Jump to content

What tool is this? HR curved tweezer with groove?


Recommended Posts

Hi friends - Acquired this tweezer with a unique shape and a parallel groove/slot running the length of both sides the tip (~10mm) Made by HR (Hammel Riglander), but cannot track down what these are for. Thanks in advance. See pics.

- Mike

20210624_151408.jpg

20210624_150857.jpg

20210624_150905.jpg

20210624_150930.jpg

Link to post
Share on other sites

I LOVE THIS FORUM!!  I LOVE THESE EXPERTS!!!!

When I saw this post, some neuron started bouncing around in my head.  Wait!!  I have seen this.  YES...part of my inheritance.  Now I know what they are for.

2021-06-24 19_14_26-Photos.png

2021-06-24 19_14_14-Photos.png

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    No registered users viewing this page.

  • Topics

  • Posts

    • I bought this for my new watch bench. It is nice but because of the way you work on a watch bench, the lamp is mounted on the same plane as your work space (this is higher than if it were a typical work bench).  As a result, the lamp cannot pivot upward enough to get optimal positions. So, what I had to do was design and print an short extender that pushes the fulcrum of the lamp away from the manufactured pivot point.  This allows me more range of motion. I am pretty happy with how it turned out.
    • This purchase must qualify:
    • Please keep us posted though. It's a beautiful clock and well worth a bit of time and effort to get it back to it's original glory. Good luck!
    • Did a bit more today on my Hettich. I also mucked around with practising on the top plate from the second Hettich that I bought. The calico wheel can leave marks and I am being gentle. I am certainly not pushing the plate into the wheel. I could easily stall the bench grinder that I am polishing on. I am wondering if Hettich started to use a lower grade of brass? I still cannot polish the brass to a mirror finish. On my Hettich (older) I have had to emery one of the posts that supports the movement and after 600 grit then 1500 grit, straight to Tripoli on my stitched wheel, then green on the calico wheel and the post is spotless. Absolutely gleams. post has a steel nut on the top of it that was rusty and affected by the battery acid. It is now polished as best as can be done and then I mucked around with a bit of heat and have changed the colour of the nut which looks quite good now. It was black originally. I have done several jobs now by hand where a having a lathe would have been so much quicker. Have to get rid of the Esprit first. Then I might have a chance.
×
×
  • Create New...