Jump to content

old clock. Is it authentic?


lamikam

Recommended Posts

I have had this clock sitting in my garage for 25 years. See lot of pics here https://imgur.com/a/rTykfRy It was my great-aunt's. I got it when she passed away. She had A LOT of really nice artwork, china. I know it is at least 60 years old and remember playing with it as a child. It is pretty beat-up. I have posted to some forums on reddit (r/clocks) and several people are thinking it a a 19th century from France. I cannot see any manufacturer's name/marking on it. I would like to know if it is authentic from the period, and not some replica, and if so, is it worth getting restored? Thank you!

20210725_140925.jpg

20210725_140942.jpg

20210726_203535.jpg

20210726_203628.jpg

20210726_203639.jpg

20210726_203659.jpg

20210726_203703.jpg

20210726_203707.jpg

20210726_203712.jpg

20210726_203721.jpg

20210726_203730.jpg

20210726_203809.jpg

20210726_215328.jpg

20210726_215338.jpg

20210727_160525.jpg

20210727_160532.jpg

20210727_160538.jpg

20210727_160542.jpg

20210727_160556.jpg

20210727_214617.jpg

20210727_214732.jpg

  • Like 1
Link to comment
Share on other sites

I have always known these types of clocks to be called ROTATING CIRCLE clocks. Certainly French it has a count wheel striking movement on a bell. Probably an 8 day movement or could be 14 day. At a rough guess Victorian but could be as early as late Georgian. I don’t need to tell you the whole movement and case is in one hell of a mess. It would look lovely restored. You will need to find a competent clock restorer not a clock repairer. 

I notice that this is you first post. We like new members to introduce themselves first before requesting help or advice. 

  • Like 1
Link to comment
Share on other sites

4 hours ago, oldhippy said:

I have always known these types of clocks to be called ROTATING CIRCLE clocks. Certainly French it has a count wheel striking movement on a bell. Probably an 8 day movement or could be 14 day. At a rough guess Victorian but could be as early as late Georgian. I don’t need to tell you the whole movement and case is in one hell of a mess. It would look lovely restored. You will need to find a competent clock restorer not a clock repairer. 

I notice that this is you first post. We like new members to introduce themselves first before requesting help or advice. 

OK Hi. Leor here from Atlanta GA, USA.  Know nothing about clocks just yet

Link to comment
Share on other sites

25 minutes ago, watchweasol said:

Hi and welcome to the forum, nothing to add that has not been said already but what a gem, It may be in a mess but restored what a beauty.  French with a spelter case.

I'm not so sure it is spelter. 

Link to comment
Share on other sites

2 hours ago, oldhippy said:

That is nice and in a different class to our friends. I hope he doesn't think his is in the same price bracket because it is not. That one will also have a glass dome for it. 

ALso most of the ones I have seen online have some sort of marble base.  I wonder if mine is missing that.  I did not see any mounting hole or bracket of some sort in the base

Link to comment
Share on other sites

8 hours ago, lamikam said:

OK I found a similar clock that was at auction - https://www.christies.com/en/lot/lot-4619095

Mine can't be that old, can it?

 

8 hours ago, lamikam said:

OK I found a similar clock that was at auction - https://www.christies.com/en/lot/lot-4619095

Mine can't be that old, can it?

It’s difficult to give an exact age but looking at the value of some of these clocks as OH has suggested this clock needs to go to a clock restorer who might also be able to give an approx value and its age.

Link to comment
Share on other sites

8 hours ago, lamikam said:

OK I found a similar clock that was at auction - https://www.christies.com/en/lot/lot-4619095

Mine can't be that old, can it?

As I have already said Victorian but could be as early as late Georgian 1830 to 1837 .  Queen Victoria reigned from 1837 to 1901. So yes your clock is that old. Don't be so surprised there are thousands of clocks that fit into that time period.   

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • So here is the new base (v 2.1), I made it so that the base will fit over and swallow the stump of the hand pusher tool (or at least my clone of the tool), I also reduced the OD of the bottom skirt a little as it looked/felt a little large, here are a few pictures and the fake .pdf file which you need to convert to .zip once downloaded.   The cut-out seen on the below image on the bottom of the base should swallow the OD (40 mm, +0.1 mm tolerance) of the stump and the height of the stump 9.5mm (measured to 9.1mm, but rounded to 9.5mm) - let me know if this works for your tool.   Note, I think you may need to print supports for the new internal shelf created? Modular Movement Holder.pdf  
    • Hi Frank, you have dived headlong into the deep end. Hairspring work has to be the scariest thing a newbie has to tackle. Your hairspring appears to be bent and just putting it back into the regulator would not allow the balance to work properly. It might start oscillating but the performance would not be good. The proper thing to do is to unstud the hairspring, remove the hairspring from the balance, reinstall the hairspring on the stud carrier, reshape the endcurve and centre the collet to the balance jewel hole. This challenge would either make you or break you. Hope that you will be able to fix your watch. Welcome to the world of watchmaking.  Watch this video. It think it'll give you an idea of the task ahead. From your 1st photo, I think you have a etachron type stud. Let me see if I can find a video on how to remove it from the arm.
    • Have read of the Tech Sheet attached on the balance section page 12. It may be bent but until you reposition it back in the regulator pins you'll never know. Cheers CJ 4R35B_4R36A.pdf
    • Aloha All, My Seiko 4R35B movement stopped working today. Upon closer inspection, it looks like the balance spring came out of the regulator pin. This is my first time working on a balance. Any advice on how to get this spring repositioned (back to normal)? I'm pretty sure that while adjusting the beat error on this movement, I must have turned the stud (I didn't even know they turned), and the spring eventually fell out.  Will the spring go back to even spacing when it's back in the pin, or does it look bent? Thanks, Frank  
    • Good job, that band matches the watch perfectly.
×
×
  • Create New...