Jump to content

I didn't say anything because I wasn't sure....


Recommended Posts

But after rupturing (read completely tearing in two) the main tendon between my right bicep and my forearm bone, I am in surgery this Friday and then 6~8 weeks for recovery. I cannot use my arm for just about the entire 6~8 weeks. That's no driving. I can't even use my hand to type.

I don't have the option of waiting a month to see how things go and then go for surgery as the tendon begins to scar. They are already saying that I am on the edge of the timeframe to get it done.

Yeehah............. 😞 

Edited by Michael1962
  • Sad 1
Link to comment
Share on other sites

Good luck @Michael1962.

A few years ago I ruptured my ACL and had to have surgery to remove a hamstring and use that to repair my ACL.  I wasn't allowed to put any weight on my leg for 6 months.  After 6 months I had lost all my muscle mass and wasn't able to support my own body weight.  But another 6 months later I ran a half marathon!

It's a long hard road to recovery but you can do it.  Don't despair.  Use your downtime wisely.  Don't turn to alcohol.

Link to comment
Share on other sites

I don't drink much since I had a stroke in Nov 2014. I now take a pain medication that does not play well with alcohol.

I am not super positive about all the restrictions that will be imposed on me after the surgery, but I have been told that I am not to even support my arm on a desk and type straight after. I understand what they are going to do, just not sure of the restrictions that I will be under.

Difficult when I am a righty as well.

Link to comment
Share on other sites

  • 5 months later...

Having had 3 rh shoulder repairs and amputating most of the top of my rh middle finger Life as a lefty is difficult for a few weeks. Pain will be your guide for the first couple of weeks.

Its uncomfortable and an embuggerance, but necessary to get your arm function back, DONT do anything stupid.

Tendons have a very limited blood supply and that is why they take so long to heal.

Listen to the physios and follow their instructions.(evil sadistic bitchs all of them)

A great guide to the fact that you are healing is when you get to use your master hand to wipe your bum and brush your teeth with minimal pain (not at the same time).

Then you have the exercises to rebuild your arm strength.

Good luck with it all, dont rush it, Doctors abhor warranty work and you have to start over.

Stay positive.

Cheers

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I'm assuming that every time you set the watch you are work hardening the detent spring, maximum hardening is  where it meets the plate due to maximum deflection.   That's why it snaps there.  The Young's modulus may be the same but after it's reached its maximum yeid strength it breaks.  My mechanic engineering is very rusty, correct me if I'm wrong. 
    • Ah ok yes that makes sense to polish it where the arm starts to form from the body of the bridge, i thought you meant the underneath of all the arm.
    • this is something I've never quite understood about the some of the Swiss companies. In 1957 Omega was using 9010 for the keyless parts with epilam. there's been a slow migration towards using heavier lubrication's but still typically oils and epilam to keep them in place. When it seems like 9504 works so much better.  
    • OK, welcome in the world of alarm clocks... I guess the 4th wheel is dished because it is from another movement. If it was not dishet, then it would not mesh with the pinion of the escape wheel, am I right? The marks of wear on the 4th wheel pinion doesn't corespond to the 3th wheel table position, at list this is what i see on the picts. Calculating the rate is easy - there is a formula - BR = T2 x T3 x T4 x T5 x 2 /(P3 x P4 x P5) where T2 - T5 are the counts of the teeth of the wheels tables, and P3 - P5 are the counts of the pinion leaves. Vibrating the balance is easy - grasp for the hairspring where it should stay in the regulator with tweasers, let the balance hang on the hairspring while the downside staff tip rests on glass surface. Then make the balance oscillate and use timer to measure the time for let say 50 oscillations, or count the oscillations for let say 30 seconds. You must do the free oscillations test to check the balance staff tips and the cone cup bearings for wear. This kind of staffs wear and need resharpening to restore the normal function of the balance.
    • Glue a nut to the barrel lid, insert a bolt, pull, disolve the glue.  Maybe someone will have a better answer. 
×
×
  • Create New...