Jump to content

Looking for history of Hampden watch company post bankruptcy (1927) in the 1940s and 50s.

Max50916
 Share

Recommended Posts

Max50916 Watch Enthusiast

Max50916

Posted
Posted

I just serviced this vintage (I think it's from the 1950s) 14k gold Hampden wrist watch. I was looking into their history and everything I found about them said that they went out of business around 1927 and sold everything to Russia. I know that there are other Hampden wristwatches from the 1940s and 50s (swiss made) but I can't find any further history. Was this brand trying to be revived? Movement is signed Hampden too, it's an AS 970.

PXL_20210723_152907232.jpg

PXL_20210723_152954639.jpg

PXL_20210720_194402609.jpg

Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted

 

On 7/23/2021 at 5:59 PM, Max50916 said:

I was looking into their history and everything I found about them said that they went out of business around 1927 and sold everything to Russia.

It doesn't cover your Swiss made watch or the Russian deal, but the early Hampden history is told in a book that you can download form the the internet.

The watch factories of America, past and present (1888).pdf

 

 

  • Thanks 1
Link to comment
Share on other sites
JohnR725 Distinguished Member

JohnR725

Posted
Posted

one of the things interesting with your watch is the letters found on the balance bridge? That's the US import code watches imported to the US were supposed to have a code of who imported them. so I have a link down there it tells us that XYV Hampden.

then for the second link for the as970 1935-1967, <16.000.000(all variants) that does narrow down a timeframe.

 

https://www.timeplex.com/pages/import-codes

http://www.ranfft.de/cgi-bin/bidfun-db.cgi?10&ranfft&0&2uswk&AS_970

 

On 7/24/2021 at 8:32 AM, jdm said:

The watch factories of America, past and present (1888).pdf

https://archive.org/details/watchfactoriesof00abbo

 

  • Thanks 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • VWatchie
      Epilame / Fixodrop

      By VWatchie · Posted

      Sounds great! And yes, I would use grease for the keyless as well although treating the parts with epilame would make the grease less likely to spread in the long run. Not critical but won’t hurt. My current strategy is to epilame treat all parts getting in contact with oil or grease.
    • Knebo
      Epilame / Fixodrop

      By Knebo · Posted

      Hello everyone, for what it's worth, here is my approach: 1. Escape wheel submerged in Epilame, then dried quickly with a hairdryer. Then the final tip of the pivots are cleaned by poking into pithwood. The logic being that the Epilame is removed at the intended contact point (to avoid any residue that may mix with the oil), but remains in the areas where oil is not supposed to spread to (further down the pivot towards the wheel). The escape wheel teeth also benefit from having Epilame to keep the 9415 in place.  2. I use a syringe to treat only the pallet stones. I suspend the pallet fork with some Rodico so that the stones hang downwards. I notably use a rather thick needle where a drop WON'T form, but rather where the Epilame liquid stays in the needle tip, which I then dip into the pallet stones. It requires some practice to get the right amount of Epilame into the needle tip, but it works for me now. This way, no drop will "jump" onto the pallet fork and potentially go all the way to the pivots.  3. I let the movement run for a few minutes without lubricating the pallet stones... to scrape off the Epilame in the intended contact "channel". Then I remove the balance again and lubricate the exit pallet stone with 3-4 successive drops. See the "channel" that forms on the pallet stone in the picture -- not so easy to see, but it's visible.       I am conflicted about the use of Epliame in balance jewel settings. My impression is that the two jewels sufficiently suspend the oil (even 9010). Apparently Rolex recommends NOT to use Epliame there (heard from a former Rolex service center watchmaker), as it could cause additional wear. Apart from that, I follow specific instructions where I can find them. E.g. the infamous Rolex reverser wheels or sometimes (parts of) the seconds wheel. Exception: I'm currently servicing an Eta 2824 and will probably ignore the service sheet that recommends treating the whole keyless works with Epilame and then using HP1300... I'll skip the Epilame and use 9504 grease.        
    • GuyMontag
      Movement holder made with 3D printer

      By GuyMontag · Posted

      I'm going to give this a try today/tomorrow on my UTC33/Seiko 66, thanks!
    • RichardHarris123
      Intro

      By RichardHarris123 · Posted

      Hello and welcome from Leeds, England. 
    • oldhippy
      Without Our Forum

      By oldhippy · Posted

      Don't forget Mark is a hard working watch maker so he is also tied up with work. I'm sure he is keeping his eye on this forum making sure it is running along nicely. 
×
×
  • Create New...