Jump to content

Recommended Posts

Hello everyone,  

For awhile now I have been working on and designing my own watches. I am getting closer to having all the parts made for me and have started to think about assembly.  
I have been working on watches for a number of years now and I always thought little about the process of casing the watch up. It was just the final step. However now that I will be hopefully assembling a lot more watches I have begun to think more about the process and the tools that could make this process easier and ensure I have a professional final product. 
Some of the tools I have considered buying, 

- A vacuum tool for cleaning the inside of the case 

- A hand press for fitting hands  

- Plier style spring bar tool 

- Stem Cutter   

-Wooden tipped tweezers (handling the hands) 

I already own a case press and a variety of other tools. Does any one want to give me some thoughts about these tools or what you might recommend? The goal is to speed up assembly, assure no dust gets in the case and not mark up any components during assembly. I plan on spending around 3000 pounds. ($5000 CAD dollars)  

Cheers, 

Liam Branch 

Link to comment
Share on other sites

12 hours ago, LiamB said:

he goal is to speed up assembly, assure no dust gets in the case and not mark up any components during assembly.

For that you need a clean room, that is, air filtering, double doors, etc. There are compromises one can take if done in an home shop, e.g. carpets to attract most of the fibers in, portable filters, etc, maybe statically charged devices to attract dust, or other tricks.

For common casing tools see

 

Link to comment
Share on other sites

Not sure what you're up to, but it sounds like you're putting together your own watch, or watches, perhaps for sale? By "parts" I imagine you mean case, crystal, strap/bracelet, spring bars, movement, dial, and hands? It happens that I "build" my own watches but just for my personal use and enjoyment. The mentioned tools will be helpful but I think that a vacuum tool might be an overkill. A good blower should do just fine. This video could possibly be helpful.

 

Link to comment
Share on other sites

I recently got some new tools.  Here are my thoughts...

Plier style spring bar tool:  These really comes into their own when used on bracelets.  I've always found it difficult to remove spring bars when the curved ends are tightly fit against the case and there is no play to retract one end of the springbar and rest it against the case while attempting the other end.  The tool lets you move both at the same time.  It is tricky to get the hang of though and requires practice.  Once you've mastered it, it's a cinch.  For straps I still use the trusty 6767.

Wooden tipped tweezers:  I couldn't help myself buying these, I'm a sucker for tweezers.  Being extremely soft, they give you the confidence that you will not mark the hands.  I also use them for dials, date rings etc.  The are however clumsy (or is that me?) and don't give you the full control of a normal set of tweezers.  For sub second hands I use a jewel picker which is much quicker and give more control.

Some links

https://www.cousinsuk.com/product/boxwood-tipped-dumont

https://www.cousinsuk.com/product/cousins-swiss-style1

https://www.cousinsuk.com/product/jewel-picker-upper-with-silicone-tips

 

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • people be honest.... Swatch is evil for the watchmakers and repairers, BUT not everything in watches from Switzerland is from the Swatch-Group. As far as i know, Selitta got sacked by Swatch as a Movement-Assembler for them and they started to produce Movements in their own Name with slight Modifications. As far as i know, they sell Parts to the Market for their Movements. In most cases, if a ETA-Movement fails, it is a valid Option to replace it with a Selitta Movement, which i consider the Solution for this Mess with the Swatch-Group...... I have no Connection to anybody at Selitta, but being a Swiss-Guy, i still like to have Swiss-Made Watches, but not from the Swatch-Group.   ok ? regards, Ernst
    • Just one more greedy act by Swatch. They started a number of years ago here in the US..cutting off supplies to watchmakers that could build complications that many Swatch houses couldn't even touch. Old school masters who had gone through some of the most prestigious houses in the world. Otto Frei has some statements on their page about it. I tell all my customers to avoid new Swiss watches like the plague,..unless they just want an older one in their collection that still has some parts out on the market, or they have really deep pockets and don't mind waiting months and paying through the nose to get it back. Plenty of others to choose from..IE Seiko,..or other non-swiss brands Even a number of Chinese brands are catching up with the Swiss,..and I think that in time, their actions will be their downfall
    • Yes. If that's not what you are experiencing...start looking for something rubbing. A 1st guess is that one of the hands is rubbing against the hole in the center of the dial. Especially if you now have lower amplitude in face up/ face down positions.
    • Once a movement has the dial and hands put back and it is recased, would you expect the assembled watch to have the same amplitude as when the movement is in a movement holder and is without hands and dial? Thanks
    • C07641+ not sure what the "+" is for after the last digit.
×
×
  • Create New...