Jump to content

Bulova Accutron 2180 2181


Recommended Posts

18 hours ago, JohnR725 said:

I somehow doubt that that's the problem as I've never heard of that before. We really need a picture.

I think I'll test my theories in the future before guessing the outcome. I tried a 343, 344 and 350 in a spares movement and the outcome was the same each time - I could get each battery to not start.

I might try and investigate the capacitor(s) next...

IMG_20220102_155312.thumb.jpg.871ebe4088fdfac0200fed1754fcab71.jpgIMG_20220102_155618.thumb.jpg.64cffb0fef6af1b4cb60e08267dc24eb.jpg998050016_ESA9162circuit.thumb.jpg.3a4f8322f1b08335567378c3cd1ea61a.jpg

 

Link to comment
Share on other sites

1 hour ago, Plato said:

I could get each battery to not start.

Just a clarification so things are clear in my mind. Just to be clear on things you do know that the watch is not necessarily a self-starter. In other words I'm going to snip something out of the service manual for the 218. Notice the reference that you have to give it a start. So in other words it's not a 100% the watch will start with power it sometimes needs a little help and the manual was written with the thought of using a Mercury battery.

218 not necessarily self starting.JPG

  • Thanks 1
Link to comment
Share on other sites

5 minutes ago, JohnR725 said:

Just a clarification so things are clear in my mind. Just to be clear on things you do know that the watch is not necessarily a self-starter. In other words I'm going to snip something out of the service manual for the 218. Notice the reference that you have to give it a start. So in other words it's not a 100% the watch will start with power it sometimes needs a little help and the manual was written with the thought of using a Mercury battery.

218 not necessarily self starting.JPG

So there may be nothing wrong with a tuning fork watch that doesn't start each and every time? Just a quirk of that type of movement? 

Link to comment
Share on other sites

36 minutes ago, JohnR725 said:

Yes exactly there's nothing wrong with the watch.

Thanks @JohnR725. I have two nice Omegas that I didn't feel right to sell on thinking they had a problem. I was happy to keep and wear them knowing full well that a little tap would see them run but not good enough for sale. I'm going to keep one and sell the other to fund more projects 🙂

Link to comment
Share on other sites

  • 6 months later...
1 hour ago, LittleWatchShop said:

If you want to build it yourself, here is a solution that I found on the web a while back.

If I remember right the person of posted this design adapted a Bulova variable power supply which is why it's such a peculiar design.

Then if you're looking for another idea of the simple design here's what I use.

lm10 voltage regulator watch repair.JPG

lm10.pdf

Link to comment
Share on other sites

Is there one I could buy that would work?

5 hours ago, JohnR725 said:

If I remember right the person of posted this design adapted a Bulova variable power supply which is why it's such a peculiar design.

Then if you're looking for another idea of the simple design here's what I use.

lm10 voltage regulator watch repair.JPG

lm10.pdf 2.59 MB · 0 downloads

I might be able to build this if I knew what that thing in the middle was.

Link to comment
Share on other sites

Sorry for late response.  My computer is f upped and wont let me download photos.  Will this meter work and can I build the power supply in it?  Is the power source a 9v battery?  What controls the voltage amount?  I think that I can build it with a little help.

IMG_5167.JPG

IMG_5168.JPG

Link to comment
Share on other sites

16 minutes ago, markr said:

Will this meter work and can I build the power supply in it?

No, the voltage range is too high.  Your power supply maximum voltage is less than two volts.  Now for me, I would build a supply that goes to about 3.2 volts because it would be more general purpose for quartz watches.  But 10 volts is way too high.

The circuit @JohnR725posted is fine for your application.  I would use a digital meter if your only goal is to provide voltage (not measure current).  I will sketch something up for you and post it a little later.

 

Link to comment
Share on other sites

Use this for your volt meter.

Shown here is a schematic and a layout.  I did not try to make this compact so it is laid out very loose.

Check my work...cranked out pretty fast.

You can download the software used to generate these and order them online.  You get three boards for about $60.  US made and very high quality.

In this layout, the Meter and pot are not intended to be placed on the PCB but shown this way for checking purposes.

The bypass caps are overkill.

If you want to build this, I can PM you the files and a link to the fab.

2022-08-01 16_17_13-ExpressPCB - F__Documents_Docs_Engineering_2016_Projects_LM20 power supply.pcb.png

2022-08-01 16_15_10-ExpressSCH - F__Documents_Docs_Engineering_2016_Projects_LM20 power supply.sch.png

Edited by LittleWatchShop
  • Thanks 2
Link to comment
Share on other sites

3 hours ago, LittleWatchShop said:

No, the voltage range is too high.  Your power supply maximum voltage is less than two volts.

Yes the problem of normal power supplies are not meant to do watch repair. They will not go typically low enough voltage sometimes a well. They typically go way too high and voltage. Plus they have way too much power out and if you short the leads together you'll have smoke and fire. None of which are nice to have on the watch bench.

 

 

  • Thanks 1
Link to comment
Share on other sites

Here is my power supply.  I use a 9V battery inside the box.  The circuit in this box is different than the one posted above.  The box is a stock box, but the front plate was 3D printed.  I had the 10-turn pot in my box-o-parts, so I used it, but it could be a standard pot.

2022-08-02 07_13_32-20220802_071211.jpg ‎- Photos.png

Here is a tighter layout...just because...

The dots are 0.1 inch spacing.

2022-08-02 07_34_07-ExpressPCB - F__Documents_Docs_Engineering_2016_Projects_LM20 power supply.pcb.png

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

1 hour ago, LittleWatchShop said:

Here it is...working.  There is a mistake in the pcb layout.  I cannot believe it. What a dip***t mistake.  Who can find it?

 

2022-08-10 15_10_29-20220810_150733.jpg ‎- Photos.png

I don't know if it's a mistake, but I would have reversed the top and bottom layers of the tracks for easier soldering.

Link to comment
Share on other sites

On 8/1/2022 at 1:42 PM, markr said:

Sorry for late response.  My computer is f upped and wont let me download photos.  Will this meter work and can I build the power supply in it?  Is the power source a 9v battery?  What controls the voltage amount?  I think that I can build it with a little help.

IMG_5167.JPG

IMG_5168.JPG

If you want to build the LM10 supply, I will send you the PCB.  You can order the LM10 from a variety of places and the digital meter also if you wish to use it.  The 5K pot is also available at Jameco

Edited by LittleWatchShop
Link to comment
Share on other sites

23 hours ago, LittleWatchShop said:

No, that is not it.  These are plated through holes (vias), so soldering from either side works just fine.  There is a more fundamental error.

So what's the mistake?

The solder pad of R1 looks strange and the alignment of the holes of C1, R1 are not in a straight line. I don't know what the underside looks like but it doesn't seem to follow the PCB plan.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • in general this shouldn't be any change. but in general questions like this it be nice to know the specifics of the watch in other words how was it performing before it was cased up and what is it doing now.
    • just as a reminder this watch is a Swatch group product. This will bring up a problem like spare parts and technical information. that I found some links to some information on when I talk about your watch and some of the technical and basically your watch is equivalent to 2834-2 for which I'm attaching the technical sheets. But equivalent does not mean exactly the same you want to do a search on the group for C07 as we discussed this watch before including the technical differences how it's supposed to be regulated and basically because it's watch group there is no parts availability. https://calibercorner.com/eta-caliber-c07-xxx/   https://www.chrono24.com/magazine/eta-movements-from-the-2824-2-to-the-powermatic-80-p_80840/ https://www.watchuseek.com/threads/h-10-movement-details.4636991/ eta CT_2834-2_FDE_481857_15.pdf
    • people be honest.... Swatch is evil for the watchmakers and repairers, BUT not everything in watches from Switzerland is from the Swatch-Group. As far as i know, Selitta got sacked by Swatch as a Movement-Assembler for them and they started to produce Movements in their own Name with slight Modifications. As far as i know, they sell Parts to the Market for their Movements. In most cases, if a ETA-Movement fails, it is a valid Option to replace it with a Selitta Movement, which i consider the Solution for this Mess with the Swatch-Group...... I have no Connection to anybody at Selitta, but being a Swiss-Guy, i still like to have Swiss-Made Watches, but not from the Swatch-Group.   ok ? regards, Ernst
    • Just one more greedy act by Swatch. They started a number of years ago here in the US..cutting off supplies to watchmakers that could build complications that many Swatch houses couldn't even touch. Old school masters who had gone through some of the most prestigious houses in the world. Otto Frei has some statements on their page about it. I tell all my customers to avoid new Swiss watches like the plague,..unless they just want an older one in their collection that still has some parts out on the market, or they have really deep pockets and don't mind waiting months and paying through the nose to get it back. Plenty of others to choose from..IE Seiko,..or other non-swiss brands Even a number of Chinese brands are catching up with the Swiss,..and I think that in time, their actions will be their downfall
    • Yes. If that's not what you are experiencing...start looking for something rubbing. A 1st guess is that one of the hands is rubbing against the hole in the center of the dial. Especially if you now have lower amplitude in face up/ face down positions.
×
×
  • Create New...