Omega 1861 noise when shake

[Oyster]

I got the speedmaster replica 1957 in today and notice when shake or wind the movement raised a little, I open it up and Seem everything OK; it appears that the movement holder is a little loose, or something else?

[Plato]

Replica? 

[Oyster]

3 minutes ago, Plato said:

Replica? 

Yup! The 3 video also show the sound when chake

[Klassiker]

Take it back to the shop and get a refund.

[oldhippy]

Sorry to say because you have opened up the watch the guarantee is now none and void. Whatever you do  don't tell them you opened it up. 

[nickelsilver]

The cap that goes over the movement with the button in the center is supposed to make contact with the caseback, holding the movement and its ring securely once the back is tightened. It could be that it got pressed too far in the past, or is from a different model (?), and isn't contacting the back correctly. Obviously if the back isn't tightened securely it could be out of contact as well.

[Nucejoe]

1 hour ago, nickelsilver said:

The cap that goes over the movement with the button in the center is supposed to make contact with the caseback, holding the movement and its ring securely once the back is tightened. It could be that it got pressed too far in the past, or is from a different model (?), and isn't contacting the back correctly. Obviously if the back isn't tightened securely it could be out of contact as well.

The button can be punched in or out, just put the cap on top of a nut, say 1.5 cm inner diameter and punch the mid section of it out, it will self adjust as you tighten the back plate.

[Oyster]

18 hours ago, Nucejoe said:

The button can be punched in or out, just put the cap on top of a nut, say 1.5 cm inner diameter and punch the mid section of it out, it will self adjust as you tighten the back plate.

Works like a charm!! Thank you

[Plato]

On 7/30/2021 at 1:58 AM, Oyster said:

speedmaster replica 1957

I take it that this watch isn't a replica = fake? It is a genuine Omega '1957 Speedmaster' re-edition?