Jump to content

New Video. Setting A Watch In Beat.

Mark
 Share

Recommended Posts

WillFly Distinguished Member

WillFly

Posted
Posted

Excellent stuff there, Mark!

 

I did a no. 3 trim to the beard recently and brought it right down to whiskers - so you're now ahead of me in the beard length. Still, it's spring, and I expect a full growth from both of us in a few days more...

Link to comment
Share on other sites
Mark Distinguished Member

Mark

Posted
  • Author
Posted

Just clipped it all away. I am a strange fellow - if I close shave I end up itching all day, if I let it grow too long I end up itching. I usually clip with no attachment.

 

Will - you must feel bald at the moment!

Link to comment
Share on other sites
matabog Super WRT Addict

matabog

Posted
Posted

Great vid!

Not to be ungreatfull, don't get me wrong, I understand the long hours spent behind making these videos, but I am waiting for more advanced stuff! More like those two hairspring works you've done :)

 

For example: adjusting in different positions, centering the hairspring between the regulator pins,  static and dynamic poising, pivots streightening and polishing, pallet stones repair and adjustement  :)

 

Again, thank you very much for your work spent doing these videos!

Bogdan

Link to comment
Share on other sites
Mark Distinguished Member

Mark

Posted
  • Author
Posted

Great vid!

Not to be ungreatfull, don't get me wrong, I understand the long hours spent behind making these videos, but I am waiting for more advanced stuff! More like those two hairspring works you've done :)

 

For example: adjusting in different positions, centering the hairspring between the regulator pins,  static and dynamic poising, pivots streightening and polishing, pallet stones repair and adjustement   :)

 

Again, thank you very much for your work spent doing these videos!

Bogdan

 

:) I understand - I have had a huge amount of requests for regulating and timing machine content.

So it is good to create a mixture of basic and advanced content but at the moment I am doing a series on the basics and will work up from there because it is laying foundations for some of the examples you would like to see.

 

I really appreciate the feedback Bogdan :)

  • Like 2
Link to comment
Share on other sites
clockboy Distinguished Member

clockboy

Posted
Posted

"Normal haircut"... :D

 

Twice a year for me - and sometimes three if the weather's exceptionally warm.

Mine is a race between going bald or silver, the baldness has been accelerated after tackling hairsprings & crawling around the floor looking for lost parts.

Link to comment
Share on other sites
Rob WRT Addict

Rob

Posted
Posted

Good video as usual, and nice animations. :)

 

What I miss though is an explanation of why it's good to be in beat. It's not obvious to me why being out of beat would necessarily be a bad thing. The balance wheel still oscillates with the same frequency.

 

I have read that being out of beat affects the rate in different positions and that makes some sense. But I've also heard that it will make it harder for the balance wheel to start up and that it decreases the amplitude by wasting power… 

Link to comment
Share on other sites
cdjswiss WRT Addict

cdjswiss

Posted
Posted

Splitting hairs, I have a remark on this excellent new video.

My attempts at setting beat with the stud movement puts the watch out of time. So I readjust the curb pin setting using the timing regulator and this invariably results in a new, but smaller, beat error. After some iterations I can usually arrive at a watch in beat to within a few tenths of a ms and timing good to second/day. But it always needs three or more iterations. Is this normal?

Link to comment
Share on other sites
clockboy Distinguished Member

clockboy

Posted
Posted

As I understand it a low beat error is important when the watch mainspring winds down, but in a auto watch it is not such a issue.

I could be wrong but also if out of beat in certain positions the out of beat would become an issue.

I don,t understand how by altering the curb pins I can change the beat or am I missing something.

Link to comment
Share on other sites
Mark Distinguished Member

Mark

Posted
  • Author
Posted

Two potential problems if a watch is not in beat: Beat error can possibly cause positional error in vertical positions. The watch may require agitation for it to start because the impulse jewel is not in the correct position. A watch wildly out of beat may be difficult to start or may stop intermittently. You may have amplitude problems.

But yes, you are correct. The overall time it takes for an oscillation should remain constant.

A goal would be to keep beat error to under .5 milliseconds.

Link to comment
Share on other sites
 Share
Go to topic listing


  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • HectorLooi
      Without Our Forum

      By HectorLooi · Posted

      Like losing Ranfft. That was a wake up call. We took his website for granted. Miss him terribly.  
    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      Its 4 o'clock in the morning here in the Uk, i cant sleep, i dont sleep, not much ever really. My brain never shuts off to rest, I'm just a constant thinker, i have to be very tired to be able to sleep,  i guess eventually it will be my undoing and my health will suffer because of it I'm sure. But while I'm here i want to get as much out of life as i can, and give as much as i can, to help,maybe to make a difference to someone's life if that is within my capability,recent events have made that need even more clear to me. I'm not sure where I'm going with this or why i bring it up , or if its relevant to want i want to talk about its just in my head right now. What i do want to talk about is something thats been on my mind for ages. I like to be prepared,  I'm not fond of surprises because surprises take control away and i am a bit of a control freak at times. This forum, Our Forum if i can call it that, is here because of two reasons. The guy that created it and keeps it funded and the people that joined it.  Without either, it would not exist, and lets face it one day it won't ( I'm a realist and i talk about things others dont or who are afraid to in other words folk that dont particularly prepare for the inevitable). How many of us visit here regularly ?  How many among us almost depend on the forum as a way of socialising because they are stuck at home and how many of us has it become part of a daily routine to check in and see if they can offer advice or get help with something they are working on or just to have a chat and engage in some banter. The members here are in the thousands and thousands have disappeared over the years many had just a fleeting visit. But there are a good few of us that know each other quite well and visit regularly. I dont know about you but i wouldnt want to lose that communication with you all, in all honesty it has become an important part of that side of my life and helps to feed my passion for all things watches. Some of you may think differently and thats ok, some of may stop and think # what would i do " Without Our Forum " # 
    • Neverenoughwatches
      Gamblin Gamsol for cleaning?

      By Neverenoughwatches · Posted

      Naptha appears to be a general name and its content can be varied depending upon what it's specific use is. Lighter fluid as an example can be light or heavier also with other ingredients to help it burn. Try sesrching for benzine ( as opposed to benzene which is linked to causing health issues ) . There are other fluids such as ethanol that you could try and also methylated sprirts, mostly ethanol with a small percentage of methanol added. Experiment with any new chemical to see how quickly schellac dissolves in its presence. I have tried a few things but hexane is not one of them, i understand it does evaporate very quickly.  Be sure sure to check out any safety data on chemicals you try. Toxicity of fumes and flash point information, ultrasonic machines can heat up fluids even without a heater function. And of course always ask here for personal opinions when trying a new substance. 
    • GuyMontag
      What tools does ebay have to offer this week.

      By GuyMontag · Posted

      I have that set and really like it. I prefer that crystal holder over the one that came with my Bergeon claw tool and any time I use the claw I use this one instead of the Bergeon one, just an additional bonus with this tool.
    • GuyMontag
      Movement inserted from crytal side

      By GuyMontag · Posted

      Is the Roamer not a split stem? I'm confused on your how your case is put together. If it is a front loader where is it you are putting the case screws? I love me some Roamer, do you have any photos?
×
×
  • Create New...