Jump to content

Elma Watch Cleaning Machine

SSTEEL
 Share

Recommended Posts

bobm12 Distinguished Member

bobm12

Posted
Posted

Sure, Andy, although I use a cheap ultrasonic machine, I understand it is all the same. I would recommend the L&R ultra thin and their rinse which has given me excellent results so far. Of course, others with the same type of machine as yours may have a better suggestion. You will end up with plenty of options I'm sure.

 

Cheers,

 

Bob

Link to comment
Share on other sites
  • Replies 637
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

LittleWatchShop
LittleWatchShop

I didn't get it. I am on a Levin lathe binge. Turning my small fortune into a smaller one

SSTEEL
SSTEEL

Its ok now, I have source one, should anyone else need a copy drop me a pm.

SSTEEL
SSTEEL

Had a few messages about the wiring diagram, so uploaded it for all to see..   super elite wiring diagram by Micky.!, on Flickr

Posted Images

Andyclient Super WRT Addict

Andyclient

Posted
Posted

Sure, Andy, although I use a cheap ultrasonic machine, I understand it is all the same. I would recommend the L&R ultra thin and their rinse which has given me excellent results so far. Of course, others with the same type of machine as yours may have a better suggestion. You will end up with plenty of options I'm sure.

 

Cheers,

 

Bob

Thanks for that Bob

  • Like 1
Link to comment
Share on other sites
chadders1966 WRT Addict

chadders1966

Posted
Posted

Good job, looks great. I don't know if you are aware but one tip I only picked up myself recently is that the first jar with the cleaning fluid needs to be spun not too fast. Apparently you need to avoid any bubbles/foam - I'm not entirely sure of the reason, but I read it in two different sources, one of which is advice on using cleaning machines in a book. Anyway I tried it (after having been spinning fast) and sure enough it did a better job. Apologies if you already knew this.

Stephen

Link to comment
Share on other sites
DJT2 WRT Addict

DJT2

Posted
Posted

Good job, looks great. I don't know if you are aware but one tip I only picked up myself recently is that the first jar with the cleaning fluid needs to be spun not too fast. Apparently you need to avoid any bubbles/foam - I'm not entirely sure of the reason, but I read it in two different sources, one of which is advice on using cleaning machines in a book. Anyway I tried it (after having been spinning fast) and sure enough it did a better job. Apologies if you already knew this.

Stephen

Thanks, great tip. I didn't know that & kept meaning to ask the question.
Link to comment
Share on other sites
chadders1966 WRT Addict

chadders1966

Posted
Posted

What cleaning solution are you using I have used Elma & L&R & never seen foam.

I use L&R Extra Fine and it always foams/bubbles if spun fast. I'm certainly no expert but I would assume this is normal, particularly as they sell another version called "No Fome" watch cleaner.

Link to comment
Share on other sites
bobm12 Distinguished Member

bobm12

Posted
Posted

Hi rogart, I'm located in USA where there are a couple of suppliers that sell L&R. I get mine from ofrei, but esslinger sells them too and maybe others (a couple dollars more but may be better for export if allowed). I understand cousinsuk also have them but haven't really checked.

 

Cheers,

 

Bob

  • Like 1
Link to comment
Share on other sites
rogart63 Distinguished Member

rogart63

Posted
Posted

Hi rogart, I'm located in USA where there are a couple of suppliers that sell L&R. I get mine from ofrei, but esslinger sells them too and maybe others (a couple dollars more but may be better for export if allowed). I understand cousinsuk also have them but haven't really checked.

 

Cheers,

 

Bob

Looked on Cousinsuk but could found it . Maybe i will have to look again . Ofrei is to expensive for me to order from . Esslinger is a good dealer . i will check it out again . Thanks bobm12

  • Like 1
Link to comment
Share on other sites
cdjswiss WRT Addict

cdjswiss

Posted
Posted

Looked on Cousinsuk but could found it . Maybe i will have to look again . Ofrei is to expensive for me to order from . Esslinger is a good dealer . i will check it out again . Thanks bobm12

Cousins do have L&R

 

https://www.cousinsuk.com/category/watch-cleaning-rinsing-rust-removing-fluids

 

But they will not deliver by mail to CH, maybe not to Europe either.

Link to comment
Share on other sites
chadders1966 WRT Addict

chadders1966

Posted
Posted

Hi,

Drifting slightly but relevant I think. I have noticed in various photos and descriptions of machines inserts in the jars, called wave breakers by some. From what I've read they are there to disrupt the whirlpool effect created by the basket spinning, and also to help pull the dirt away from the centre. They sometimes look like mesh around the edge of the jar, or very similar to pastry cutter star shapes on the bottom or sometimes just pieces of metal inside the jar. Does anyone have any information about them? Any photos? Where to get them? How to make your own? Thanks.

Stephen

Link to comment
Share on other sites
Rafal WRT Addict

Rafal

Posted
Posted

Jar belongs to Elma Super Automatic which I acuired recently, its in very good shape, all functions are working fine. Im looking for service manual in English, I received one from Elma but its in German which I dont speak...

post-1017-0-48339900-1430762076_thumb.jp

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • watchweasol
      Without Our Forum

      By watchweasol · Posted

      Hi guys, the question is what is a forum, a place for discussion and passing on information, idle chat and a bit of fun and I for one are the richer for it. When in Hospital last year with the Covid being force fed oxygen and feeling total sh1t and close to the pearly gates a daily look on the forum to see what was going down helped to keep me focused on the job in hand took my mind off the problem for a short while but it was a lifeline for sure. We chat to friends for that is what they become around the world read their posts help where we can post information where we can.  I like @Neverenoughwatches some times think of members past and wonder if they are still at the watches or given up, some drop in for advise and drop out again never to be heard of again. The forum reminds me of Yorkshire hospitality, The door is always open and the kettle on the stove. Long may it continue.   My two bobs worth.
    • KenD
      Main spring

      By KenD · Posted

      Thanks all.   Movement is a Helvetia 800C. Don't know any history e.g. if the broken mainspring is original. Watch was bought recently as non-working. Really interesting piece that Jon, thanks. I'd only been thinking of length relating to power reserve. I don't have a mainspring winder (yet) so I'd like to avoid winding the spring into the barrel by hand. The old spring measures at 1.60 x .11 x ~290. Sorry, can't be exact on the length. The piece I still have is 275, but the second piece escaped during measurement. Best measurement I had for it was ~13. The micrometer does zero accurately so I'm pretty confident of the .11 Also, I'm getting the barrel ID at 9.5 on a vernier. I'm now wondering about going with a .11 spring? Given all of the above, maybe 1.60 x .11 x 300 x 9? Any thoughts? Cheers.
    • VWatchie
      Without Our Forum

      By VWatchie · Posted

      Funny that you should bring this up. I was thinking about it just the other day. What happens if something happens to @Mark? The social bit is fantastic and I would miss it dearly, but I worry even more about the content. Together we have created a gold mine of information which would be more or less irreplaceable if the site should disappear. People (often with a lot of knowledge) come and go. I sometimes wonder what happened to them and miss them. We have no idea unless we have some private contact information. When I was new here I saw a lot of posts by @Lawson. He had a true fire in his heart for horology and was asking for an apprenticeship in his signature. I found that very inspiring and often wondered what happened. Is the fire still burning? Did he get an apprenticeship?
    • clockboy
      Intro

      By clockboy · Posted

      Welcome to the forum, enjoy.
    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      I dont like to give up things that i enjoy Tom.  So my next question is how are we going to prepare for that inevitability and what are we going to do about it. Its not just about funding it but I did pick up on something that Mark said once. It doesnt run on fresh air , what if it becomes a burden or an unnecessary cost or for any other reason that i wont get into. We all know life can change in an instant, my life has been so up and down for about 8 years and was only just beginning to level itself out. 
×
×
  • Create New...