Jump to content

Tissot Movement identification


Recommended Posts

Hi

I've started to work on a vintage tissot for women 

The main plate have the inscription P.C or P.G. 194

I'm still unable to figure out what it is. I need this because the pivot of second hand is broken. In this watch the second hand is at separated at 6 o'clock 

Thanks for your help

IMG_20210608_210618.jpeg

oie_WGqeGCeuefyV.jpeg

IMG_20210608_213637.jpeg

Edited by richiesgr
Link to comment
Share on other sites

I worked on a similar sized ladies Tissot movement a year or 2 ago.  I have the parts list (pieces de rechange) of the movement.

This shows movements in Calibre 2400 series (2400,2401,2403,2404) and area all preceded by '13PC AM 17 pierres'.  The calibre of my movement was only indicated by a very small round stick on label  indicating it to be cal 2401 stuck to the non-dial side plate.    See attached pic, label is at 2 o'clock.  Maybe your PC19 is 19PC.

I think I got the info from the Tissot web site

 

P4150011.JPG

Edited by canthus
Link to comment
Share on other sites

8 hours ago, clockworksynergy said:

Hi you can look at mikrolisk site for a look up of makers marks.

FYI, we have a section here where it's considered polite for new members to introduce themselves. 

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Well done, let us know how you get on with the citizen. 
    • @Neverenoughwatches Rich, I can only agree with you wholeheartedly. I spend a lot of time here learning all sorts and trying to make any little contribution to help others I can. Nothing can last forever and I wish I could do more to contribute to the forum financially and any other support I could.   Tom
    • This forum is a big part of my life. When I retired from horology many years ago due to poor health I missed what I had trained for. On here I can still do my bit in helping and advising others and have a little fun as well.  
    • First thing this morning, make coffee, second, check the forum.  I would really miss the forum, not on any social media, not interested in telling the world what I had for breakfast!!! I do consider most of the regulars friends and would wonder what had happened if they stopped posting. 
    • Hi all Thought I'd show my small and trying to keep under control watch collection! Apart from the Enicar all were under £12! At least if I destroy them in the process then I won't be too worse off. A few pics to start off with First of all my first attempt. A Thuya pocket watch. It was only running face down and would stop when vertical. So now it still works face down and only slows down when vertical so at least an improvement! 😄  I only have a generic watch oil at the mo so that won't help but I'm hoping to get some more appropriate oils in a couple of months for my birthday. I did have to get a crystal for it since it didn't come with one. It didn't look as though it would friction fit (and I don't have a crystal press in any case) so I glued it to the case with PVA. So far so good. Next up above are a sekonda and citizen automatic. Both non runners. Both with broken balance wheels amongst other things. I'm hopeful the citizen will start when I get the new one I ordered but the sekonda is being kept for spares and trial of new techniques. And finally the Enicar and the timemaster. Both running when I got them. I wanted to get running watches so that at least I stood a fighting chance of still having a running watch after the service! It was all going well on the Enicar until I dropped the balance wheel during reassembly...😔. Unfortunately they are quite expensive to get so for now I'll won't do anything with it but I would like to fix it at one point. The timemaster is still running (yeah!) but I managed to break a dial foot during the deassembly. First repair attempt failed so now I am looking at soldering it back on... So there we go. My initial foray into this great hobby. Thanks for sticking with this tale so far.  I'm hoping that once the balance wheel arrives for the citizen I will be able to say I bought a non runner and fixed it! So fingers crossed. Thanks for looking, Nick
×
×
  • Create New...