Jump to content

Watch in the pool ?


Recommended Posts

So ladies and gentleman, i recently bought myself a vostok amphibia 420059 which is still on it's way hence there is not picture. I'm going on vacation soon and wanted to bring the watch with me. I've never worn an automatic in the pool/sea, except a casio quartz movement. I know the casio can take a beating and it's only a 30 euro's but i'm asking you professionals if it is a good idea to take my watch in the pool and if i need to do something after swimming (rinsing the watch with water) ? I loved to hear so i can enjoy my watch for a long time! 

Link to comment
Share on other sites

Scuba dude!

These watches are meant for being thrown around.  Enjoy it.

Before getting wet, always check that the crown is screwed down.  After being in the sea or a pool, run it under the tap to wash away any sand and chemicals.  It's also a good idea to turn the bezel a few times to release anything stuck under there.  Then towel dry it and leave it somewhere warm to evaporate any excess water.

Enjoy your holiday.

Link to comment
Share on other sites

Even the best quality diver watches are only secure if they have been regularly serviced with new seals fitted. Another mistake which is common wearing them in the shower or bath the hot water just creeps in. I know because my son did exactly this with his Breitling, luckily he knew someone who could fix it 😀😀.

Link to comment
Share on other sites

2 hours ago, Len33 said:

NO WATCH is "waterproof,"

not entirely true one of the early LED watches known as the SYNCHRONAR 2100 RIEHL SOLAR was hermetically sealed. there's a link below that talks about the watch it unfortunately doesn't have the best picture of the module. the second link seems the missing it's taxed but does show pictures of the module. So basically the entire module is sealed up it's probably the closest I would know to anything that is waterproof. Unfortunately because that is sealed the rechargeable batteries go bad with time and your watch is now worthless.

https://anachronar.wordpress.com/2018/06/04/its-back―a-review-of-the-synchronar-2100-mk-iv-and-a-half/

http://www.crazywatches.pl/synchronar-2100-riehl-solar-led-1974

 

On 6/11/2021 at 8:20 AM, Corstjens1 said:

casio can take a beating

yes but it's not a Timex. You want to look at the early Timex advertisements like this one you will note he ask he uses the word waterproof.

 

Link to comment
Share on other sites

On 6/15/2021 at 1:29 PM, Len33 said:

 

Divers' excepted, I personally cannot understand why anybody would want to take a watch into water.

 

I get it but i do want so sip on a nice margharita when i'm in the pool and not constantly have to take my watch of. I'm also very anxious with leaving stuff at the beach while i'm in the water so that's why I don't want to leave my watch laying around. 

Link to comment
Share on other sites

Ok. I hope your holiday goes well and that you enjoy your margarita on the beach.

However, I think that getting "Boris" to allow you to go away represents far more of a threat to your holiday than water entering your watch does!

Good luck.

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • These are all American movements (with the exception of the "Rubis"), and are all almost certainly "negative set" which means the stem is part of the case. So it's normal that they are all missing- they are with their cases. You will need male square bench keys to wind/disarm them. Vintagewatchstraps has a great writeup on the different systems. But basically, any American "x" size movement will fit any case for that size, possibly with some adjusting of the stem position. With Swiss movements, there is some interchangeability between calibers, usually within the same maker's range, but not really overall- there are thousands of different stems out there.
    • Hi, I'm very new to watchmaking and this is my first time posting here.  I've bought a lot of 10 vintage pocket watches size 0s from e-bay and just got them today.  Most of the balance wheels sprung quite freely and thus seemed like a worthy endeavor as a first batch for exploration.  I've just realized that none of them have any winding stems. Is there any way I could source appropriate winding stems for the movements? There seems to be assortments of various stems selling in bulk on aliexpress, but would any of them fit?  I've read on other threads that some people lathe their own stems (which is waaaay out of my current skill set, which is pretty much nil). Others say that you 'just have to try a few and see if they fit'. I would much appreciate any advice for this matter. Thanks!
    • Nice work.  In the last year, I have been servicing Accutron 218s.  I have the official Accutron hoder that provides electrical contact to the movement.  It is a pretty clever design.  There is a cut in the ring of the holder (shaped like a "C").  When in relaxed state, the holder is slightly smaller than the watch movement.  You spread the cut slightly and drop the movement in and release.  Very clean.  I have made 3D versions of this setup.  Have not explored using it generally for other movements.
    • Double Oooooo   Removal tool? Dreamed of one of these. However, Kalle on Chronoglide showed everyone my system with the pegwood. Worked a treat. Felt so chuffed to be mentioned. https://www.youtube.com/watch?v=tTFrXjiyGKc 46:40 for the wheel removal. Mentions me at 50:00 and does the removal with the pegwood. Felt like my 15 minutes of fame.  
    • Sirius. Thank you for helping others with that information. This is why this forum is so good.
×
×
  • Create New...