and GS as importer. The S under the serial number was probably the sign of case maker Stila of La Chaux-de-Fonds.

  • Like 1
Link to comment
Share on other sites

Continuing the Harwood silver marks saga, Here is a photo of my silver Harwood watch back.

 

post-374-0-66828400-1430990621_thumb.jpg

 

Imported by a Glasgow sponsor in 1929. That's the easy bit. But the mark A5M is a mystery. There has been some discussion on watchuseek between David Boettcher and another person who has also seen this mark, but without clarification. There is no known Glasgow silversmith or sponsor using the mark AM.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • They are for balance wheels only and wheels with similar pivots (B = bombé). You can use flat jewels for balance wheels (not recommended)  but no bombé jewels for ordinary wheels.
    • Not SS but very slight wear on the underside edges have a little brass showing under magnification. New crystal arrived £3 with tax. Nice champagne dial color.
    • I also just realized I had that tech bulletin saved...but in French for some reason 🙂 No, I don't speak French. 2172_Bulova 11AOAC 11AOACD 11AOACB.pdf While parts are drying I'm on the hunt for a replacement crystal. I can measure the opening and get a generic one, but it'd be nice to find out what the original looked like first. Of course, case code 3093 does not appear in any of my reference materials. JulesBorel lists a C3093 case code, and shows Bulova part # 1222-5. Does anyone have information on this guy? I found a thread here talking about how the -5 is the height of the crystal, but that's as far as I've gotten. I also found one site that claims to have it in stock, but before I risk my $20 I'd like to confirm it's the right part.  
    • Thanks for the replies. I did the job today and found that the oversized stem fitted just perfectly into the worn mainplate without any adjustment. Original stem diameter was 1.24mm and the oversized was 1.40mm. I did have to make an adjustment to the setting lever though. The small pip that engages with the groove in the stem hub was slightly to wide. I made that a bit smaller with a fine file. Don't ask me why that was too big, it just was. All working very well now. No wobble and not pulling out. New crown fitted as good measure.
×
×
  • Create New...