Jump to content

New Swede over here!

SwitchAndLever

By SwitchAndLever
in Introduce Yourself Here

 Share

Recommended Posts

SwitchAndLever New Member

SwitchAndLever

Posted
Posted

Hi there! I'm new to the hobby, though my dad was an avid collector of pocket watches for many years, unfortunately I sold probably 90% of his collection after he died. Now I'm taking my first careful steps into it myself after itching to do something practical with my hands as I await to open my own metal and woodworking workshop.

I refound the hobby due to binging videos from the Wristwatch Revival channel on YouTube, and felt like it would be interesting to take a crack at all this myself. I also run the Switch & Lever YouTube channel, where I do all sorts of projects in wood, metal, 3d printing, programming, electronics and much much more. Not going to drop a link, as I don't want it to be seen as spamming, but it's easy to find with google 🙂

Hope to learn a lot from all of you! I'm about to post a watch I just picked up at a flea market today, to seek some helpful tips and tricks on how to go about it, and how to identify the movement. 

All the best!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • nevenbekriev
      Pocket watch escape wh

      By nevenbekriev · Posted

      Yes, it looks like GT Revue 30. Doctor, You can not replace escape wheel by the dimensions You listed. One needs to know much more things like number of leaves of the pinion and it's diameter, the position in high of the table and the pinion, the hight between the pivots, the exact pivots diameter... And then, even if suitable wheel is found, one will need to know how to adjust the pallets position correctly. Restoring antique movements is something different than replacing parts. In older movements parts are not interchangeable, this means spare parts do not exist. Here the case is different, but still escapement adjustment will be needed if a wheel from a donor is found. So may be it will be easier to restore the donor for You...Restoring antique movements usually means making of the parts needed and this requires knowlage and working on lathes skill. In this case repivoting of the wheel is the natural solution, but there is a long way that one must walk untill getting ready for such work.
    • Waggy
      How to store one dip

      By Waggy · Posted

      I was looking at Essence of Renata, a chemical used a lot for cleaning hairsprings: "Specially prepared solution for degreasing watch and instrument components. Indispensable for degreasing hairsprings." Looking at the MSDS you can see this is just pure n-Heptane, so could be an option for those who don't want to use the chlorocarbons or hexane?     HF6013 - Horological Essence COSHH Safety Data Sheet Horological Essence_0.pdf
    • Kkramme
      Self introduction

      By Kkramme · Posted

      Great!! 👍 
    • Waggy
      Self introduction

      By Waggy · Posted

      Welcome from a fellow Seiko enthusiast, there are lots of us on this forum.
    • Mercurial
      Pocket watch escape wh

      By Mercurial · Posted

      Nickelsilver is right, movement diameter and keyless works ‘fingerprint’ are important for identifying movements. That said, this appears to be a 7 jewel version of the a Revue 30 movement.  A quick search with google turns up parts movements, and individual parts should be quite easy to come by.  Hope that helps, Mark
×
×
  • Create New...