Jump to content

A Big Fat Thankyou


Maurice

Recommended Posts

I would like to give a big THANKYOU to GEO for making me this lovely bow for my recently acquired jacot tool Also thanks to Marc for the heads up. This really is the best watch forum on the planet  :thumbsu:

post-89-0-71509100-1430045795_thumb.jpg

Made to fit the case.. What a Gent, Thankyou once again! :bow:

  • Like 3
Link to comment
Share on other sites

This really is the best watch forum on the planet  :thumbsu:

 

Definitely an amazing one! Our plans for WORLD DOMINATION are panning out! :D

Nice of you Maurice! And thank you for the pic. Now you got quite a tool there!

 

@Geo: That is a very classy bow there Geo. I feel like thanking you for the nice gesture and it is not even for me!

 

PS. Do you actually need a lathe for the Jacot tool? Sorry for my ignorance but I've never used/had one...only seen a couple of pics/videos. Never the whole process/set up, etc.

  • Like 1
Link to comment
Share on other sites

Do you actually need a lathe for the Jacot tool? Sorry for my ignorance but I've never used/had one...only seen a couple of pics/videos. Never the whole process/set up, etc.

No Bob, the Jacot tool is actually a small specialised lathe itself made for the final sizing and burnishing/polishing pivots.

You can get a safety driver for fitting into the headstock of a watchmakers lathe and a Jocot drum to fit the tailstock. To use it, the headstock spindle has to be locked and a bow used to turn the wheel and pinion in exactly the same way as a the one that Maurice has just purchased.

Link to comment
Share on other sites

Thanks Geo, if it is not much to ask, do you have pics that illustrates your explanation. I'm having trouble picturing this in my head, the whole set up. I'm myself starting to think I may want to have one too since the lathe is not required! :)

 

Cheers,

 

Bob

Link to comment
Share on other sites

Thank you Maurice, interesting video and to the point. I would also like to see the whole set up and how to fix it to the bench if necessary...just to have an idea of what to buy (something that's ready to go for my first pivot).

 

Cheers,

 

Bob

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Getting back to the issue which is us guys repairing or just enjoying horological exploits. The big worry now is how sound is Cousins as company going forward. The of cost if this 8 year legal battle will be astronomical. Cut backs will happen noticed already how the Cousins catalogue is half its size this year. The main supplier going out of business will hit the UK horological community in a big way.    On the Brexit issue it was about a sovereign country being able to make its own laws and trade with any country in the world. I cannot see what was wrong with this. For those who wish to re join the cost would be very high indeed.
    • Yes, it's the same (old) song and it's getting worse & worse;  
    • 🤔 leaving the EU meant that UK was no longer part of the convention and have already been turned down an independent reapplication. I'm pretty sure courts have to be held in Switzerland in this case. There will be a lot more watches stashed away in draws  tbh, folk wont be able to afford to maintain them. Cheap watches will be bought and top end watches by folk with plenty of cash that can pay for service and repair. The expensive once in a lifetime gifts and everything else inbetween will be at the forgotton when they stop working. I know i was being a numpty, get used to it 😄 Anybody that knows will boycott them, but besides repairers who will know. Nope will never buy one, i made that decision as soon as i learnt about this. 
    • although not in this case.  It was the Lugano Convention and its deficiencies that allowed a Swiss court decision in the first place.  This isnt really a Brexit issue at all.  A decision that affects both the EU and the UK should never have been heard in Switzerland. I bet the authorised service centres in the UK are pretty pleased.  It's a massive shame, though; I believe watch owners should be able to choose to have their watch serviced by whoever they trust.
    • Hi guys I think that old hippy is correct, it opens the gates for china to manufacture aftermarket spare parts. considering that they already do work on behalf of the Swiss I guess this decision gives the a little more legitimacy to tool up and I am sure they will take advantage of the situation either with or without the blessing of the Swiss watch industry  Having read about the protectionist machinations of the Swiss in the history of Europe they were the only ones to get fat at everybody else’s expense. I think the outcome could have been guessed at but ,  fair play to Cousins UK for standing up to them.  Now the question,  will everybody boycott Swiss watches and Swatch, no way they will still fill their coffers.  Me I stick with the Japanese once renowned for cheap shitty watches who came good through industrial effort and don’t for get the Russians that most dismiss as low grade crap. Wouldn’t buy a swatch product ever how about you all.? a
×
×
  • Create New...