Jump to content

Janta / Pearl Watch Cleaning Machine


Recommended Posts

Hello Everyone

 

I have been looking for a watch cleaning machine here in the U.S. and i am not finding any used Elma machines

but i did run across the Janta Machine. It is a seller in New York who sells them, i talked to him over the phone and he said that they perform very well and he has sold a lot of them. He is getting some more in Stock in about 10-14 days

 

I was just wondering if anyone here in the US has used them, and will they perform well in the long run?

i would probably use it once a week, for i don't have that many cleanings right now.

Any info would be greatly appreciated. Here is a link to the seller in the US

 

http://www.tuxedonyc.com/files/TX268.html

 

thanks for taking the time to read this

 

 

p.s. This seller has it marked for $449.99 + Shipping

which is much lower than the ebay prices that i have seen

~Omar

Edited by OmarHaltam
Link to comment
Share on other sites

I think our Lawson (check out the walkthrough section) has one and he even posted some pictures of it in his Seiko 7S26 walkthrough. I believe he talks favorable about them.

 

My own opinion is that you should look up PEARL which is the direct distributor from India...Also, they offer it for half the price you were quoted...If I'm not mistaken.

 

http://www.sunrise-exports.com/watchtools/equipments_machinery.html

 

http://www.shafatools.com/products.php

Link to comment
Share on other sites

Hello Everyone

 

I have been looking for a watch cleaning machine here in the U.S. and i am not finding any used Elma machines

but i did run across the Janta Machine. It is a seller in New York who sells them, i talked to him over the phone and he said that they perform very well and he has sold a lot of them. He is getting some more in Stock in about 10-14 days

 

I was just wondering if anyone here in the US has used them, and will they perform well in the long run?

i would probably use it once a week, for i don't have that many cleanings right now.

Any info would be greatly appreciated. Here is a link to the seller in the US

 

http://www.tuxedonyc.com/files/TX268.html

 

thanks for taking the time to read this

 

 

p.s. This seller has it marked for $449.99 + Shipping

which is much lower than the ebay prices that i have seen

~Omar

It looks very much like an Elma (which I think Mark uses). I purchased & had re-furbished an L&R a couple of years ago & could not do without it now.

In my opinion if you can afford it and have the room go for it.

Link to comment
Share on other sites

According to Elma the Pearl Janta is a rip-off, there was no licenced replica from India. I just got my Elma Standard from 1971 today. Searched for it for almost a year, but it is worth to wait, as this was now a bargain.

Edited by Cougarnaut
Link to comment
Share on other sites

so could I have two beakers or jars with lids, fill them with watch cleaning solution and stick them in my Elma ultrasonic for cleaning.

I use a plastic tray for large parts and a mesh "thimble" for small ones.

P1292185.JPG

Quick and and easy.

Link to comment
Share on other sites

I like the way you marked the different sections  :)

I am thinking of trying the ultrasonic cleaning method since i have one on my desk running all the time.

I am going to order the bergeon 16mm and 23mm baskets and try that method.

i like the white tray in the picture, is that from a jewelry cleaner basket or bought separate?

thanks

Link to comment
Share on other sites

i like the white tray in the picture, is that from a jewelry cleaner basket or bought separate?

Yes, cheapie from Cousins. Parts removed which are large enough go straight into it, and back.

I think that good watchmaking is more like practicality and efficiency than a parade of tools and equipment.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • people be honest.... Swatch is evil for the watchmakers and repairers, BUT not everything in watches from Switzerland is from the Swatch-Group. As far as i know, Selitta got sacked by Swatch as a Movement-Assembler for them and they started to produce Movements in their own Name with slight Modifications. As far as i know, they sell Parts to the Market for their Movements. In most cases, if a ETA-Movement fails, it is a valid Option to replace it with a Selitta Movement, which i consider the Solution for this Mess with the Swatch-Group...... I have no Connection to anybody at Selitta, but being a Swiss-Guy, i still like to have Swiss-Made Watches, but not from the Swatch-Group.   ok ? regards, Ernst
    • Just one more greedy act by Swatch. They started a number of years ago here in the US..cutting off supplies to watchmakers that could build complications that many Swatch houses couldn't even touch. Old school masters who had gone through some of the most prestigious houses in the world. Otto Frei has some statements on their page about it. I tell all my customers to avoid new Swiss watches like the plague,..unless they just want an older one in their collection that still has some parts out on the market, or they have really deep pockets and don't mind waiting months and paying through the nose to get it back. Plenty of others to choose from..IE Seiko,..or other non-swiss brands Even a number of Chinese brands are catching up with the Swiss,..and I think that in time, their actions will be their downfall
    • Yes. If that's not what you are experiencing...start looking for something rubbing. A 1st guess is that one of the hands is rubbing against the hole in the center of the dial. Especially if you now have lower amplitude in face up/ face down positions.
    • Once a movement has the dial and hands put back and it is recased, would you expect the assembled watch to have the same amplitude as when the movement is in a movement holder and is without hands and dial? Thanks
    • C07641+ not sure what the "+" is for after the last digit.
×
×
  • Create New...